Datalogic Heron Handleiding

Datalogic Barcode lezer Heron

Lees hieronder de 📖 handleiding in het Nederlandse voor Datalogic Heron (2 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683- 5700

Fax: (541) 345- 7140

procedures described therein may be reproduced or transmitted in any form or by any mean

without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliate

("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non

exclusive, revocable license to reproduce and transmit this documentation for the purchaser'

own internal business purposes. Purchaser shall not remove or alter any proprietary notices

including copyright notices, contained in this documentation and shall ensure that all notice

appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions b

contacting your Datalogic representative. Electronic versions may either be downloadable from

the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you

visit our website and would like to make comments or suggestions about this or other Datalogi

publications, please let us know via the "Contact Datalogic" page.

DISCLAIMER

Datalogic has taken reasonable measures to provide information in this manual that is complet

and accurate, however, Datalogic reserves the right to change any specification at any tim

without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries an

the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. A

other trademarks and trade names referred to herein are property of their respective owners

SERVICE AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on t

www.scanning.datalogic.com and click on the links indicated for further information including:

PRODUCTS

Search through the links to arrive at your product page where you can download specific

Manuals Software & Utilities and including:

- Datalogic Aladdin™ a multi-platform utility program that allows device configuration

using a PC. It provides RS-232 interface configuration as well as configuration barcode

printing.

SERVICE & SUPPORT

- Technical Support - Product documentation and programming guides and Technica

Support Department in the world

- Service Programs - Warranty Extensions and Maintenance Agreements

- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA

Repairs.

- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.

Information Request Form and Sales & Service Networkies

Datalogic Scanning, Inc.

959 Terry Street

Eugene, OR 97402

USA

dichiara che

declares that the

déclare que le

bescheinigt, daß das Gerät

declare que el

HERON Dxxx

e tutti i suoi modelli

and all its models

et tous ses modèles

und seine Modelle

y todos sus modelos

sono conformi alle Direttive del Consiglio Europeo sottoelencate:

are in conformity with the requirements of the European Council Directives listed below:

sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:

den nachstehenden angeführten Direktiven des Europäischen Rats:

cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:

89/336/EEC EMC Directive

92/31/EEC, 93/68/EEC

emendamenti successivi

and

further amendments

ses successifs amendements

und

späteren Abänderungen

succesivas enmiendas

Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei

prodotti.

On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.

Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.

Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und

Produktsicherheit entsprechen.

Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las

Medidas de seguridad relativas al producto.

Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:

This declaration is based upon compliance of the products to the following standards:

Cette déclaration repose sur la conformité des produits aux normes suivantes:

Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:

Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:

EN 55022 (C B ITE), August LASS 1994:

A A1 (C B ITE), October 2000:MENDMENT LASS

LIMITS AND METHODS OF MEASUREMENTS OF RADIO

DISTURBANCE CHARACTERISTICS OF INFORMATION

TECHNOLOGY EQUIPMENT

EN 55024, EPTEMBER S 1998:

I NFORMATION TECHNOLOGY EQUIPMENT

I MMUNITY CHARACTERISTICS

L IMITS AND METHODS OF MEASUREMENT

March 1st, 2007

Heron ™

D130 READERS

QUICK REFERENCE GUIDE

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on

Internet.

Log on to: www.scanning.datalogic.com

Su Intern sono disponibili le versioni aggiornate di driver e documentazione di et

questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a: www.scanning.datalogic.com

Les versions mises à jour de drivers et documentation de ce produit sont

disponibles sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur : www.scanning.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für

dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch

verfügbar.

Adresse : www.scanning.datalogic.com

En Internet están disponibles las versiones actualizadas de los drivers y

documentación de este producto. También está disponible la versión en español

de este manua l.

Dirección Internet : www.scanning.datalogic.com

CONNECTIONS

WEDGE

RS-232

PEN

USB

COMPLIANCE

LED CLASS

Class 1 LED product.

This product conforms to EN60825-1:2001.

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval

of Datalogic could void the authority to use the equipment.

This device complies with PART 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference which

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer

which supplies power directly to the reader or else be supplied by a UL Listed/CSA

Certified Power Unit marked “Class 2” or LPS power source rated 5 V, minimum 180

mA, which supplies power directly to the reader via the power connector of the

cable.

