Cotech S1J-AJ8-10 Handleiding

Cotech Niet gecategoriseerd S1J-AJ8-10

Lees hieronder de đź“– handleiding in het Nederlandse voor Cotech S1J-AJ8-10 (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Gravyrpenna
Graverpenn
Kaiverruskynä
Art.no Model
18-3028 S1J-AJ8-10-UK
30-9128 S1J-AJ8-10
ENGLISHSVENSKANORSKSUOMI
Engraving Tool
Ver. 200802
2
ENGLISH
Engraving Tool
Art.no: 18-3028 Model: S1J-AJ8-10-UK
30-9128 S1J-AJ8-10
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photographic errors and any changes in technical
data. If you have any questions concerning technical problems please contact our
Customer Service Department (see address on reverse.)
Safety Warnings Common for grinding,
sanding, wire brushing, polishing or abrasive
cutting-off operations
a) This power tool is intended to function as a grinder, sander, wire brush
or cut-off tool. Read all safety warnings, instructions, illustrations
and speciî› cations provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, î› re and/or serious injury.
b) Operations such as polishing are not recommended to be performed with
this power tool. Operations for which the power tool was not designed may
create a hazard and cause personal injury.
c) Do not use accessories which are not speciî› cally designed and
recommended by the tool manufacturer. Just because the accessory can
be attached to your power tool, it does not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum
speed marked on the power tool. accessories running faster than their rated
speed can break and y apart.
e) The outside diameter and the thickness of your accessory must be within
the capacity rating of your power tool. Incorrectly sized accessories cannot
be adequately guarded or controlled.
f) The arbour size of wheels, anges, backing pads or any other accessory
must properly î› t the spindle of the power tool. Accessories with arbour
holes that do not match the mounting hardware of the power tool will run out of
balance, vibrate excessively and may cause loss of control.
g) Do not use a damaged accessory. Before each use inspect the accessory
such as abrasive wheels for chips and cracks, backing pad for cracks,
tear or excess wear, wire brush for loose or cracked wires. If the power
tool or accessory is dropped, inspect for damage or install an undamaged
accessory. After inspecting and installing an accessory, position yourself and
bystanders away from the plane of the rotating accessory and run the power
3
ENGLISH
tool at maximum no-load speed for one minute. Damaged accessories will
normally break apart during this test time.
h) Wear personal protective equipment. Depending on application, use face
shield, safety goggles or safety glasses. As appropriate, wear dust mask,
hearing protectors, gloves and workshop apron capable of stopping
small abrasive or workpiece fragments. The eye protection must be capable
of stopping ying debris generated by various operations . The dust mask or
respirator must be capable of î› ltrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from work area. Anyone entering
the work area must wear personal protective equipment. Fragments of
workpiece or of a broken accessory may y away and cause injury beyond the
immediate area of operation.
j) Hold power tool by insulated gripping surfaces only, when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and shock the operator.
k) Position the cord clear of the spinning accessory. If you lose control, the
cord may be cut or snagged and your hand or arm may be pulled into the
spinning accessory.
l) Never lay the power tool down until the accessory has come to a
complete stop. The spinning accessory may grab the surface and pull the
power tool out of your control.
m) Do not run the power tool while carrying it at your side. Accidental contact
with the spinning accessory could snag your clothing, pulling the accessory
into your body.
n) Regularly clean the power tool’s air vents. The motor’s fan will draw the
dust inside the housing and excessive accumulation of powdered metal may
cause electrical hazards.
o) Do not operate the power tool near ammable materials.
Sparks could
ignite these materials.
p) Do not use accessories that require liquid coolants. Using water or other
liquid coolants may result in electrocution or shock.

Product specificaties

Merk: Cotech
Categorie: Niet gecategoriseerd
Model: S1J-AJ8-10

Heb je hulp nodig?

Als je hulp nodig hebt met Cotech S1J-AJ8-10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Cotech

Cotech

Cotech J5218D Handleiding

21 November 2023
Cotech

Cotech 50053 Handleiding

21 November 2023
Cotech

Cotech 51097X23 Handleiding

21 November 2023
Cotech

Cotech HT8750-EUCLA Handleiding

21 November 2023
Cotech

Cotech 36-6286 Handleiding

21 November 2023
Cotech

Cotech PTC17 Handleiding

3 Juni 2023
Cotech

Cotech EMT306CD Handleiding

28 Mei 2023
Cotech

Cotech S1J-XT3-10 Handleiding

22 Mei 2023
Cotech

Cotech SPH01-10E Handleiding

19 Mei 2023
Cotech

Cotech RDC100J Handleiding

18 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024