Datalogic DS8100A Handleiding

Datalogic Barcode lezer DS8100A

Lees hieronder de 📖 handleiding in het Nederlandse voor Datalogic DS8100A (141 pagina's) in de categorie Barcode lezer . Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/141

DS8100A

Reference Manual

Datalogic Automation Srl

Via Lavino, 265

40050 - Monte S. Pietro

Bologna - Italy

DS8100A Reference Manual

Ed.: 10/2012

extent under U.S. and international laws. Copying, or altering of this document is prohibited without

express written consent from Datalogic Automation S.r.l.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,

including the U.S.A. and the E.U.

Genius, PackTrack, ACR, ASTRA, CD SQUARE and ID-NET are trademarks of Datalogic Automation

S.r.l. All other brand and product names mentioned herein are for identification purposes only and may

be trademarks or registered trademarks of their respective owners.

Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for

incidental or consequential damages resulting from the use of this material.

02/10/12

iii

CONTENTS

REFERENCES ............................................................................................................ vi

Reference Documentation ........................................................................................... vi

Services and Support .................................................................................................. vi

Patents......................................................................................................................... vi

COMPLIANCE............................................................................................................ vii

Electrical Safety ...........................................................................................................vii

Laser Safety.................................................................................................................vii

Power Supply..............................................................................................................viii

CE Compliance...........................................................................................................viii

FCC Compliance ......................................................................................................... ix

GENERAL VIEW .......................................................................................................... x

GUIDE TO INSTALLATION ....................................................................................... xii

Point-to-Point Installation.............................................................................................xii

Master/Slave Lonworks Installation ............................................................................xiii

1 1 INTRODUCTION ..........................................................................................................

1.1 Product Description ...................................................................................................... 1

1.2 Applications .................................................................................................................. 1

1.3 Model Description.........................................................................................................3

1.4 Oscillating Mirror Models ..............................................................................................3

1.5 Indicators ...................................................................................................................... 4

1.6 Keypad and Display......................................................................................................5

1.6.1 Internal Net ...................................................................................................................5

1.6.2 Test Mode.....................................................................................................................5

1.6.3 PackTrack (Auto) ..........................................................................................................6

1.7 Auto PackTrack™ Calibration for Reading Station Using Scanner Menu .................... 7

1.7.1 Auto PackTrack Conditions and Limits .........................................................................7

1.7.2 Auto PackTrack Parameter Descriptions......................................................................8

1.7.3 Auto PackTrack Setup ..................................................................................................9

1.8 Accessories ................................................................................................................12

2 INSTALLATION ......................................................................................................... 14

2.1 Package Contents ......................................................................................................14

2.2 Mechanical Mounting..................................................................................................15

2.2.1 Mounting the Scanner.................................................................................................15

2.2.2 Mounting the Scanner with Accessories.....................................................................16

2.3 Positioning the Scanner..............................................................................................18

3 CBX ELECTRICAL CONNECTIONS......................................................................... 19

3.1 Power Supply..............................................................................................................21

3.2 Main Serial Interface...................................................................................................21

3.2.1 RS232 Interface..........................................................................................................22

3.2.2 RS485 Full-Duplex Interface.......................................................................................23

3.2.3 RS485 Half-Duplex Interface ......................................................................................24

3.3 Auxiliary RS232 Interface ...........................................................................................26

3.4 Inputs .......................................................................................................................... 27

3.4.1 Code Verifier...............................................................................................................31

3.5 Outputs .......................................................................................................................31

10.3.1 ASR Network Configuration...................................................................................... 108

10.3.2 Scanner Replacement Procedure............................................................................. 108

11 109 TROUBLESHOOTING .............................................................................................

12 112 TECHNICAL FEATURES.........................................................................................

A ALTERNATIVE LAYOUTS ......................................................................................114

Point-to-Point ............................................................................................................114

ID-NET™ Gateway ...................................................................................................116

Pass Through ...........................................................................................................117

RS232 Master/Slave.................................................................................................118

Multiplexer ................................................................................................................120

GLOSSARY.............................................................................................................. 121

INDEX.......................................................................................................................124

Figure C – Display and Keypad Panel

Programming Keypad

Power On LED (Green)

Phase On LED

(

Yellow

)

Encoder LED (Yellow)

TX Data LED (Green)

Network LED (Red)

LCD Display

Figure D – Connector Panel for Standard Models

Lonworks 17-pin male connector

Lonworks 17-pin female connector

Serial interface and I/O 26-pin connector

Figure E – Connector Panel for Ethernet Models

Figure F – Connector Panel for (older) Ethernet Models

Lonworks 17-pin male connector

Lonworks 17-pin female connector Harting RJ industrial connector

2 4

Serial interface and I/O 26-pin connector

2 3 4 5 6

Lonworks 17-pin male connector

Lonworks 17-pin female connector Ethernet M12 4-pin female connector

2 4

Serial interface and I/O 26-pin connector

xiii

MASTER/SLAVE LONWORKS INSTALLATION

The following can be used as a checklist to verify all the steps necessary to complete

installation of the DS8100A scanner in a Master/Slave Lonworks network.

