D-Link DCS-6513 Handleiding

D-Link Bewakingscamera DCS-6513

Lees hieronder de 📖 handleiding in het Nederlandse voor D-Link DCS-6513 (75 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/75

User Manual

DCS-6513

Full HD WDR Day & Night Outdoor Dome Network Camera

Version 1.0 | 03/06/2013

2D-Link DCS-6513 User Manual

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or

organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and

change.

Manual Revisions

Revision Date Description

1.0 03/07/2013 DCS-6513 Revision A1 with rmware version 1.00

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other

countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.

Preface

3D-Link DCS-6513 User Manual

Table of Contents

Product Overview ......................................................................... 4

Package Contents ................................................................. 4

Introduction ............................................................................5

System Requirements ......................................................... 5

Features .................................................................................... 6

Hardware Overview ............................................................. 7

Front ...................................................................................... 7

Cable Harness..................................................................... 8

Internal ................................................................................. 9

Assembly and Installation .......................................................10

Concealed Cable Installation ......................................10

Exposed Cable Installation ..........................................12

Pendant Mount (Optional) ..........................................15

Bent Mount (Optional) ..................................................18

Installation of Weather Shield ........................................21

Adjusting the lens 3-axis angle ......................................25

Software Installation .........................................................26

D-ViewCam Setup Wizard ................................................29

Conguration ...............................................................................31

Using the Conguration Interface ................................31

Live Video ..............................................................................32

Setup .......................................................................................34

Setup Wizard ....................................................................34

Network Setup .................................................................40

Dynamic DNS ...................................................................43

Image Setup .....................................................................44

Audio and Video ..............................................................46

Lens Control ......................................................................48

Preset ...................................................................................49

Motion Detection ...........................................................51

Time and Date ..................................................................52

Event Setup .......................................................................53

SD Card ...............................................................................61

Advanced ...............................................................................62

Digital Input/Output ......................................................62

ICR and IR ...........................................................................63

HTTPS ..................................................................................64

Access List ..........................................................................65

Maintenance .........................................................................66

Device Management .....................................................66

System ................................................................................67

Firmware Upgrade ..........................................................68

Status ......................................................................................69

Device Info ........................................................................69

Logs .....................................................................................70

Help......................................................................................71

DI/DO Specications .................................................................72

Technical Specications ...........................................................73

5D-Link DCS-6513 User Manual

Section 1: Product Overview

Introduction

The DCS-6513 Full HD WDR Day & Night Outdoor Dome Network Camera is a professional, vandal-resistant surveillance and

security solution for small, medium, and large enterprises alike. The DCS-6513 uses a 3 megapixel progressive scan CMOS sensor;

which results in low noise and high sensitivity with Wide Dynamic Range (WRD) capabilities ideal for surveillance applications.

The DCS-6513 is equipped with a P-iris lens that controls the iris with extreme precision. The built-in stepping motor maintains

the iris opening at an optimal level at all times, resulting in superior image clarity, depth of eld, and image quality.

Together with WDR enhancement, users can identify image details in extreme bright, as well as dark environments.

The DCS-6513 has an IP67 certied weatherproof housing designed for both indoor and outdoor applications. The built-in

removable IR-cut lter and IR LEDs gives the DCS-6513 the capability to view up to 20M at night. The DCS-6513 also incorporates

Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power

cabling. The combination of IP67 housing, IR-Cut Filter, IR LEDs and PoE make the DCS-6513 an ideal solution for a high

performance, reliable and cost-eective 24 hour HD surveillance solution with an easy, clutter-free installation.

• Computer with Microsoft Windows 8, Windows® 7, Vista®, or XP (for CD-ROM Setup Wizard), Mac OS or Linux

• PC with 1.3GHz or above; at least 128MB RAM

• Internet Explorer 7 or above , Firefox 3.5 or above, Safari 4 and Chrome 8.0 or above

• Existing 10/100 Ethernet-based network

• An Micro SD memory card (optional) is required for recording to onboard storage. SDHC Class 6 or above is recommended.

