Conair WW934ZF Handleiding

Conair Niet gecategoriseerd WW934ZF

Lees hieronder de 📖 handleiding in het Nederlandse voor Conair WW934ZF (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
Congratulations on purchasing the
Bluetooth®-enabled Heart Rate Scale from
WW Scales by Conair™.
This scale is designed to work with the free WW Scales by Conair™
app to give you an easy-to-use way of tracking your measurements. To
download the app, go to the Apple® App Store or Google® Play Store
and type “WW Scales by Conair” into the search box. Or, you can go to
www.BTScalesByConair.com and download the app there.
Once you have downloaded the app to your device, it will walk you through the
easy pairing and setup process with the scale. For more information, frequently
asked questions and support, check www.BTScalesByConair.com
Did you know?
• Your scale works as a body analysis monitor even without the app – you do not
need a smart device to check your weight, heart rate, body fat, body water, bone
mass, muscle mass or BMI!
• But you will need a smart device to set goals, track your progress, earn badges,
and participate in other fun activities that are only available on the app.
• If you ar e a WW member, your weight data will automatically sync with your account
on the WW app; no more need for manual data entries! Make sure you use the
same username and password for both apps, so your weight data can sync!
• If you use other health and fitness apps, and would like them to receive data from
your scale, the app will sync data to the Health app (Apple) and to the Google Fit
app (Android) and allow your favorite apps to pull your data from there.
For more information on setting up the app, pairing the scale, and the
features of the app, go to www.BTScalesByConair.com
For information on the scale, on how to set yourself up as a user without the app,
and about what your body analysis readings mean, please read this instruction
booklet.
Syncing Bluetooth
This is a Bluetooth-enabled scale. It will try to broadcast a Bluetooth signal every
time it is being used, even if you are not using it with the app, or your smart device
is out of range. Generally, you will see the following in the scale display:
Bluetooth symbol blinking: Scale is trying to communicate with your
smart device.
Bluetooth symbol stable: Bluetooth connection has been established.
Bluetooth symbol keeps blinking until the scale turns off: Pairing
failed, no Bluetooth connection, no data is being transmitted.
If a Bluetooth connection cannot be established, the scale will still
measure and display all your data, as long as you are set up as a user on
the scale (read “Personal Data Setting Mode” in this manual).
too lower normal higher too
Before Using Scale
Precautions for Use
CAUTION! Use of this device by persons with any electrical implant, such
as a heart pacemaker, or by pregnant women is not recommended.
The data generated by this scale is not intended as a substitute for professional
medical advice, diagnosis or treatment. To thoroughly understand the data and
how they fit into your personal medical profile, discuss with your doctor. The heart
rate monitoring device feature is not meant to detect irregular heart rhythms or
heart conditions. If you think you may have a medical condition or emergency,
immediately call your doctor or 911.
To get started:
1. Remove all packaging materials.
2. The scale is factory set to measure weight in pounds. To switch between
pounds (lbs) and kilograms (kgs), press the platform with one of your feet to
activate the scale. Take your foot off before the scale reads your weight. The
display will show "0.0". Now press the lb/kg switch in the back of the scale to
switch units.
3. Remove the isolator tab from the battery compartment – without opening the
battery cover at the bottom of the scale, gently pull out the isolator tab. (If the
tab cannot be pulled out, or if the scale display does not work after you have
pulled the isolator tab, remove the cover. Gently pull out the isolator tab or any
pieces of it that may be blocking the battery contacts. Ensure the batteries are
installed correctly. Replace the battery cover.)
4. For best accuracy, place scale on tile or hardwood floor, rather than uneven,
flexible or soft flooring (such as carpet).
Weight Measurement Only
(Using Scale Without App)
The scale is factory set to measure weight in pounds. To switch between pounds (lbs)
and kilograms (kgs), press the platform with one of your feet to activate the scale. Take
your foot off before the scale reads your weight. The display will show "0.0". Now press
the lb/kg switch in the back of the scale to switch units.
1. Step on the scale and stand still. "000" will flash for about
2 seconds, then your weight will display.
