Daewoo DSJ5510 Handleiding

Daewoo Televisie DSJ5510

Lees hieronder de đź“– handleiding in het Nederlandse voor Daewoo DSJ5510 (97 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/97
http : //svc.dwe.co.kr
Caution
: In this Manual, some parts can be changed for improving. their
performance without notice in the parts list. So, if you need the
latest parts information, please refer to PPL(Parts Price List)in
Service Information Center(http://svc.dwe.co.kr)
DAEWOO ELECTRONICS Corp.
Service Manual
Feb. 2004
S/M No. :DSJ112FEFO
REAR PROJECTION TV
CHASSIS : SJ-112
MODEL : DSJ-4710CRA/5510CRA
DSJ-4720CRA/5520CRA
Contents
1. Safety Instruction 3
2. Product Specification 4
3. Remote Control 5
4. Adjusting Method 6
5. Explanation for circuit operation 12
6. Trouble Shooting 34
7. Service Part list 43
8. Schematic Diagram
1) Block Diagram 76
2) Power 77
3) Rear IO 78
4) AV main 79
5) deflection 80
6) Convergence Amp & Sound Amp 81
7) Convergence Module 82
8) CRT Amp 83
9) Control & side 84
9. PRINTED CIRCUIT BOARD
1) Main PCB 85
2) Power PCB 86
3) AMP PCB 87
4) CRT PCB 88
5) DEF PCB 89
6) UNION-1 PCB(CONTROL, SIDE) 90
7) UNION-2 PCB(CONV MODULE, REAR IO 91
10. EXPLODED VIEW
1) DSJ-4710 92
2) DSJ-4720 93
3) DSJ-5510 94
4) DSJ-5520 95
1
2
1. Safety Instruction
1. When all services are carried out, every item required in this manual needs to be followed
and the services should be performed by A/S man.
2. The following general items should be performed before staring the services.
1) Unplug the power.
2) Uncover the cabinet.
3) To prevent a danger of shock, touch a terminal of plug on the chassis ground and discharge
a remaining voltage.
4) Check if all parts are in the proper places, omitted or burned.
5) Check the soldering state of all parts, if a clad copper is loose or peeled off and if there is a
short between clad coppers.
6) When all the articles mentioned above are normal, plug the power and refer to “Fault
diagnosis according to cause and symptom” of this manual for service according to screen
state.
3. Pay attention to a basic wiring and check a damaged part if a disconnected circuit is found
and replace it with a new one.
4. The equal rated parts should be used depending on the parts list of this manual when a part
needs to be replaced. Because some electronic parts and appliances have safety-related
features, an electric shock, file or X-RAY radiation can be caused if no equal rated parts are
used.
5. When a part needs to be replaced and soldered on PCB, the part should be inserted in the
right position and not contact with even a terminal of other part.
Especially, a high voltage resistance should be inserted with 10mm away from the PCB.
6. Since approx. 30KV high voltage is applied to the Braun tube in operating the TV set, a little
X-RAY can be radiated. If the voltage is too high, harmful X-RAY can result in a danger.
Therefore, A/S man with sufficient knowledge about high voltage needs to perform the
service. Especially, be sure to discharge the anode of the Braun tube on the chassis ground
of TV set before starting the repair.
7. Examine the followings before finishing the service.
1) Check if all protecting components have been assembled.
2) Keep the lead line away from high voltage or high temperature parts and check if all wires
have been connected.
3) Check a leakage current to protect a user from a shock.
Observances for safe service


Product specificaties

Merk: Daewoo
Categorie: Televisie
Model: DSJ5510

Heb je hulp nodig?

Als je hulp nodig hebt met Daewoo DSJ5510 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie Daewoo

Handleiding Televisie

Nieuwste handleidingen voor Televisie