Denver CAU-430BT Handleiding

Denver Autoradio CAU-430BT

Lees hieronder de 📖 handleiding in het Nederlandse voor Denver CAU-430BT (20 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

MP3

INPUT

AUX

MIC

SCAN

AMS

BND MOD

RPT

MUTE

105

6+10

T/P

HANDLEIDING EIGENAAR

AUTO STEREO FM - RDS / BLUETOOTH / MP3 MET

USB-HOST / SD-SLEUF / AUX-INGANG

BILSTEREO FM - RDS / BLUETOOTH / MP3

MED USB VÄRD / SD SPÅR / AUX. INEFFEKT

KÖPARENS BRUKSANVISNING

English (P.1 - P.3)

Deutsch (P.3 - P.5)

Dansk (P.5 - P.7)

P.1

GENERAL OPERATION

English

1. POWER ON/OFF

Press this button to turn on the unit. To turn off, press this button more than 1 second.

2. BAND SELECTOR / PAUSE

a) Each time this button is pressed, the radio band is changed.

b) Press this button to pause the track during playback.

3. AUTO-STORE/PRE-SCAN BUTTON / REPEAT

a) Press this button more than 2 seconds, it searches all station frequencies upward and memorize automatically

to the 6 preset stations by catching the frequency. Press this button shortly, it re-calls the memorized station

frequencies (1-6) automatically every 5 seconds.

b) Press this button to repeat the track during playback.

4. LCD DIGITAL DISPLAY

5. DISPLAY BUTTON

This button serves to show available information.

7. PANEL RELEASE

This button is used to release the panel from the unit.

9. RDS (RADIO DATA SYSTEM)

You can enjoy RDS advantage on FM radio as follows:

lProgram Service Name (PS) : When RDS station is received, station's name will appear on the display.

lTraffic Program (TP) : When station with traffic program is received, “TP” indicator will appear on the display.

lWhen RDS is on, the unit will continue checking the signal of alternative frequencies from time to time. If the new

alternative frequency is stronger than current one, it automatically switch to the new frequency. When RDS is

flashing, the alternative frequency is searching but RDS signal is not received.

lEnhanced Other Networks (EON): When tune to a station which is linked to others by EON, the radio is capable of

receiving Traffic Announcement from the linked stations.

10. TA (TRAFFIC ANNOUNCEMENT) / PTY (PROGRAMME TYPE NAME)

a) Press this button shortly to select TA mode. When TA mode is on, it is able to receive traffic announcements or

stations with Traffic Program (TP). It works as follows: lIf the volume is low, it will be raised temporarily and will

back to original volume level after traffic announcement. lIf the radio is mute, it will be de-muted during traffic

announcement.

b) There are 2 series of programme type (PTY) available for PTY search tuning when you press the button for

longer than 1 second and then pressing any Station Preset Button (1-6) until the desired PTY code appears on

the display. The radio will stop on station transmitting the selected PTY code. Next PTY searching can be

activated by repeating the same procedure. During programme type searching, PTY button can be pressed to

stop searching and the radio will back to the original station. “PTY NONE” will appear on the display if the

selected PTY code is not receivable.

11. ANSWERING BUTTON FOR INCOMING CALLS

12. VOLUME/SELECTION (“VOL/SEL”)

a)Rotate this button clockwise to increase volume level and vice versa.

b)Press this button shortly to show Volume/Bass/Treble/Balance/Fader control. Then, rotate clockwise to

increase setting level and vice versa.

c)By pressing more than 2 seconds, and change the it activates the selection mode in cyclical position

setting by rotating the knob.

l BEEP ON / BEEP OFF (not available)

LOCATION OF CONTROLS TASTENBELEGUNG KNAPPER OG KO NTROLLER

SITUACIÓN DE LO S CO NTROLES LOCALIZAÇÃO DOS CO MANDOS PLACERING AV KONTROLLER

PLAATS VAN DE BED IENINGSELEMENTEN LAITTEEN SÄÄ TIMET

Español (P.8 - P.10)

Português (P.10 - P.12)

Svenska (P.12 - P.14)

Nederlands (P.14 - P.17)

Suomi (P.17 - P.19)