• Broadband Internet connection

System Requirements

6D-Link DCS-6513 User Manual

Section 1: Product Overview

P-iris

The P-iris lens in the DCS-6513 solves the long-standing problem of capturing sharp images in varying light conditions. The DCS-6513 optimizes the

iris opening under all lighting conditions, resulting in images with better clarity, resolution and depth of eld as well as improved image sharpness

and increased image usability for network video surveillance.

Remote Zoom & Focus

The remote focus function eliminates the need for manual focusing at the camera position and allowing the user to make key adjustments from

any computer. The remote zoom functionality allows the user to make nal adjustments to the zoom from the computer. It provides a convenient

way to ensure that the viewing angle is optimized for the scene and required need for resolution.

Wide Dynamic Range

Wide Dynamic Range technology neutralizes imperfect lighting, providing clear images with the right amount of contrast even when a subject is

backlit

Automatic Thermostat Temperature Regulation

The DCS-6513 monitors and automatically regulates its temperature to ensure optimal performance even in extreme conditions. It balances fan use

against a built in heater based on a range of preset thermostatic settings. This gives the DCS-6513 the ability to perform in the most demanding

of environments.

Remote Monitoring Utility

The D-ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to congure and access

the Network Camera from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing

up to 32 cameras on one screen, and taking snapshots.

IR LED for Day and Night Functionality

The built-in infrared LEDs enables night time viewing of up to 20 meters (65.6 feet).

Robust Weatherproof and Vandal-resistant Housing

The DCS-6513 housing is compliant with both the IP67 weatherproof and IK-10 vandal-resistant certications, allowing you to rest assured that it

will continue to provide round-the-clock surveillance in the toughest of conditions and locations.

PoE (Power over Ethernet) for Flexible Installation

The DCS-6513 can draw all the power it needs from a PoE switch or PoE injector, negating the need for a separate power installation.

Features

7D-Link DCS-6513 User Manual

Section 1: Product Overview

1 Camera Lens Vari-focal lens to record video of the surrounding area

2 Light Sensor The light sensor measures the lighting conditions and switches between color

and infrared accordingly

3 IR LEDs Infrared LEDs illuminate the camera's eld of view at night

4 Power/Status LED Indicates the camera's current status

5 Protective Casing The camera is housed in an IP67 certied weatherproof casing, which protects

it against rain and dust. This case is also IK-10 certied vandal-resistant.

Front

Hardware Overview

8D-Link DCS-6513 User Manual

Section 1: Product Overview

Cable Harness

1 BNC Connector The BNC connector is recommended for use with handheld monitors to

check the Field of View during installation.

2 Power Connector Power connector for the provided 12V DC power adapter.

3 Audio In (A.In) Connects to a microphone.

4 Audio Out (A.Out) Connects to a speaker.

5 DI/DO Connector I/O connectors for external devices. 12V DC output.

6 Reset Button Press and hold the recessed button for 10 seconds to reset the camera.

7 24 V Power Connector Connects to 24 V AC power supply.

9D-Link DCS-6513 User Manual

Section 1: Product Overview

Internal

1 Micro SD Card Slot Insert an Micro SD card for local storage of recorded image and video

Disassemble the Camera

Open the camera enclosure

by loosen the 4 screws. Lift

the dome o the base of the

camera.

Install the Micro SD Card

Push the Micro SD card into the

camera with the gold contacts

oriented towards the base of the

camera. To eject the Micro SD card,

push the Micro SD card into the slot.

10D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Assembly and Installation

Standard Mounting Instructions

Height: 23 mm (0.9 inches)

Diameter: 183 mm (7.2 inches)

Weight: 400 g (0.9 lbs)

Concealed Cable Installation

1. Disassemble the camera enclosure (see page 9).

2. Thread the cables through the waterproof plugs at the bottom of the base of the camera.

Attach the cables to the corresponding cable connectors.

3. Locate a suitable position on the ceiling for the mounting plate to be installed.

4. Use the mounting template to mark the holes for installation.

5. Cut an access hole in the ceiling for the cables.

6. Drill four separate 6mm holes corresponding to the holes in the mounting template and insert

the plastic anchors into these holes.