WEEE COMPLIANCE

DISCONNECTING THE CABLE

PATENTS

This product is licensed under the following U.S. patent: 6,158,661

This product is covered by one or more of the following patents:

U.S. patents 5,992,740; 6,305,606 B1; 6,631,846 B2; 6,517,003 B2; 6,712,271 B2; 6,808,114

B1; 6,817,525 B2; and 6,834,806 B2

European patents 851,378 B1; 895,175 B1; 962,880 B1; 997,760 B1; 1,128,315 B1; and

1,164,536 B1

Additional patents pending.

Warranty Coverage

Datalogic warranties this product against defects in workmanship and materials, for a period of

years from the date of shipment, provided that the product is operated under normal and prope

conditions.

Datalogic Scanning ("Datalogic") hardware products are warranted against defects in materia

and workmanship under normal and proper use. The liability of Datalogic under this warranty i

limited to furnishing the labor and parts necessary to remedy any defect covered by this warrant

and restore the product to its normal operating condition. Repair or replacement of product durin

the warranty does not extend the original warranty term. Products are sold on the basis o

specifications applicable at the time of manufacture and Datalogic has no obligation to modify o

update products once sold.

If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, a

its sole option repair or replace the product without additional charge for parts and labor, or cred

or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic ma

use new or reconditioned parts, components, subassemblies or products that have been teste

as meeting applicable specifications for equivalent new material and products. Customer w

allow Datalogic to scrap all parts removed from the repaired product. The warranty period sha

extend from the date of shipment from Datalogic for the duration published by Datalogic for th

product at the time of purchase (Warranty period). Datalogic warrants repaired hardware device

against defects in workmanship and materials on the repaired assembly for a 90 day perio

starting from the date of shipment of the repaired product from Datalogic or until the expiration o

the original warranty period, whichever is longer. Datalogic does not guarantee, and it is no

responsible for, the maintenance of, damage to, or loss of configurations, data, and application

on the repaired units and at its sole discretion can return the units in the "factory default

configuration or with any software or firmware update available at the time of the repair (othe

than the firmware or software installed during the manufacture of the product). Customer accept

responsibility to maintain a back up copy of its software and data.

Warranty Claims Process

In order to obtain service under the Factory Warranty, Customer must notify Datalogic of th

claimed defect before the expiration of the applicable Warranty period and obtain from Datalogi

a return authorization number (RMA) for return of the product to a designated Datalogic service

center. If Datalogic determines Customer's claim is valid, Datalogic will repair or replace produc

without additional charge for parts and labor. Customer shall be responsible for packaging an

shipping the product to the designated Datalogic service center, with shipping charges prepaid

Datalogic shall pay for the return of the product to Customer if the shipment is to a location withi

the country in which the Datalogic service center is located. Customer shall be responsible fo

paying all shipping charges, duties, taxes, and any other charges for products returned to an

other locations. Failure to follow the applicable RMA policy, may result in a processing fee

Customer shall be responsible for return shipment expenses for products which Datalogic, at it

sole discretion, determines are not defective or eligible for warranty repair.

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by

other than Datalogic service personnel or its authorized representatives;

(ii) any claimed defect, failure or damage which Datalogic determines was caused by

faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper

storage or use of parts or accessories not approved or supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other

instrument, equipment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper maintenance,

including but not limited to cleaning the upper window in accordance with product

manual;

(v) any defect or damage caused by natural or man-made disaster such as but not

limited to fire, water damage, floods, other natural disasters, vandalism or abusive

events that would cause internal and external component damage or destruction of

the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for example

firmware or software upgrades, software or hardware reconfigurations etc.;

(vii) the replacement of upper window/cartridge due to scratching, stains or other

degradation and/or

(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch

screen, triggers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this warranty excep

to a purchaser or transferee of product. No attempted assignment or transfer in violation of thi

provision shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT

LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE

FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE

REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET

FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE

REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE

LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY

INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES

REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY

OF SUCH DAMAGES.

Risk of Loss

Customer shall risk of loss or damage for product in transit to Datalogic. Datalogic shabear

assume risk of loss or damage for product in Datalogic's possession. In the absence of specif

written instructions for the return of product to Customer, Datalogic will select the carrier, bu

Datalogic shall not thereby assume any liability in connection with the return shipment.

