Datalogic PowerScan PD830 Handleiding

Datalogic Barcode lezer PowerScan PD830

Lees hieronder de 📖 handleiding in het Nederlandse voor Datalogic PowerScan PD830 (2 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

procedures described therein may be reproduced or transmitted in any form or by any means without

prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" o

“Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable

license to reproduce and transmit this documentation for the purchaser's own internal business purposes.

Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting you

Datalogic representative. Electronic versions may either be downloadable from the Datalogic website

(www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to

make comments or suggestions about this or other Datalogic publications, please let us know via the

"Contact Datalogic" page.

DISCLAIMER

Datalogic has taken reasonable measures to provide information in this manual that is complete and

accurate, however, Datalogic reserves the right to change any specification at any time without prio

notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and the Datalogic logo is

a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All other trademarks and trade

names referred to herein are property of their respective owners.

SERVICE AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on to

www.scanning.datalogic.com and click on the links indicated for further information including:

• PRODUCTS

Search through the links to arrive at your product page where you can download specific Manuals

and Software & Utilities including:

- Datalogic Aladdin™, a multi-platform utility program that allows device configuration using a

PC. It provides RS-232 interface configuration as well as configuration barcode printing.

• SERVICE & SUPPORT

- Technical Support - Product documentation and programming guides and Technical Support

Department in the world

- Service Programs - Warranty Extensions and Maintenance Agreements

- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.

- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.

• CONTACT US

Information Request Form and Sales & Service Network

WARRANTY

Datalogic warranties this product against defects in workmanship and materials, for a period of 3 years

from the date of shipment, provided that the product is operated under normal and proper conditions.

Datalogic has the faculty to repair or replace the product; these provisions do not prolong the original

warranty term.

The warranty does not apply to any product that has been subject to misuse, accidental damage,

unauthorized repair or tampering.

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

USA 07

dichiara che

declares that the

déclare que le

bescheinigt, daß das Gerät

declare que el

POWERSCAN Dxxx

e tutti i suoi modelli

and all its models

et tous ses modèles

und seine Modelle

y todos sus modelos

sono conformi alle Direttive del Consiglio Europeo sottoelencate:

are in conformity with the requirements of the European Council Directives listed below:

sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:

den nachstehenden angeführten Direktiven des Europäischen Rats:

cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

89/336/EEC EMC Directive e 92/31/EEC, 93/68/EEC emendamenti successivi

and further amendments

et ses successifs amendements

und späteren Abänderungen

y succesivas enmiendas

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei

prodotti.

On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.

Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des

produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und

Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y

las Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

EN 55022 (C

LASS

A ITE), August 1994:

AMENDMENT A1 (CLASS A ITE), October 2000:

LIMITS AND METHODS OF MEASUREMENTS OF RADIO

DISTURBANCE CHARACTERISTICS OF INFORMATION

TECHNOLOGY EQUIPMENT

EN 61000-6-2, October 2001: ELECTROMAGNETIC COMPATIBILITY (EMC).

PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL

ENVIRONMENTS.

March 1st, 2007

PowerScan® D8330

READERS

QUICK REFERENCE GUIDE

820001940 (Rev. D) 02/08

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on

Internet.

Log on to: www.scanning.datalogic.com

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di

questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a: www.scanning.datalogic.com

Les versions mises à jour de drivers et documentation de ce produit sont

disponibles sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur : www.scanning.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für

dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch

verfügbar.

Adresse : www.scanning.datalogic.com

En Internet están disponibles las versiones actualizadas de los drivers y

documentación de este producto. También está disponible la versión en español

de este manual.

Dirección Internet : www.scanning.datalogic.com

CONNECTIONS

CONNECTING THE CABLE

A. Rubber gasket

B. Plastic boot

C. Cable spacer

D. Cover

E. Strain relief

cc Slip the cover over the

cable.

dd Push the plastic boot into

the rubber gasket. Take

care that the tab on the

plastic boot is aligned with

the notch in the rubber

gasket.

ee Push the plastic boot and

gasket into the handle.

Ensure that the “Front”

marking on the plastic boot

is facing out, with the

arrow .pointing towards

the front of the scanner.

ff Insert the cable into the

socket of the plastic boot.

gg Insert the cable spacer

into the cable wire and

slide it towards the handle.

hh Push the cover along the

cable towards the reader,

and hook it over the yellow

“tooth”.

ii Insert the strain relief into

the cover and tighten the

screw to fix the whole

assembly to the reader

handle.

COMPLIANCE

LASER SAFETY COMPLIANCE

The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and

EN60825-1 at the date of manufacture.

The laser light is visible to the human eye and is emitted

from the output window c.

Laser warning and classification label d.

CAUTION:

Use of controls or adjustments or performance o

procedures other than those specified herein may result in

exposure to hazardous visible laser light.

The laser scanner utilizes a low-power laser diode. Although staring directly at the laser beam

momentarily causes no known biological damage, avoid staring at the beam as one would with

any very strong light source, such as the sun. Avoid that the laser beam hits the eye of an

observer, even through reflective surfaces such as mirrors, etc.