2. Next, you will see "oooo" run across the screen and then
your heart rate will display.
NOTE: If your feet are not properly aligned on the electrodes
(not fully on the metal disks), or the soles of your feet are
too dry, heart rate will not display and you will instead see
your weight. In that case, adjust the position of your feet to
better cover the metal discs and moisten the soles of your
feet with a little water or lotion, being careful not to slip on
the glass when you step on the scale again.
3. Step off the scale and it will shut off automatically.
Heart Rate Measurements
The body analysis generated by this scale is not intended as a substitute for
professional medical advice, diagnosis or treatment. To thoroughly understand the
data and how it fits into your personal medical profile, discuss with your doctor. The
heart rate monitoring device feature is not meant to detect irregular heart rhythms
or heart conditions. If you think you may have a medical condition or emergency,
immediately call your doctor or 911.
This scale is not suited for taking heart rate measurements during or immediately
after exercise. Take heart rate measurements in a rested state.
Your heart rate can fluctuate significantly from one moment to the next. If a heart
rate measurement seems unusually high or low to you, we suggest to taking the
average of three measurements. If you are concerned about your heart rate, please
immediately call your doctor or 911.
Personal Data Setting Mode
(Using Scale Without App)
Press the platform with one of your feet to activate the scale. Take your foot off before
the scale reads your weight. The display will show "0.0", then "000" and finally "0.0"
again. Wait for “0.0” to show, then press the SET button to enter into Personal Data
setting mode.
User 2 (P-02) will flash. Press the UP or DOWN button to
choose user number (user 2 to user 10). Press the SET button
to confirm.
The scale will now enter the Height setting mode.
Height will flash. Press the UP or DOWN button to choose
height. If the scale is set to measure in pounds, the height
will display in feet and inches. If it is set to measure in kg,
the height will display in cm. Pressing and holding the UP or
DOWN button will advance numbers quickly. Press the SET
button to confirm Height.
The scale will automatically switch to Age setting mode.
Age will flash. Press the UP or DOWN button to choose age
(10 to 100). Pressing and holding the UP or DOWN button will
advance numbers quickly. Press the SET button to confirm Age.
The scale will now enter the Gender setting mode.
Default icon will flash. Press the UP or DOWN button to
choose between female and male. Press SET button to
confirm selection. The scale will display the user data for a few
seconds and then will enter into body analysis mode and “0.0”
will appear on the display.
Note 1: If you need to edit any of your personal data, you can do so while the
data is being displayed. Simply press the SET button and scale will go back to the
Personal Data setting mode again. Follow the instructions above.
Note 2: In the Personal Data setting mode, the scale will return to standby mode
automatically if no button is pressed within 15 seconds, and already entered data
will not be saved. If that happens, simply repeat the Personal Data setting process
described above.
Body Analysis Measurement
(Using Scale Without App)
Operate the scale on a secure, flat floor. Step on the scale with one of your feet to
activate the display. Take your foot off before the weight is read. Wait until you see
“0.00” in kg mode or “0.0” in lb mode, then press the UP or DOWN button to select
your user number. Your data (height, age, gender) will quickly display.
Once the LCD shows “0.0,” you can step on the scale. Step on barefoot with your
feet aligned on the electrodes (metal disks) on the two sides of the platform. If your
feet are not bare, the scale will not be able to take measurements and you will get an
error reading.
After a few seconds, the LCD will show your body weight, then your heart rate, body
fat percentage, body water percentage, muscle mass, bone mass and body mass
index (BMI) for several seconds, and then turn off automatically.
If you get an error reading, make sure you are stepping on
the scale in bare feet (no socks or pantyhose) and your feet
are aligned on the metal disks. If you still get an error reading,
your skin may be too dry. Try rubbing a bit of lotion on the
soles of your feet and make sure not to slip on the platform of
the scale.
NOTE:
Your scale will also show an error reading if your weight is below or above the
specifications for the scale.
Low battery warning: When the batteries are critically low,
the scale display will show “Lo,” indicating it is time to replace
the batteries (see battery replacement instructions
in "Facts You Should Know").