7. Attach the surface bracket to the ceiling using the screws provided

11D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

1. Connect the Ethernet cable and the power cable, threading them through the hole in the ceiling.

2. Push the dome body up over the base of the camera.

3. Attach the dome to the base of the camera using the three long screws and the provided security screw.

12D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Exposed Cable Installation

Height: 23 mm (0.9 inches)

Diameter: 183 mm (7.2 inches)

Weight: 400 g (0.9 lbs)

1. Disassemble the camera enclosure (see page 9).

2. Remove the small screw to release the faceplate on the side of the base of the camera

13D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

1. Attach the dual-holed plate to the base of the camera

2. Thread the cables through the waterproof plugs on the side of the base of the camera. Attach the cables to the corresponding cable

connectors.

3. Place the plastic cable cover onto the dual-holed plate and attach it using the screw.

14D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

1. Locate a suitable position on the ceiling for the mounting plate to be installed.

2. Use the mounting template to mark the holes for installation.

3. Drill four separate 6mm holes corresponding to the holes in the mounting template and insert the plastic anchors into these holes.

4. Attach the surface bracket to the ceiling using the screws provided.

5. Place the dome body onto the base of the camera.

6. Attach the dome to the base of the camera using the three long screws and the provided security screw.

15D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Pendant Mount (Optional)

Height: 201 mm (7.9 inches)

Diameter: 150 mm (5.9 inches)



Weight: 665 g (1.45 lbs)

Pendant

Bracket

Cap

Rubber

Seal

Bracket

Cap

Mounting

Plate

1. Attach the mounting plate to the bracket cap using the three screws.

2. Locate a suitable position on the ceiling for a 34mm (+2 / –0 mm) hole to be cut. A

template is included to aid in marking the mounting hole.

3. Cut a hole in the ceiling according to the template.

4. Drill four separate 6mm holes corresponding to the holes in the mounting template

and insert the plastic anchors into these holes.

5. Place the rubber seal between the pendant bracket and the ceiling to ensure a

waterproof seal between the ceiling and the bracket.

6. Attach the pendant bracket to the ceiling using the screws provided.

7. Attach the bracket cap to the bottom of the pendant bracket by rotating the cap

counterclockwise to tighten it into place.

8. Insert the screw into the base of the pendant bracket at the top of the bracket cap

to secure the bracket cap into place.

16D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

1. Connect the Ethernet cable and the power cable, then thread them through the pendant bracket.

2. Place the dome body onto the base of the camera.

17D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

1. Attach the dome to the base of the camera using the three long screws and the provided security screw.

18D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Height: 253 mm (9.96 inches)

Diameter: 150 mm (5.9 inches)

Weight: 770 g (1.7 lbs)

Bent Mount (Optional)

Bracket Cap

Bent

Bracket

Cap

Mounting

Plate

1. Attach the mounting plate to the bracket cap using the three screws.

2. Locate a suitable position on the wall for a 34mm (+2 / –0 mm) hole to be cut. A

template is included to aid in marking the mounting hole.

3. Cut a hole in the ceiling according to the template

4. Drill four separate 6mm holes corresponding to the holes in the mounting template

and insert the plastic anchors into these holes.

5. Place the rubber seal between the wall mount bracket and the wall to ensure a

waterproof seal between the wall and the bracket.

6. Attach the wall mount bracket to the wall using the screws provided.

7. Attach the bracket cap to the bottom of the wall mount bracket by rotating the cap

counterclockwise to tighten it into place.

8. Insert the screw into the base of the wall mount bracket at the top of the bracket

cap to secure the bracket cap into place.

9. Connect the Ethernet cable and the power cable and thread them through the wall

mount bracket.

19D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Dome

Camera

Bent

Bracket

1. Place the dome body onto the base of the camera.

21D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

The DCS-6513 comes with an optional weather shield to protect your network camera against damage from adverse weather. If you are

installing the DCS-6513 in a location where it will be exposed to harsh weather, it is recommended that you install the weather shield.

The weather shield should be installed before you commence mounting or connecting the camera in its nal location. To install the weather

shield, you will require the 37mm screws which were included in the product package.