The following information is shown on the laser scanner device class label:

LASER LIGHT - DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

MAX. OUTPUT RADIATION 1.4 mW

EMITTED WAVELENGTH 630~680 nm

EN60825-1: 2001

CAUTION - CLASS 2 LASER

LIGHT WHEN OPEN

AVOID EXPOSURE – LASER LIGHT

IS EMITTED FROM THIS APERTURE

DO NOT STARE INTO BEAM

This product complies with

21 CFR Subchapter J

ITALIANO LUCE LASER

NON FISSARE IL RAGGIO

APPARECCHIO LASER DI CLASSE 2

FRANÇAIS RAYON LASER

EVITER DE REGARDER LE RAYON

APPAREIL LASER DE CLASSE 2

DEUTSCH LASERSTRAHLUNG

NICHT IN DEN STRAHL BLICKEN

PRODUKT DER LASERKLASSE 2

ESPAÑOL RAYO LÁSER

NO MIRAR FIJO EL RAYO

APARATO LÁSERDE CLASE 2

LED CLASS

Class 1 LED product.

This product conforms to EN60825-1:2001.

USB

WEDGE

RS-232

PEN

CE COMPLIANCE

Warning:

This is a Class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of Datalogic

could void the authority to use the equipment.

This device complies with PART 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accep

any interference received, including interference which may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, i

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer which supplies

power directly to the reader or else be supplied by a UL Listed/CSA Certified Power Unit marked

“Class 2” or LPS power source rated 4 - 30 V, minimum 420 mA, which supplies power directly to

the reader via the power connector of the cable.

WEEE COMPLIANCE

For information about the disposal of Waste Electrical and Electronic

Equipment (WEEE), please refer to the website at

www.scanning.datalogic.com.

PATENTS

This product is covered by one or more of the following patents:

Design Pat. AU 310201; AU 310202; CN 693980; HK 0602013.5M001; HK 0602013.5M002; JP

1305693; KR 30-0460940.

US Pat. 5,992,740; 6,305,606 B1; 6,808,114 B1; 6,997,385 B2; 5,103,080; 5,262,627;

5,367,151; 5,449,893; 5,545,889; 5,917,173; 5,923,025; 5,945,659; 6,098,877; 6,220,514 B1;

6,607,132 B1; 6,817,529 B2; 6,834,805 B2.

European Pat. 789,315 B1; 895,175 B1; 1,128,315 B1.

Additional patents pending.

Notch

Align 3

Tab

Arrow

DEFAULT VALUES

USB-KBD DEFAULT SETTINGS

USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,

USB keyboard speed normal.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = ENTER, character replacement disabled.

RS-232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx

timeout 5 sec., ack/nack disabled, FIFO enabled, inter-character delay disabled,

serial trigger lock disabled.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = CR-LF, character replacement disabled.

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock

unchanged, inter-character and inter-code delays disabled, control character

emulation = ctrl+shift+key.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = ENTER, character replacement disable.

PEN DEFAULT SETTINGS

interpret operating mode, conversion to code 39 disabled, output level normal,

idle level normal, minimum output pulse 600 µs, overflow medium, inter-block

delay disabled.

CODE SELECTION

Enabled codes

• EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

• Interleaved 2/5

check digit control and transmission, variable length code; 4-99 characters

• Standard Code 39

no check digit control, variable length code; 1-99 characters

• Code 128

variable length code; 1-99 characters

Disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,

Code 11, Code 16K, Code 49, GS1 DataBar™ Codes

TECHNICAL FEATURES

PowerScan® D8330/ D8330 AR

Electrical Features PowerScan® D8330 PowerScan®

D8330 AR

Power Supply 4 to 30 VDC

Max. Consumption: 0.076 mm (3 mils) 0.25 mm (10 mils)

@ 4V

@5V

@30V

Sleep mode

420 mA

310 mA

62 mA

4 mA

500 mA

370 mA

70 mA

4 mA

Scan Rat 35 ± 5 scans/sec

Reading Indicators Good Read LED (green)

Good Read Spot (green), Beeper

Optical Features

Reading Field

(Typical performance at 20ºC /

68ºF on high quality barcodes)

110 cm (43.3 in)

@ 55 mils

1090 cm (429.13 in)

@ 100 mils reflective

Max. Resolution 0.076 mm (3 mils) 0.178 (7,5 mils)

PCS (Datalogic Test Chart) 15% 25%

Laser Features

Power (max) 0.9 mW 1.3 mW

Scan Angle 42° 13.5° ± 0.7

Laser Safety Class Class 2 EN 60825-1/CDRH

Environmental Features

Working Temperature -30 °C to + 50 °C / -22° to +122 °F

Storage Temperature -30 °C to + 70 °C / -22° to +158 °F

Humidity 90% non condensing

Drop Resistance IEC 68-2-32 Test ED 2 m

Protection Class IP65

Mechanical Features

Weight (without cable) about 295 g (10.4 oz)

Cable Length 2 m (6 ft 6 in)

RESTORE DEFAULT

Ì$+$*oÎ

To change the defaults refer to the PowerScan® D8330/M8330 Reference

Manual, or to the Datalogic Aladdin™ Configuration program, both downloadable

from the website.

