D-Link DFM-562IS Handleiding

D-Link Router DFM-562IS

Lees hieronder de 📖 handleiding in het Nederlandse voor D-Link DFM-562IS (73 pagina's) in de categorie Router. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/73

D-Link DFM-562IS HSFi PCI Modem User’s Guide

D-

-L

M-

-5

User’s Guide

User’s Guide User’s Guide

D-Link DFM-562IS HSFi PCI Modem User’s Guide

FCC Requirements

This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a

label that contains, among other information, the FCC Registration Number and Ringer

Equivalence Number (REN) for this equipment. IF REQUESTED. THIS INFORMATION

MUST BE GIVEN TO THE TELEPHONE COMPANY.

The REN is useful to determine the quantity of

devices you may connect

to your telephone line

and still have these entire devices ring when your telephone number is called In most. But not

all areas the sum of the REN’s of all devices connected to one line should not exceed five (5.0).

To be certain of the number of devices you may connect to your line. As determined by the

REN. You should contact your local telephone company to determine the maximum REN of

the area you are calling from. If your telephone equipment causes harm to the telephone

network. The Telephone Company may discontinue your service temporally. If possible, they

will notify you in advance. But if the advanced notice is failed, you will be notified as soon as

possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may change in its facilities, equipment, operations or procedures that

could affect the proper functions of your equipment. If this occurs, you will be notified in

advance to give you an opportunity to maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact the following address

and phone number for information on obtaining service or repairs. The Telephone Company

may ask you to disconnect this equipment from the network until the problem is solved or until

that the equipment is not detected malfunctioning. This equipment may not be used on coin

service provided by the Telephone Company. Connection to party lines is subject to state

Tariffs.

Federal Communications Commission

Radio Frequency Interference Statement.

Note: This equipment has been tested and found to comply with the limitation for a lass B

digital device pursuant to Part 15 of the FCC Rules. These restrictions are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

residential installation. This equipment generates, uses, and can radiate radio frequency

energy and if not installed and used in accordance with the instruction manual may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If the equipment does cause harmful

interference to radio or television reception, which can be determine by tuning the equipment

off and on, the user is suggested to try to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the distance between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected. Consult the dealer or an experienced radio TV technician for help.

Notices:

(1) The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

(2) Shielded interface cables and AC power cord if any must be used in order to comply with

the emission limits.

Notices to Australian users:

The modem card must only be used in a data terminal equipment (DTE) e.g. computer, that has

a screw down cover (lid). As unsafe voltages (TNV) exist on the modem card, disconnect the

modem card from the telephone line while the cover (lid) of the DTE (computer) is removed.

Installation of the modem card in a DTE (computer) which does not require a tool to open the

cover (lid) will render the permit void.

Disconnect the telephone line before opening the cover (lid) of the DTE (computer). Do not

connect the customer equipment to the telephone line while the cover (lid) of the DTE

(computer) is open.

D-Link DFM-562IS HSFi PCI Modem User’s Guide

WARNING

ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS

MPLIA

E LABEL

WARNING

FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A

TELECOMMUNICATIOS COMPLIANCE LABEL. THIS INCLUDES

CUSTOMER EQUIPMENT PREVIOUSLY LABELLED

PERMITTED OR CERTIFIED.

Modems connected to the Australian telecommunications network must be marked in

accordance with the Labeling Notice. This modem has been specifically configured to ensure

compliance with the ACA Standards. Do not adjust your modem or software outside the

values indicated as below. To do so would result in your modem being operated in a

non-compliant manner.

Modem Commands:

Command Default Permissible Range

ATA - Do not use

ATB B0 Do not set to B1

AT&G &G0 &G2

AT&P &P0 &P1

ATSn see table below

S register Default Permissible Range

s6 2 2 to 6

Call Attempts/Retries:

Applications software shall be configured so that no more than 3 attempts are made to

establish a connection to a given number (Note: if the modem can detect service tones, up to

10 attempts can be made). If the call sequence is unsuccessful, there shall be a delay of at

least 30 minutes before attempting to call the number again.

Failure to set the modem and any application software used with the modem, to the values

shown as above will result in the modem being operated in a non-compliant manner.

Consequently, this would be in violation of the Labeling Notice for this equipment, and the

Telecommunications ACT 1997 prescribes penalties for the connection of non-compliant

equipment.

Product specificaties

Merk:	D-Link
Categorie:	Router
Model:	DFM-562IS
Gewicht:	46 g
Diepte:	120 mm
Hoogte:	50 mm
Interface:	PCI
Temperatuur bij opslag:	-10 - 70 °C
Intern:	Ja
Compatibele besturingssystemen:	Windows 98SE, Windows ME, Windows 2000, Windows XP
Veiligheid:	LVD (EC 60950)
Modemsnelheid:	56 Kbit/s
Modem (RJ-11) poort:	2
Datacompressie:	V.42bis & MNP 2-4
Bedrijfstemperatuur (T-T):	0 - 55 °C