Step 1: Using a screwdriver, remove the existing two screws which were pre-installed in the collar of the camera

Step 2: Place the weather shield over the dome of the camera and align the screw holes with the holes in the collar of the camera

Step 3: Install the 37mm screws into the existing screw holes so that they hold the weather shield in place

Installation of Weather Shield

Weather Shield

Install 37mm Screws

Remove Existing Screws

22D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

General Connection Using 12 V DC Power Adapter

1. Connect the network camera to a hub via an Ethernet cable.

2. Connect the supplied power cable from the camera to a power outlet.

23D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

General Connection Using 24 V AC Power Wiring

1. Connect the network camera to a hub via an Ethernet cable.

2. Connect the supplied power cable from the camera to a power source.

24D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Connection with a PoE Hub

1. If you are using a PoE hub, connect the IP camera to the hub via an Ethernet cable, which will provide

transmission of both power and data over a single cable.

25D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Adjust the Viewing Angle of the 3-axis

Mechanism

Turn the lens module left and right until the desired

position is achieved. Tighten the pan screw once

completed.

Loosen the tilt screws on both sides of the camera,

and turn the lens module up and down until the

desired position is achieved; tighten the tilt screws

once completed.

Turn the lens to adjust the IP camera’s image until the

desired orientation is achieved, tighten the image

adjustment screw once completed.

Adjusting the lens 3-axis angle

26D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Step 1

Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program.

The CD-ROM will open the Camera Installation Wizard. The Setup Wizard will guide you through

the installation process through to conguring your camera.

Note:

If the autorun program does not automatically start on your computer, go to Windows, click

Start Run D:\DCS6513.exe> . In the Run command box type , where D: represents your CD-

ROM drive.

Step 2

Accept the End User Licence Agreement and follow the on screen prompts to install the Camera

Installation Wizard.

Step 3

Select your camera from the list, then click Wizard. If you have multiple cameras, you can

identify them by the MAC ID printed on the label on the back of your camera.

Software Installation

27D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Step 4

By default the is "admin" and the password eld is left blank.Admin ID

It is recommended that you create and conrm a password for your device.

Click to continue.Next

Step 5

Select Static IP if your Internet Service Provider has provided you with connection

settings, or if you wish to set a static address within your home network. Enter

the correct conguration information and click to continue. Next

Note: Select DHCP if you are unsure of which settings to choose.

Click to continue.Next

28D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Step 6

Conrm your camera login details and IP address details and click .Restart

The LED on the front of the DCS-6513 will blink, then turn solid green once it

successfully connects to your network..

Step 7

Your DCS-6513 camera is now set up, Click Exit to exit the wizard and can skip to

"Conguration" on page 31 for advanced conguration of your camera.

29D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the

software to congure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP

surveillance.

Step 1

Insert the CD-ROM into the CD-ROM drive. Click "Install D-ViewCam Software"

from menu, and select "D-ViewCam" to install the VMS software.

Step 2

Follow the Installation Wizard to install D-ViewCam.

D-ViewCam Setup Wizard

30D-Link DCS-6513 User Manual

Section 2: Assembly and Installation

Step 3

Click Finish to complete the installation.

Step 4

To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam >

Main Console.

Step 5

For more detailed operation of using D-ViewCam software, please refer to the

D-ViewCam Manual.

31D-Link DCS-6513 User Manual

Section 3: Conguration

Conguration

Using the Conguration Interface

After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web conguration

utility is designed to allow you to easily access and congure your DCS-6513. At the end of the wizard, click Link, or enter the

IP address of your camera into a web browser, such as Mozilla Firefox. To log in, use the User name and the password admin

you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your

password, click .OK

Step 1

Click the button on the Wizard.Link

The Setup Wizard will automatically open your web browser to the IP address of

the camera.

Step 2

Enter your credentials to access the conguration interface.

32D-Link DCS-6513 User Manual

Section 3: Conguration

Live Video

This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your

language using the drop-down menu on the left side of the screen.

You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.

Digital Input

Indicator

This indicator will change color when a digital input signal is

detected.

Motion Trigger

Indicator

This indicator will change color when a trigger event occurs.

Note: The video motion feature for your camera must be

enabled.

Recording

Indicator

When a recording is in progress, this indicator will change

color.