NOTE:
If you step on the scale before “0.0” appears or if your
feet are not aligned on the electrodes, the scale will not
function properly.
NOTE:
To RESET your scale, press and hold the unit switch button
underneath the scale and press the SET button twice in short
succession. Then press and hold the SET button for about 3
seconds to reset the scale to factory default settings. Display
will show "CLr."
Weight and Body Fat
How does it work?
While body fat can be measured in many ways, the method used with this scale is
bioelectrical impedance. This indirect method of determining body fat starts when
a safe and very low electrical current is sent through the lower half of the body. The
electrical current flows more quickly through water and muscle than it will through
bone and fat. The scale measures the speed of the current. Based on this number,
the scale estimates body fat using a multistep mathematical formula.
Is it accurate?
Measurements of body fat tend to fluctuate a lot more than simple weight
measurements, and different methods of estimating body fat yield very different
results. Just as different scales give different results, different body fat analyzers can
provide very different body fat estimates. Even with the same scale the numbers will
vary because:
• Weight loss tends to produce substantial, continuous, and unpredictable changes
in body water content. Because body fat analysis is determined by water content in
the body, results can vary considerably from day to day.
• Hydration status affects body fat results. If you’ve just worked out, there is less
water for the electrical current to flow through. This may result in a higher body fat
result. In the same way, if you measure your body fat after drinking a lot of fluid, it
may appear that body fat is lower than it really is.
• Skin temperature can have an influence also. Measuring body fat in warm, humid
weather when skin is moist will yield a different result than if skin is cold and dry.
• As with weight, when your goal is to change body composition, it is better to track
trends over time than to use individual daily results.
• Results may not be accurate for persons under the age of 16 or persons with an
elevated body temperature, diabetes or other health conditions.
What you need to know!
• Percent body fat refers to the number of pounds of fat divided by your total body
weight and multiplied by 100.
• During weight loss, percent body fat doesn’t appear to be reduced as quickly
as expected because total weight loss and total body fat are decreasing at the
same time (for a more detailed explanation, see next section).
• Weight loss in the form of body fat and lean tissue (muscle) is common and
normal.
• To minimize the loss of lean tissue, include regular physical activity, especially
strength training, in your weight-loss plan.
Why do I lose weight but my body fat percentage doesn’t change much?
When you lose weight, both the numerator (pounds of body fat) and denominator
(total body weight) go down, so when it’s calculated as a body fat percentage, the
number can be small. For example, a person may weigh 200 pounds and have
40% body fat (= 80 pounds of body fat). He/she loses 20 pounds, but the body fat
has only dropped 4% to 36%. That 4% of body fat was 15.2 pounds of fat – a very
significant amount! So do not be overly concerned if you do not see the percentage
change quickly as you are losing weight: Monitor the absolute number of body fat
pounds lost. Remember, to minimize the loss of lean tissue, include regular physical
activity, especially strength training, in your weight-loss plan.
BMI – What Is It?
BMI stands for body mass index, a statistical term derived from height and weight. It
is closely linked to body fat and health outcomes. Over 50 organizations, including the
U.S. government and the World Health Organization, have adopted BMI guidelines.
BMI is inversely related to fitness, meaning that the higher your BMI, the less likely you
are to be fit. Every time your body analysis monitor reads your weight and calculates
your body fat, it also calculates your BMI. Along with your weight and your body fat
measurements, the BMI reading gives you yet one more tool to monitor your health
and fitness.
Body Water/Hydration Levels
General health standards indicate that one should consume approximately
64 oz. of water per day from food and liquids to maintain a healthy level of hydration.
Maintaining a good hydration level will help improve your overall health and general
feeling of well-being. If your hydration levels are lower than average, you should
increase your water intake accordingly.
Body Water/Hydration Level – How Is It Measured?
Hydration level is measured by using Bioelectric Impedance Analysis (BIA). The same
analysis that is used to calculate your body fat is used to calculate your hydration
level. Taking into consideration a user’s age and gender, a calculation is made that
determines the percentage of water.
