Cotech TD9511-3 Handleiding

Cotech Niet gecategoriseerd TD9511-3

Lees hieronder de 📖 handleiding in het Nederlandse voor Cotech TD9511-3 (44 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/44
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
LĂ€s hela bruksanvisningen noggrant och
försÀkra dig om att du har förstÄtt den
innan du anvÀnder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nĂžye og forsikre deg om
at du forstÄr dem, fÞr du tar produktet i bruk.
Ta vare pÄ anvisningene for seinere bruk.
TÀrkeÀÀ tietoa:
Lue nÀmÀ ohjeet huolellisesti ja varmista
ettÀ olet ymmÀrtÀnyt ne, ennen kuin alat
kÀyttÀÀ laitetta. SÀilytÀ ohjeet myöhempÀÀ
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
ENGLISHSVENSKANOR SKSUOMIDEUTSCH
Multiverktyg
MultiverktĂžy
Monitoimityökalu
Multiwerkzeug
Art.no Model
18-3555 TD9511-3-UK
40-8765 TD9511-3
Multi-Tool
Ver. 20150916
Original instructions
Bruksanvisning i original
Original bruksanvisning
AlkuperÀinen kÀyttöohje
Original Bedienungsanleitung
2
ENGLISH
Multi-Tool
Art.no 18-3555 Model TD9511-3-UK
40-8765 TD9511-3
Please read theentire instruction manual before using theproduct and then save it for
future reference. We cannot be held responsible for any text or picture errors or changes
to technical data. If you experience any technical problems or have any other questions,
please contact our Customer Services (for address details, please see back page).
Safety
General safety instructions for power tools
Warning! Read all theinstructions.
Failure to adhere to thefollowing instructions may lead to electric shocks, ïŹres and/or
serious injury. The term “power tools” in thewarning text below refers to your handheld
mains operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Cluttered and poorly lit areas Keep thework area clean and well illuminated.
invite accidents.
b) Do not use power tools in explosive environments, e.g. near to ïŹ‚ammable liquids,
gases or dust. Power tools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders away from thearea where you are using
thepower tool. Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) The power tool’s plug must ïŹt correctly into thewall socket. Never modify
theplug in any way. Never use anadaptor together with earthed power tools.
UnmodiïŹed plugs and suitable wall sockets minimize therisk of electric shocks.
b) Avoid physical contact with earthed objects such as pipes, radiators, ovens
and refrigerators. There is anincreased risk of receiving anelectrical shock if your
body is earthed.
c) If water gets Do not expose thepower tool to rain or other wet conditions.
inside it increases therisk of electric shock.
d) Do not abuse themains lead. Never use thelead to carry thetool or pull
theplug from awall socket. Keep thelead away from heat, oil, sharp edges
and moving parts. Damaged or tangled leads increase therisk of electric shock.
e) When using power tools outdoors, use anextension lead that is suitable for
this purpose. The use of anextension lead designed for outdoor use decreases
therisk of electric shocks.
f) If theuse of thepower tool in awet environment is unavoidable, awall
socket equipped with aresidual current device (RCD) should be used.
Using anRCD signiïŹcantly reduces thechances of you receiving anelectric shock.
3
ENGLISH
3) Personal safety
a) Pay attention to what you are doing and use common sense when using
power tools. Never use power tools if you are tired or under theinïŹ‚uence of
drugs, alcohol or medication. One moment of inattention while using apower
tool may result in aserious injury.
b) Wear protective clothing. Always wear safety glasses. Using protective
clothing such as dust masks, non-slip safety shoes, helmets and ear defenders
decreases therisk of injury.
c) Avoid accidental starts. Make sure that thepower switch is set to OFF before
plugging thepower tool into awall socket, ïŹtting thebattery or picking up/
carrying thepower tool. Carrying apower tool with your ïŹnger on thepower
switch/trigger or connecting thepower tool to awall socket when the power
switch is set to ON is inviting anaccident.
d) A service Remove all service tools/keys before switching on thepower tool.
tool left on any moving part of thepower tool may result in injury.
e) Do not overreach. Make sure you stand steady and well balanced at all times.
This ensures better control over thepower tool in unexpected situations.
f) Wear suitable clothing. Do not wear loose-ïŹtting clothing or jewellery.
Keep hair, clothes and gloves away from moving parts. Loose-ïŹtting clothes,
jewellery or long hair could become caught in moving parts.
g) If equipment for dust extraction or collecting is available make sure it is connected
and used properly. Using technical aids may decrease dust related hazards.
4) Use and maintenance of the power tool
a) Do not force thepower tool. Use apower tool suitable for thework you are
about to perform. The proper power tool will perform thetask better and safer if
used at thecorrect feed rate.
b) Never use thepower tool if thepower switch does not switch thetool on and
off properly. All power tools that cannot be controlled by thepower switch are
dangerous and must be repaired.
c) Unplug thelead from thewall socket or remove thebattery before making
any adjustments, changing accessories or storing thepower tool.
These precautions reduce therisk of thepower tool starting unexpectedly.
d) Store power tools that are not being used out of children’s reach. Do not allow
people who are unfamiliar with thetool or its functions to operate thetool.
Power tools can be dangerous if they fall into thehands of inexperienced users.
e) Maintaining power tools. Check for any incorrect settings, parts that catch,
broken parts or anything else which may cause thepower tool to malfunction.
If something is damaged it must be repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Properly maintained cutting tools with sharp Keep cutting tools sharp and clean.
blades are less likely to jam and are easier to control.
g) Use thepower tool, and any accessories in accordance with these instructions,
take into consideration theworking conditions and thework that is to be
performed.Using thepower tool for apurpose other than that for which it is
intended could result in adangerous situation.

Product specificaties

Merk: Cotech
Categorie: Niet gecategoriseerd
Model: TD9511-3

Heb je hulp nodig?

Als je hulp nodig hebt met Cotech TD9511-3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Cotech

Cotech

Cotech J5218D Handleiding

21 November 2023
Cotech

Cotech 50053 Handleiding

21 November 2023
Cotech

Cotech 51097X23 Handleiding

21 November 2023
Cotech

Cotech HT8750-EUCLA Handleiding

21 November 2023
Cotech

Cotech 36-6286 Handleiding

21 November 2023
Cotech

Cotech PTC17 Handleiding

3 Juni 2023
Cotech

Cotech EMT306CD Handleiding

28 Mei 2023
Cotech

Cotech S1J-XT3-10 Handleiding

22 Mei 2023
Cotech

Cotech SPH01-10E Handleiding

19 Mei 2023
Cotech

Cotech RDC100J Handleiding

18 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec

Vitec MGW Diamond-HX OG Handleiding

23 November 2024
Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024