Control Pad

This control pad can be used to electronically pan, tilt, and

zoom (ePTZ) within the camera's predened view area, if one

has been dened.

Auto Pan Starts the automatic panning function. The ROI will pan from

back and forth within the FOV

Stop Stops the camera ePTZ motion

Preset Path Starts the camera's motion along the predened path

You may select a value between 0 and 10. 0, where 1 is the slowest and

10 is the fastest.

ePTZ Speed:

This option displays the status of the SD card. If no SD card has been

inserted, this screen will display the message "Card Invalid."

This option displays the status of your I/O device if a device has been

connected.

SD Status:

IO Status:

33D-Link DCS-6513 User Manual

Section 3: Conguration

If any presets have been dened, selecting a preset from this list will

display it.

Go To:

(Preset List)

Video Prole 1

Video Prole 2

Video Prole 3

Full screen mode

Take a Snapshot

Record a Video Clip

Set a Storage Folder

Listen/Stop Audio In (from microphone)

Start/Stop Audio Out (to speaker)

Start/Stop Digital Output

This window indicates the total Field of View (FOV) of the camera. The

red box indicates the visible Region of Interest (ROI).

You may select the interface language using this menu.

Global View:

Language:

34D-Link DCS-6513 User Manual

Section 3: Conguration

Setup

Setup Wizard

To congure your Network Camera, click Internet Connection Setup Wizard. Alternatively,

you may click to manually congure your Network Manual Internet Connection Setup

Camera and skip to "Network Setup" on page 40.

To quickly congure your Network Camera’s motion detection settings, click Motion

Detection Setup Wizard. If you want to enter your settings without running the wizard, click

Manual Motion Detection Setup and skip to"Motion Detection" on page 51.

Product specificaties

Merk:	D-Link
Categorie:	Bewakingscamera
Model:	DCS-6513
Kleur van het product:	Wit
Gewicht:	1530 g
Breedte:	151.79 mm
Diepte:	127 mm
Hoogte:	191.8 mm
Soort:	IP-beveiligingscamera
Internationale veiligheidscode (IP):	IP67
Vormfactor:	Dome
Ondersteuning voor plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Maximum resolutie:	2048 x 1536 Pixels
Totaal aantal megapixels:	3 MP
Type stroombron:	Power over Ethernet (PoE)
Stroomuitvoer (volt):	+12V
Stroomuitvoer (ampère):	1.25 A
Minimale belichting:	0.5 Lux
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
LED-type:	IR
HTTPS-encryptie:	Ja
Microfoon, line-in ingang:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Brandpuntbereik:	3 - 9 mm
Certificering:	CE\nCE LVD\nFCC\nC-Tick
Omvang optische sensor:	1/2.8 "
Type beeldsensor:	CMOS
Digitale zoom:	10 x
Optische zoom:	- x
Interface:	RJ-45
Ondersteunde grafische resoluties:	176 x 144,320 x 240,480 x 360,1024 x 768 (XGA),1280 x 720 (HD 720),1600 x 1200 (UXGA),1920 x 1080 (HD 1080),2048 x 1536 (QXGA),640 x 480 (VGA),800 x 600 (SVGA)
Bekabelingstechnologie:	10/100Base-T(X)
Temperatuur bij opslag:	-20 - 70 °C
Maximaal 30 frames per seconde:	30 fps
Ondersteunde netwerkprotocollen:	IPv6, HTTP / HTTPS, IPv4, Samba, TCP/IP, PPPoE, UDP, ICMP, RTP / RTSP/ RTCP, DHCP client, NTP client (D-Link), DNS, DDNS client (D-Link), SMTP, IGMP, FTP, ONVIF
Luchtvochtigheid bij opslag:	5 - 95 procent
IP-adresfilter:	Ja
Power over Ethernet (PoE):	Ja
Scherpstellen:	1.2
Dag/nacht modus:	Ja
Bewegingssensor:	Ja
Nachtkijker afstand:	20 m
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	10.5 W
Bedrijfstemperatuur (T-T):	-40 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Kijkhoek lens, horizontaal:	96.4 °
Kijkhoek lens, verticaal:	51.2 °