DEFAULT VALUES

USB-KBD DEFAULT SETTINGS

USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,

control character emulation = ctrl+shift+key.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, no header, terminator = ENTER, character replacement disabled.

RS232 Standard DEFAULT SETTINGS

9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx

timeout 5 sec., ack/nack disabled, FIFO enabled, serial trigger lock disabled.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, , character replacement disabled. no header, terminator = CR-LF

WEDGE DEFAULT SETTINGS

USA keyboard, caps lock off, caps lock au -recognition enabled, num lock to

unchanged, inter-character and inter-code delays disabled, control character

emulation = ctrl+shift+key.

DATA FORMAT: code identifier disabled, no field adjustment, code length not

transmitted, , character replacement disable. no header, terminator = ENTER

PEN DEFAULT SETTINGS

interpret mode, conversion to code 39 disabled, output level normal, idle level

normal, minimum output pulse 600 s, overflow medium, inter-block delay disabled.

CODE SELECTION

Enabled codes

EAN 8/EAN 13 / UPC A/UPC E without ADD ON

check digit transmitted, no conversions

Interleaved 2/5

check digit control and transmission, variable length code; 4-99 characters

Standard Code 39

no check digit control, variable length code; 1-99 characters

Code 128

variable length code; 1-99 characters

Disabled codes

EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,

Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49, RSS Codes

TECHNICAL FEATURES

Heron D130

Electrical Features

Power Supply

-232 interface RS

5 Vdc 5%

Consumption:

Maximum

Operating

Sleep mode/USB Suspend

180 mA @ 5 Vdc

155 mA @ 5 Vdc

< 2,5 mA @ 5 Vdc

Max. Scan Rate

256 scans/sec

Reading Indicators

LED, Good Read Spot, Beeper

Optical Features

Sensor

CCD solid state (2048 pixels)

Illuminator

LED array

Wavelength

630 ~ 670 nm

Max. LED Output Power

0.31 mW

LED Safety Class

Class 1 EN 60825-1

Reading Field

2 ~ 27 cm (20 mils)

Max. Resolution

0.10 mm (4 mils)

PCS (Datalogic Test Chart)

min. 15%

Environmental Features

Working Temperature

0 C to + 55 C (+32° to +131 °F)

Storage Temperature

-20 C to + 70 C (-4° to +158 °F)

Humidity

90% non condensing

Drop Resistance

IEC 68-2-32 Test ED

1.8 m (5.9 ft)

ESD Protection

16 KV

Protection Class

IP30

Mechanical Features

Weight (without cable)

about 160 g (5.6 oz)

Cable Length

2 m (6 ft 6 in)

RESTORE DEFAULT

Ì$+$*oÎ

To change the defaults refer to the HHD II Software Configuration Manual, or to the

Datalogic Aladdin Configuration program, both downloadable from the website.

INTERFACE SELECTION

Select one of the interface codes according to your application.

USB INTERFACE SELECTION

USB- KBD

Ì$+UA03$- :Î

USB-KBD - ALT-mode

Ì$+UA04$- @Î

USB-COM *

Ì$+UA02$- 4Î

USB-IBM-Hand Held

Ì$+UA01$- .Î

* When configuring USB-COM, the relevant files and drivers must be installed from

the USB Device Installation software, which can be downloaded from the web

site http://www.datalogic.com.

PEN EMULATION INTERFACE SELECTION

PEN

Ì$+CP6$- BÎ

RS-232 INTERFACE SELECTION

RS-232 Standard

Ì$+CP0$- $Î

Nixdorf Mode A

Ì$+CM2EC0$- >Î

Fujitsu

Ì$+CM1$- ÈÎ

ICL Mode

Ì$+CM0$- ÃÎ

WEDGE INTERFACE SELECTION

Wedge IBM AT or PS/2 PCs

Ì$+CP500$- aÎ

PC Notebook

Ì$+CP505$- ÈÎ

PC Notebook - ALT mode

Ì$+CP508$- 2Î

IBM AT - ALT mode

Ì$+CP507$- +Î

Many other interfaces are supported and can be selected from the HHD II Software

Configuration Manual available online at datalogic.com. Other supported interfaces:

USB: USB-IBM-Table Top; USB- -APPLE KBD

WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx,

34xx, 37xx; Wyse Terminals ANSI – PC –ASCII – VT220 style Keyboards; Digital

Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus

KEYBOARD NATIONALITY

USB-KBD and Wedge users should select one of the following wedge keyboard

nationality codes according to your keyboard.