CAR STEREO FM - RDS / BLUETOOTH / MP3

WITH USB HOST / SD SLOT / AUX. INPUT

OWNER'S MANUAL

AUTORADIO UKW - RDS / BLUETOOTH / MP3

MIT USB-HOST / SD-SCHLITZ / AUX-EINGANG

BEDIENUNGSANLEITUNG

BILSTEREO MED FM RDS / BLUETOOTH / MP3

USB-TERMINAL / SD KORTLÆSER / AUX-TERMINAL

BETJENINGSVEJLEDNING

EQUIPO ESTÉREO FM - RDS / BLUETOOTH / MP3 PARA AUTOMÓVIL

CON ENTRADA AUX. / PUERTO USB / LECTOR SD

MANUAL DEL PROPIETARIO

ESTÉREO FM - RDS / BLUETOOTH / MP3 PARA CARRO

COM USB ANFITRIÃO / ENTRADA SD / AUX. ENTRADA

MANUAL DO PROPRIETÁRIO

KÄYTTÖOHJE

AUTOSTEREO FM - RDS / BLUETOOTHIN / MP3 JOSSA

USB-LIITÄNTÄ / SD-LUKIJA / AUX-LIITÄNTÄ

CAU-430BT

MP3

INPUT

AUX

MIC

SCAN

AMS

BN D MOD

RPT

MUTE

105

6 +10

T/P

RES ET

MP3

IN PU T

AUX

MIC

(16)

(3) (8)(2) (13) (4)(7) (1) (17)(20) (18)

(19) (12)(5) (6) (15) (9)(10) (11)

(14)

(20)

6. SCAN CONTROL

Press this button to scan the receivable FM stations during radio mode. When receivable stations are tuned in,

they are monitored for approximately 5 seconds before advancing to the next receivable station. Press this button

once again to stop scanning as desired.

8. MODE / MUTE

a) Briefly press this button to select Radio (TUNER), USB (USB-DRIV), SD (MEM-CARD), Auxiliary Input (AUX) or

A2DP (BT-PLAY) mode.

b) When pressing the button for more than 2 seconds, it will mute volume control.

SETTING CLOCK TIME MANUALLY

a) Press the button to show “XX’XX” and hold it until the display flash and release.

b) Rotate “VOL/SEL” button clockwise to set HOUR and anti-clockwise to set MINUTE.

13/14. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN

On radio mode, pressing this button more than 2 seconds, it will tune one frequency step higher or lower.

On USB/SD mode, pressing this button shortly will move to the one track higher or lower. Pressing more

than 2 seconds, it will move fast forward or backward to a specific position.

P.2 P.3

WIRE CONNECTION

ISO CONNECTOR

FROM CABLE SIDE

FOR 4 SPEAKERS

RIGHT REAR + RIGHT REAR

RIGHT FRONT + RIGHT FRONT

LEFT FRONT + LEFT FRONT

LEFT REAR + LEFT REAR

(GRAY) (GRAY/BLACK)

(PURPLE) (PURPLE/BLACK)

(GREEN) (GREEN/BLACK)

(WHITE) (WHITE/BLACK)

MEMORY

GROUNDIGNITION

(YELLOW)

(BLACK)(RED)

POWER

ANTENNA

(BLUE)

POWER

FROM CABLE SIDE

ISO CONNECTOR

FUSE 10A

ANTENNA

RCA LINE OUT

16. RESET

The reset button is located on the front of main panel. This reset circuitry is provided to protect the unit's

microprocessor. Whenever the reset button is activated, all preset memories content will be erased. It should only

be activated under the below conditions: a) Initial installation after all wires are completed. b) Abnormal operation.

17. AUXILIARY INPUT

Press MODE button (8) until the “AUX” mode is shown on display. The unit is ready to play files from the external

audio device.

19. USB HOST

Press MODE button (8) until the “USB” mode is shown on display. The unit is ready to play files from the USB

device.

TRACK SEARCH

Press and hold “AMS” button more than 2 seconds, “TRK SCH” will be shown on the display. Release the button

and “TRK 0” will appear on the display for you to enter the first digit of the number. Rotate the volume button to

shift number 0-9 in a loop. Then, press it shortly to set the first digit. Repeat the same procedure for the rest of the

digits. Once all digits are entered, press the volume button more than 2 seconds to start playing the selected track.

If you set a wrong track number (it does not exist) then “NO TRACK” will be shown on the display.

PAIRING

a) Press “VOL/SEL” button (12) for a second until “TA SEEK” is shown on the display. Then, continuously pressing

the button again until the word “PAIRING” appears on display. Press “VOL/SEL” button (12) for a second, then the

word "PAIRING" starts flashing on the display. b) Turn your mobile phone's Bluetooth Function On and follow your

mobile phone's instructions for pairing. c) When searching for a new device, select “CAR HANDSFREE”, enter the

passcode “0000” and confirm. d) Once pairng is completed, “DC-” will show on display and ready to start mobile

phone handsfree operation through the built-in microphone or external microphone. e) If pairing cannot be

completed in 2 minutes, just repeat the procedure again from above until “DC-” showing on display.