INTERFACE SELECTION

Select one of the interface codes according to your application.

USB INTERFACE SELECTION

USB-KBD

Ì$+UA03$-:Î

USB-KBD-ALT-MODE

Ì$+UA04$-@Î

USB-COM*

Ì$+UA02$-4Î

USB-IBM-Hand Held

Ì$+UA01$-.Î

USB-IBM Table top

Ì$+UA00$-(Î

USB KBD-APPLE

Ì$+UA05$-FÎ

* When configuring USB-COM, the relevant files and drivers must be installed

from the USB Device Installation software, which can be downloaded from the

web site http://www.scanning.datalogic.com.

PEN EMULATION INTERFACE SELECTION

PEN

Ì$+CP6$

BÎ

RS-232 INTERFACE SELECTION

RS-232 Standard

Ì$+CP0$-$Î

Nixdorf Mode A

Ì$+CM2EC0$->Î

Fujitsu

Ì$+CM1$-ÈÎ

ICL Mode

Ì$+CM0$-ÃÎ

WEDGE INTERFACE SELECTION

Wedge IBM AT or PS/2 PCs

Ì$+CP500$-aÎ

PC Notebook

Ì$+CP505$-ÈÎ

PC Notebook - ALT mode

Ì$+CP508$-2Î

IBM AT - ALT mode

Ì$+CP507$-+Î

Interface for IBM XT and IBM Terminals 3151, 347X and 348X can be selected

from the PowerScan D8330/M8300 Reference Manual available online at

http://www.scanning.datalogic.com.

KEYBOARD NATIONALITY

USB-KBD and Wedge users should select one of the following wedge keyboard

nationality codes according to the keyboard.

Belge

Ì$+FJ7$-8Î

Deutsch

Ì$+FJ3$-$Î

English

Ì$+FJ4$-)Î

Español

Ì$+FJ6$-3Î

Français

Ì$+FJ2$-ÊÎ

Italiano

Ì$+FJ1$-ÅÎ

Svenskt

Ì$+FJ5$-.Î

USA (Default)

Ì$+FJ0$-|Î

The following Keyboard Nationality selections are only valid for IBM AT compatible

PCs:

Japanese

Ì$+FJ8$-=Î

Russian (Latin)

Ì$+FJ9$-BÎ

Russian (Cyrillic)

Ì$+FJA$-jÎ

Hungarian

Ì$+FJB$-oÎ

Slovenian, Croatian, Serbian (Latin)

Ì$+FJC$-tÎ

Romanian

Ì$+FJD$-yÎ

Czech Republic

Ì$+FJE$-~Î

USING POWERSCAN® D8330/D8330 AR READERS

PowerScan® D8330 readers automatically scan barcodes at a distance. Simply

aim and pull the trigger. Code scanning is performed along the scan line emitted

from the reading window. This line must cross the entire code. The best reading

angles are indicated in the figure below.

AIMING SYSTEM

PowerScan® D8330 and PowerScan® D8330 AR provides an aiming system. I

enabled, a partial trigger press produces a red spot, which should be aimed ove

the code center to get the best reading performance (see figure above, c). B

completely pressing the trigger the scan line appears to start code scanning d.

After setting up the reader, you can enable or disable the aiming system by

reading the codes below:

Disable Aiming System (Default)

Ì$+Bj0$-"Î

Enable Aiming System

Ì$+Bj1$-'Î

DATA FORMAT TERMINATORS

For your convenience, some common Terminators are given below. For other

Header/Terminator selections, Data Format and Advanced Data Format

parameters, see the PowerScan® D8330/M8330 Reference Manual.

CR-LF

Ì$+EA120D0A$-ÃÎ

Enter

Ì$+EA1183$-0Î

Tab

Ì$+EA1184$-8Î

None

Ì$+EA10$-dÎ

OPERATING TEST

Read the TEST code below.

Code 128

t e s t

Product specificaties

Merk:	Datalogic
Categorie:	Barcode lezer
Model:	PowerScan PD830
Kleur van het product:	Geel
Gewicht:	295 g
Snoerlengte:	2.4 m
Ingangsspanning:	4 - 30 V
Temperatuur bij opslag:	-30 - 50 °C
Stroomverbruik:	420 mA
Veiligheid:	CDRH 21 CFR 1040, EN60825-1, EU RoHS
Standaard interfaces:	RS-232,USB,Keyboard wedge
Afmetingen (B x D x H):	207 x 69 x 114 mm
Bedrijfstemperatuur (T-T):	-30 - 50 °C
Bereik kantelhoek:	5 - 55 °
Lichtbron:	630 - 680
Scansnelheid:	35 sec/pagina
Werkafstand:	21 mm
Decoding standaarden:	1D/GS1 DataBar\n16K\n49\nGS1 DataBar Expanded/Stacked/Stacked Omnidirectional