Please note: It is not recommended to take hydration measurements in certain
situations, such as following exercise, after drinking a glass of water, or directly prior
to, during or shortly after menstrual cycles. Hydration may not be at normal levels
during these times.
Bone Mass – What Is It?
Bone is a living, growing tissue. During youth, your body makes new bone tissue
faster than it breaks down older bone. In young adulthood, bone mass is at its peak;
after that, bone loss starts to outpace bone growth, and bone mass decreases.
But it’s a long and very slow process that can be slowed down even more through
calcium-rich diets and weight-bearing exercise.
Body Analysis Table
Always keep in mind that you know your body best. The following ranges of
body fat, BMI, body water, muscle and bone mass are offered as guides.
low than than high
normal normal
Body Fat
age % % % % %
Male 20-29 <13% 13.1-18% 18.1-23% 23.1-28% 28.1%+
30-39 <14 14.1-19 19.1-24 24.1-29 29.1+
40-49 <15 15.1-20 20.1-25 25.1-30 30.1+
50-59 <16 16.1-21 21.1-26 26.1-31 31.1+
60-69 <17 17.1-22 22.1-27 27.1-32 32.1+
Female 20-29 <18 18.1-23 23.1-28 28.1-33 33.1+
30-39 <19 19.1-24 24.1-29 29.1-34 34.1+
40-49 <20 20.1-25 25.1-30 30.1-35 35.1+
50-59 <21 21.1-26 26.1-31 31.1-36 36.1+
60-69 <22 22.1-27 27.1-32 32.1-37 37.1+
Body Water
age % % % % %
Male 20-69 <46.4% 46.5-49.9% 50-65% 65.1-70% 70.1%+
Female 20-69 <43.9 44-44.9 45-60 60.1-67.6 67.7+
Bone Mass
age % % % % %
Male 20-29 <7.2% 7.3-7.5% 7.6-8.4% 8.5-8.7% 8.8%+
30-39 <7.0 7.1-7.3 7.4-8.2 8.3-8.5 8.6+
40-49 <6.6 6.7-6.9 7-7.8 7.9-8.1 8.2+
50-59 <6.2 6.3-6.5 6.6-7.4 7.5-7.7 7.8+
60-69 <5.9 6.0-6.2 6.3-7.1 7.2-7.4 7.5+
Female 20-29 <5.8% 5.9-6.1% 6.2-7% 7.1-7.3% 7.4%+
30-39 <5.6 5.7-5.9 6-6.8 6.9-7.1 7.2+
40-49 <5.2 5.3-5.5 5.6-6.4 6.5-6.7 6.8+
50-59 <4.8 4.9-5.1 5.2-6 6.1-6.3 6.4+
60-69 <4.5 4.6-4.8 4.9-5.7 5.8-6.0 6.1+
To summarize, make the most of the body analysis feature by:
H E A R T R AT E S C A L E
Instructions for Use
To get the greatest benefit from your purchase,
please read this entire brochure before using your scale.
WW934ZF
GOALS
Six Body Track Measures User Free
Analysis Results Heart Rate Goals App Memory
Body Analysis Table, continued
Muscle Mass
age lower than normal normal higher than normal
10-14 35.1 - 46.7% 46.8 - 58.3% 58.4 - 70% Male
15-19 34.1 - 45.7% 45.8 - 57.3% 57.4 - 70%
20-29 33.1 - 44% 44.1 - 55% 55.1 - 66%
30-39 32.1 - 42.3% 42.4 - 52.7% 52.8 - 66%
40-49 31.1 - 40.3% 40.4 - 49.7% 49.8 - 59%
50-59 30.1 - 38.7% 38.8 - 47.3% 47.4 - 56%
60-69 29.1 - 37.7% 37.8 - 46.3% 46.4 - 55%
70-100 28.1 - 36.7% 36.8 - 45.3% 45.4 - 54%
10-14 28.1 - 32% 32.1 - 40% 40.1 - 52% Female
15-19 27.1 - 26.7% 26.8 - 33.3% 33.4 - 47%
20-29 26.1 - 31.7% 31.8 - 37.3% 37.4 - 43%
30-39 25.1 - 30% 30.1 - 35% 35.1 - 40%
40-49 23.1 - 28% 28.1 - 33% 33.1 - 38%
50-59 22.1 - 26.7% 26.8 - 31.3% 31.4 - 36%
60-69 21.1 - 25.7% 25.8 - 30.3% 30.4 - 35%
70-100 20.1 - 24.7% 24.8 - 29.3% 29.4 - 34%
BMI
<20 20-25 25+
Who Should Monitor Bone Mass?