A2DP (Advance Audio Distribution Profile)

A2DP is designed to transfer a 2-channel stereo audio stream, like music from an MP3 player, to a headset or car

radio. The mobile phone paired with the car radio must support the A2DP feature in order to stream music. Press

the “MODE” button (8) to select the “BT-PLAY” mode, use your mobile and play any MP3 songs and the songs will

automatically transfer from your mobile into car radio speaker.

BASIC TELEPHONE OPERATION

Display incoming number :

It will show the incoming telephone number if your mobile network is available.

Answer a call :

Press the “ ” button (11) to answer a call .

Reject a call :

Press the “ ” button (5) to reject a call.

Hang up :

Press the “ ” button (5) to hang up during dialing or talking.

Last Number Redial :

Press the “ ” button (11) for 2 seconds to redial the last number.

Transfer Call between Headset and Car Speaker :

During conversation, press the “SCAN” button (6) to switch a call between “Your own Bluetooth Headset” and “Car

Radio Speaker”.

Last Pairing Retrieve :

When next ignition is activated again, press the “ ” button (11) for more than 2 seconds until “DC-” showing on

display, then the unit is ready to start mobile phone handsfree operation.

Note: Please temporarily disconnect the external audio device via the auxiliary input when you receive a incoming

call. Otherwise, you may hear some noise during conversation.

20. MICROPHONE

If the unit connects with the mobile phone via Bluetooth, use this microphone to answer a call.

18. SD CARD SLOT

Press MODE button (8) until the “SD CARD” mode is shown on display. The unit is ready to play files from the

SD card.

15. STATION PRESET BUTTON (1-6)

a)Each station preset can be store in FM1, FM2 and FM3 (18FM). Press the button shortly recalls the station

frequency which was memorized. b)It can be memorized the frequency stations manually on specific preset stations

by holding the desired specific preset station in 2 seconds. c) Press the preset 2 to scan the first 10 seconds of all

the tracks during USB/SD mode. d) USB/SD mode

e) Press the preset 5/6 to search -10/+10 track during USB/SD mode.

Press the preset 4 to play the tracks in random order during .

MP3 OPERATION

BLUETOOTH OPERATION

REMOVAL KEYS

INSTALLATION UNIT REMOVAL

1. Remove Front Panel and Frame.

2. Insert the removal keys into the slot and gently

to remove mounting case.

3. Keep removal keys in a safe

place for future removal

of unit.

Electric and electronic equipment contains materials, components and substances that can be hazardous to

your health and the environment, if the waste material (discarded electric and electronic equipment) is not

handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen left.

This symbol signifies that electric and electronic equipment should not be disposed of with other household

waste, but should be disposed of separately. All cities have established collection points, where electric and

electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or

be collected from the households. Additional information is available at the technical department of your city.

METAL

MOUNTING

STRIP

DASHBOARD

MOUNTING

CASE

CONSOLE

HEXAGON

NUT

HEXAGON

BOLT

ALLGEMEINE INBETRIEBNAHME

Deutsch

1. PWR (EIN-/AUSSCHALTEN)

Drücken Sie diese Taste, um das Gerät einzuschalten. Zum Ausschalten drücken Sie diese Taste länger

als 1 Sekunde.

3. AMS (AUTOM. SPEICHERN)/PRE-SCAN/RPT (WIEDERHOLEN)

a) Halten Sie diese Taste länger als 2 Sekunden gedrückt um nach allen Senderfrequenzen aufsteigend zu ,

suchen und automatisch die Frequenzen von 6 . voreingestellten Sendern zu speichern Mit einem kurzen

Tastendruck werden die gespeicherten Senderfrequenzen (1-6) 5 .automatisch alle Sekunden aufgerufen

b) Wiederholen Sie während der Wiedergabe mit dieser Taste den Track.

4. DIGITALES LCD-DISPLAY

5. DISP (ANZEIGETASTE)

Diese Taste zeigt die verfügbaren Informationen an.

“ ”

UHRZEIT MANUELL EINSTELLEN a) Drücken Sie die Taste zur Anzeige von XX'XX und halten Sie sie gedrückt, bis das Display blinkt.

b) Drehen Sie “VOL/SEL” nach rechts, um die STUNDEN und nach links, um die MINUTEN einzustellen.

7. BEDIENTEIL FREIGEBEN

Mit dieser Taste lösen Sie das Bedienteil vom Gerät.