Belge

Ì$+FJ7$- 8Î

Deutsch

Ì$+FJ3$- $Î

English

Ì$+FJ4$- )Î

Español

Ì$+FJ6$- 3Î

Français

Ì$+FJ2$- ÊÎ

Italiano

Ì$+FJ1$- ÅÎ

Japanese

Ì$+FJ8$- =Î

Svenskt

Ì$+FJ5$- .Î

USA (Default)

Ì$+FJ0$- |Î

DATA FORMAT TERMINATORS

For your convenience, some common Terminators are given below. For other

Header/Terminator selections, Data Format and Advanced Data Format

parameters, see the HHD II Software Configuration Manual.

CR- LF

Ì$+EA120D0A$- ÃÎ

Enter

Ì$+EA1183$- 0Î

Tab

Ì$+EA1184$- 8Î

None

Ì$+EA10$- dÎ

OPERATING TEST

Read the TEST code below.

Code 128

t e s t

USING HERON SERIES READERS

Heron readers automatically scan barcodes . Simply aim and pull at a distance

the trigger. Code scanning is performed along the center of the light bar emitted

from the reading window. This bar must cover the entire code.

Successful scanning is obtained by tilting the scanner with respect to the barcode

to avoid direct reflections, which impair the reading performance ee the figure (s

above).

Successful reading is signaled by an audible tone plus a good-read green spot.

Once the reade is correctly inserted into the stand, it is immediately ready to r

automatically read any code present in its reading area without pressing the trigger.

Furthermore, a green aiming light is continuously emitted to facilitate the positioning

of the barcode to be read (see the figure above).

To guarantee single code reading, same code consecutive reading requires the

code to be removed from the reading area (no decoding) before the reader will

accept the same code.

STAND INSTALLATION

The stand can be mounted by using self-tapping screws, double sided adhesive

strips or rubber feet:

A) Mount the stand directly to the surface using the self-tapping screws;

B) Carefully clean the bottom surface of the stand and the table surface.

Remove the protective plastic from one side of the adhesive strips and stick

them on the stand bottom. Then, remove the plastic from the other side of the

strips and affix the stand to the table;

C) Carefully clean the bottom surface of the stand, remove the protective film

from the rubber feet and stick them in the corresponding housing on the

bottom surface. It is also possible to fix an optional metal plate. af

INSERTION INTO STAND

Pair the reader to the stand, taking care to insert the handle into the stand clip (see

figure above). Correct insertion will be signaled by a beep; then, the reader will be

ready to read barcodes.

Product specificaties

Merk:	Datalogic
Categorie:	Barcode lezer
Model:	Heron
Kleur van het product:	Zwart
Gewicht:	160 g
Breedte:	68 mm
Diepte:	152 mm
Hoogte:	153 mm
Snoerlengte:	2 m
Soort:	Vaste streepjescodelezer
Materiaal behuizing:	Polycarbonaat (PC)
Internationale veiligheidscode (IP):	IP30
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Type stroombron:	USB
Meegeleverde kabels:	USB
Waarschuwingssignaal:	Ja
Certificering:	IEC 60825 Class 1
Type beeldsensor:	CCD
Duurzaamheidscertificaten:	RoHS
Ingangsspanning:	5 V
Temperatuur bij opslag:	-20 - 70 °C
Golflengte:	640 nm
Stroomverbruik:	155 mA
Ondersteunde streepjescodes (1D):	Codabar,Code 11,Code 128,Code 39,Code 93,Plessey,Telepen
Standaard interfaces:	USB
Bedrijfstemperatuur (T-T):	0 - 55 °C
Pitch lees-hoek:	75 °
2D ( matrix en gestapeld ) barcodes ondersteund:	Niet ondersteund
Yaw lees-hoek:	70 °
Tilt lees-hoek:	30 °
Lees-snelheid (max):	256 lezingen/s
Werkafstand:	210 mm