1) Read all information in the section “Safety Regulations” at the beginning of this manual.

2) Correctly mount the scanner according to the information in par. 2.2 and position it at the

correct reading distance as shown in par. 2.3 and par. 9.4.

3) Make electrical connections to your DS8100A scanner by:

a) Connecting the DS8100A Master scanner to the CBX100 by means of one of the

CAB-F0x cables provided as accessory (see par. 1.8).

b) Correctly terminating the DS8100A Master reader according to the information given

in par. 5.1 and par. 7.1.

c) Completing the system wiring adding as many slave scanners as required by your

system layout (refer to par. 7.1).

d) Correctly providing bus return to the last DS8100A Slave reader of the network

according to the information given in par. 5.1 and par. 7.1.

4) Install and run the Genius™ configuration program from the CD-ROM provided.

Configure the Local Lonworks Network using one of the procedures given below :

 Configure the entire network through the Master as described in par. 8.2.2;

 Configure the Master as described in par. 8.2.2 and locally define each slave scanner

address as described in par. 8.2.3.

 Define each scanner, master and slaves (with their addresses), by using the scanner

keypad according to the information given in par. 1.6.1.

5) Configure the Master scanner through the Genius™ program. See chapter 8 and the

Help On-Line for details. The main steps are:

 Select the codes to be read

 Set-up the communication parameters

 When PackTrack™ is required, perform PackTrack™ calibration, see par. 9.2.1.

 Define data formatting parameters

6) Configure each Slave scanner through the Master scanner using Genius™. See chapter

8 and the Help On-Line for details. The main steps are:

 Select the codes to be read

 When PackTrack™ is required, perform PackTrack™ calibration, see par. 9.2.1.

NOTE

Fine tuning of the scanner position for barcode reading can be

accomplished by performing a test through the SPY configuration tool in

Genius™.

INTRODUCTION

1 INTRODUCTION

1.1 PRODUCT DESCRIPTION

The DS8100A scanner is a barcode reader complete with decoder designed to provide an

innovative and high performance solution in omnidirectional reading applications by

combining the following advanced technologies with Datalogic solid experience in the

material handling sector.

Some of the main features of DS8100A are listed below:

 scanning speed 1000 scans/sec.

 reads all popular codes.

 supply voltage from 20 to 30 Vdc.

 test mode to verify the reading features and exact positioning of the scanner without the

need for external tools.

 programmable in several different operating modes to suit the most various barcode

reading system requirements.

 light source: solid state laser diodes; the light emitted has a wave length between

630~680 nm. For laser safety precautions refer to the “Compliance” section at the

beginning of this manual.

1.2 APPLICATIONS

The DS8100A barcode reader is specifically designed for industrial applications and for all

cases requiring high reading performance such as:

 code reconstruction

 reading of codes covered by plastic film

 reading of codes with a wide depth of field

 reading of high resolution codes positioned at long distances from the reader

 code reading on fast moving objects.

DS8100A is designed for both single-reader layouts and multi-reader layouts. For typical

layouts see chapter 7 and appendix A.

INTRODUCTION

Feature Benefit

Energy Saving  A software parameter group which allows

management of the energy saving feature. In

particular, it allows turning on/off the motor and

laser of all network scanners according to the

selected digital input, encoder, or communication

channel.

 The time required to restart the system is less

than 1 minute independently from the number of

scanners connected.

 It is suggested to use this parameter for example

when the conveyor is stopped for a lengthy

period.

1.3 MODEL DESCRIPTION

The DS8100A scanner is available in versions that differ depending on the interface

connection, the optical resolution and on the optic version:

DS8100A - X X X

tic Version:

0 = Linear

tical Resolution:

0 = Low resolution

1 = Medium resolution

Communication Type:

0 = Standard version

1 = Ethernet version 2 = High resolution

3 = Very High resolution

5 = Oscillating mirror

Laser Number:

2 = Double laser

3 = Tri

le laser

1.4 OSCILLATING MIRROR MODELS

Oscillating mirror models are used when coverage of a large reading area is required, mainly

in picket fence applications.

The oscillating mirror is placed in front of the reading aperture of the DS8100A scanner to

deflect the laser beam. As the mirror moves, this sweeping function of the laser beam allows

the coverage of a larger area to locate the barcodes. The code can also be reconstructed as

the beam sweeps over it.

Product specificaties

Merk:	Datalogic
Categorie:	Barcode lezer
Model:	DS8100A
Kleur van het product:	Grey, White
Gewicht:	5000 g
Materiaal behuizing:	Aluminium
Stroomvoorziening:	30 VCD
LED-indicatoren:	Stroom
Beeldscherm:	LCD
Gewicht basisstation:	6400 g
Aantal toetsen:	3 toetsen
Type beeldsensor:	Laser
Temperatuur bij opslag:	-20 - 70 °C
Standaard interfaces:	RS-232, RS-485
Afmetingen (B x D x H):	215.5 x 170.5 x 126.5 mm
Bedrijfstemperatuur (T-T):	0 - 50 °C
Lichtbron:	630 - 680
Lees-snelheid (max):	1000 lezingen/s