6. SENDERSUCHE

Drücken Sie diese Taste im Radiomodus zum Suchen der verfügbaren UKW-Sender. Ein Sender bleibt

für ca. 5 Sekunden eingestellt, bevor das Gerät zum nächsten Sender umschaltet. Drücken Sie die Taste

erneut, um das Scannen zu unterbrechen.

8. MODUS / STUMM

a) Drücken Sie diese Taste zur Auswahl des Radio- (TUNER), USB- (USB-DRIV), SD- (MEM-CARD), AUX-

Eingangs- (AUX) oder A2DP- (BT-PLAY) Modus.

b) Halten Sie die Taste für 2 Sekunden gedrückt, um den Ton stummzuschalten.

2. BAND-AUSWAHL/PAUSE

a) Wechselt mit jedem Tastendruck das Frequenzband.

b) Hält mit einem Tastendruck die Trackwiedergabe vorübergehend an.

10.

a) Wählen Sie mit dieser Taste den TA-Modus: Wenn der TA-Modus eingeschaltet ist, können

Verkehrsmeldungen oder Sender mit Verkehrsnachrichten (TP) empfangen werden. Es funktioniert wie folgt:

lWenn die Lautstärke niedrig eingestellt ist, wird sie vorübergehend angehoben und kehrt nach der

Verkehrsmeldung zur ursprünglichen Lautstärke zurück.

lWenn das Radio stummgeschaltet wurde wird die Stummschaltung , während der Verkehrsmeldung

aufgehoben.

TA (VERKEHRSDURCHSAGEN) / PTY (PROGRAMMTYP)

b) Es sind 2 Arten von Programmtypen (PTY) für die PTY-Suche verfügbar, wenn Sie die Taste für 1 Sekunde

gedrückt halten und dann eine der Senderspeichertasten (1-6) drücken, bis der gewünschte PTY-Code

angezeigt wird. Das Radio sucht Sender, welche den gewählten PTY-Code übertragen. Die nächste PTY-

Suche wird auf gleiche Weise gestartet. Während der Programmtypsuche können Sie diese durch

9. RDS (RADIO DATA SYSTEM)

Sie können die Vorteile von RDS beim UKW-Radioempfang wie folgt genießen:

lProgrammdienstname (PS): Wenn ein RDS-Sender empfangen wird, erscheint der Sendername auf dem

Display.

lVerkehrsnachrichten (TP): Wenn ein Sender mit Verkehrsnachrichten empfangen wird, erscheint die

Anzeige “TP”auf dem Display.

lWenn RDS ist eingeschaltet, das Gerät wird auch weiterhin von Zeit zu Zeit das Signal auf alternative

Frequenzen überprüfen. Wenn eine neue alternative Frequenz stärker als die aktuelle ist, wird automatisch

zu der neuen Frequenz gewechselt. Wenn RDS blinkt alternative Frequenzen sucht aber es wurde kein , ,

RDS Signal empfangen- .

lEinblendung anderer Sender (EON): Beim Einschalten eines Senders, der mit anderen über EON

verbunden ist, kann das Radio Verkehrsdurchsagen von angeschlossenen Sendern empfangen.

microphone

Product specificaties

Merk:	Denver
Categorie:	Autoradio
Model:	CAU-430BT

Heb je hulp nodig?

Als je hulp nodig hebt met Denver CAU-430BT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Autoradio Denver

Denver CAD-495 Handleiding

30 Augustus 2023

Denver cau 410 Handleiding

30 Augustus 2023

Denver CAT-720TWIN Handleiding

30 Augustus 2023

Denver CAT-710SINGLE Handleiding

30 Augustus 2023

Denver CAD-490 Handleiding

8 Mei 2023

Denver CAD-471 Handleiding

23 April 2023

Denver CDB-440BT Handleiding

10 April 2023

Denver CAU-450BT Handleiding

23 Maart 2023

Denver CAD-452 Handleiding

23 Maart 2023

Denver CAT-131 Handleiding

3 Maart 2023

Handleiding Autoradio

Nieuwste handleidingen voor Autoradio

Deaf Bonce Machete MFA-1.1500 Handleiding

20 November 2024

Xblitz RF100 Handleiding

15 November 2024

Xblitz RF300 Handleiding

15 November 2024

Xblitz RF500 CAM Handleiding

15 November 2024

Xblitz RF350 CAM Handleiding

15 November 2024

Blaupunkt Alicante CD30 Handleiding

15 November 2024

JBL Grand Touring GTR-102 Handleiding

15 November 2024

Alpine CDA-7842R Handleiding

15 November 2024

Shuttle SCD-420 Handleiding

15 November 2024

JBL Celebrity 150 Handleiding

13 November 2024