Dahua Technology Lite HAC-HDW1400EM-A Handleiding

Dahua Technology Bewakingscamera Lite HAC-HDW1400EM-A

Lees hieronder de 📖 handleiding in het Nederlandse voor Dahua Technology Lite HAC-HDW1400EM-A (6 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

HDCVI Camera User s Manual ’

Version 0.11.

Welcome

Thank you for purchasing our HDCVI camera!

This user s manual is designed to be a reference tool for your system. ’

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user s manual well for future reference! ’

Important Safeguards and Warnings

Electrical safety

All installation and operation here should conform to your local electrical safety codes.

Please check if the power supply is correct before operating the device.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited

power source is rated 12V or AC24V in the IEC60950-1. (Power supply requirement is subject to DC

the device label).

Please install easy- -use device for power oﬀ before installing wiring, which is for emergent power oﬀ to

when necessary.

Please prevent the line cord from being trampled or pressed, especially the plug, power socket and the

junction from the device.

Note: Do not connect these two power supplying sources to the device at the same time; it may

result in device damage!

We assume no liability or responsibility for all the ﬁres or electrical shock caused by improper handling

or installation.

We are not liable for any problems caused by unauthorized modiﬁcation or attempted repair.

Environment

Please don t aim the device at strong light (such as lighting, sunlight and so on) to focus; otherwise it ’

may cause overexposure (It is not the device malfunction), which will aﬀect the longevity of CCD or

CMOS.

Please transport, use and store the device within the range of allowed humidity and temperature.

Please don t keep the device in a place which is wet, dusty, extremely hot, and extremely cold and with ’

strong electromagnetic radiation or unstable lighting.

Please do not allow water and other liquid falling into the camera in case that the internal components

are damaged.

Please do not allow rain or damp to the indoor device in case ﬁre or lightning may occur.

Please keep the sound ventilation in case of heat accumulation.

Please pack the device with standard factory packaging or material with same quality when transporting

the device.

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

Operation and Daily Maintenance

Please do not touch the heat dissipation component of the device directly in order to avoid scald.

Please do not dismantle the device; there is no component which can be ﬁxed by users themselves in

the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling.

iii

It is recommended to use the device with thunder proof device in order to improve thunder proof eﬀect.

The grounding holes of the product are recommended to be grounded to further enhance the reliability

of the camera.

Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust or

dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust gently if it is

necessary to clean.

Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent ﬁrst and then use it to clean the device. Finally use the dry cloth to clean the

device. Don t use volatile solvent like alcohol, benzene, thinner and etc. or strong detergent with ’

abrasiveness, otherwise it will damage the surface coating or reduce the working performance of the

device.

Dome cover is an optical device, please don’t touch or wipe cover surface directly during installation

and use, please refer to the following methods to deal with once dirt is found:

Stained with dirt

Use oil-free soft brush or hair dries to remove it gently.

Stained with grease or ﬁngerprint

Use soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth or paper

soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to change the cloth

and wipe several times if it is not clean enough.

Warning

Please use the standard accessories provided by manufacturer and make sure the device is installed

and ﬁxed by professional engineers.

Please prevent the device surface from the radiation of laser beam when using laser beam device.

Please do not provide two or more power supply modes for the device, otherwise it may cause damage

to the device.

Statement

Please refer to the actual product for more details; the manual is just for reference.

The manual will be regularly upgraded according to the product update; the upgraded content will be

added in the manual without prior announcement.

Please contact the supplier or customer service if there is any problem occurred when using the device.

Please contact the customer service for the latest procedure and supplementary documentation.

There may be deviation between the actual value of some data and the value provided in the manual

due to the reasons such as the real environment is not stable and so on. Please refer to the company’s

ﬁnal explanation if there is any doubt or dispute.

The company is not liable for any loss caused by the operation which is not followed by the manual.

Product specificaties

Merk:	Dahua Technology
Categorie:	Bewakingscamera
Model:	Lite HAC-HDW1400EM-A
Kleur van het product:	Wit
Gewicht:	420 g
Gewicht verpakking:	550 g
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP67
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Montagewijze:	Plafond/muur/paal
Ondersteunde video-modi:	720p, 1080p
Maximum resolutie:	- Pixels
Totaal aantal megapixels:	4.1 MP
Diameter:	106 mm
Type stroombron:	DC
Stroomuitvoer (volt):	12
Minimale belichting:	0.03 Lux
Field of view (FOV) hoek:	84.8 °
Aantal cameras:	1
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
Vaste focale lengte:	3.6 mm
Vermogensverbruik (max):	4.1 W
Certificering:	CE (EN55032, EN55024, EN50130-4)\nFCC (CFR 47 FCC Part 15 subpartB, ANSI C63.4-2014)\nUL (UL60950-1+CAN/CSA C22.2 No.60950-1)
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/3 "
Type beeldsensor:	CMOS
Witbalans:	Auto, Manual
Type camerasluiter:	Elektronisch
Ruisonderdrukking:	Ja
Lengte:	93.7 mm
Temperatuur bij opslag:	-40 - 60 °C
Maximaal 30 frames per seconde:	30 fps
Progressive scan:	Ja
Signaal/ruis-verhouding:	65 dB
Draaihoek:	360 °
Pan bereik:	0 - 360 °
Dag/nacht modus:	Ja
Aantal lenzen:	1
Maximum aperture number:	2
Aantal sensoren:	1
Nachtkijker afstand:	50 m
Aantal verlichtingen LEDS:	1
Achtergrondverlichting compensatie:	Ja
Aantal effectieve pixels (H x V):	2688 x 1520 Pixels
Highlight Compensation (HLC) (compensatie voor sterke belichting):	Ja
Wide Dynamic Range (WDR):	Ja
Bedrijfstemperatuur (T-T):	-40 - 60 °C
Bereik kantelhoek:	0 - 78 °
Digital Wide Dynamic Range (DWDR):	Nee
Smart IR:	Ja