Most people have no need to monitor bone mass, but certain groups – post-
menopausal women, men and women with certain diseases, and anyone who takes
medications that affect bone tissue – might want to watch for decreases in bone
mass. The bone mass reading is to be used as a guide only. Watch for trends over
time and contact your healthcare provider for a more detailed explanation of the
readings and with any questions or concerns.
Important Information Concerning
Weight Management
Your scale is the best tool for monitoring weight. While not the only measure
of weight loss, scales are the most popular method used to gauge weight-loss
success. A scale measures the sum of your total body weight, which includes bone,
muscle, fat, and water.
Body weight fluctuates during the day, and from day to day, depending on a
variety of factors.
• Salt and carbohydrate intake can affect the body’s water retention.
• A large meal adds weight and can cause water retention.
• Dehydration from exercise, illness, or low fluid intake can result in weight loss.
• Muscle is also a factor. Heavy-duty resistance training can build muscle, which
can affect weight.
• The menstrual cycle can cause temporary weight gains and losses.
When You’re Losing Weight
It’s important not to put too much stock in the exact number on the scale because
it can and will vary. This is especially true when you’re dieting. Small weight gains
and losses are common as your body adjusts to fewer calories and more exercise.
Your scale is a valuable tool when used to track weight over a period of weeks and
months. Be aware that different scales often give different results. The scale at your
doctor’s office may show one weight, and your scale at home another. So don’t
get too caught up with a single number.
Don’t Overdo It!
A surefire way to get overly concerned with your weight is to weigh yourself too
often. We generally recommend weighing yourself no more than once a week when
you’re dieting. Though it’s hard to stick to this pattern, it’s the best way to prevent
unnecessary concern with normal weight fluctuations, which are unrelated to your
weight-loss efforts. Regardless of your weighing habits, it’s important that you’re
consistent.
Here are 5 rules for effectively monitoring your weight. Weigh yourself:
To keep track of your weight, record only one number for the week.
This will give you a clear picture of any trend your weight is following.
• Once a week, on the same • In the same place
day of the week • Wearing the same clothes
• At the same time of day • Using the same scale
When You’re Maintaining Weight
Fluctuations in day-to-day weight tend to be smaller when weight is stable,
so a more frequent weigh-in pattern is helpful. To maintain a stable weight:
• Weigh yourself more often than once a week.
• Use the “5-pound rule” – research shows that people who keep weight
within a 5-pound range are more likely to maintain a healthy body weight
over the long term.
Make the most of it!
• Tracking change over time and not day to day.
• Using the same scale as much as possible.
• Being extra-consistent in the time of day, day of the week, time before or after food
and fluid consumption, time before or after exercise, etc., when measuring
body composition.
While a scale/body fat monitor can be a useful tool on your weight-loss
journey, it’s not in and of itself a program for losing weight.
Come to a WW meeting and learn from us the best way to lose and
maintain weight. Call 1-800-651-6000 or go to WW.com to find a meeting
near you.
Facts You Should Know
Your WW scale is a precise measuring instrument that is most accurate when
weighing a stationary object. To ensure accurate readings, always try to stand on
the same area of the scale platform and . Should the weight on DO NOT MOVE
the scale exceed the scale’s capacity, you may see the error message “Err.”
Electronic sensors are sensitive. Be careful not to drop or jar the scale. Place it
gently onto floor surface, and store where it will be protected from impact. The
scale is an electronic instrument and should never be submerged in water. Clean
with damp cloth and/or glass cleaner.
When the scale batteries need to be replaced (display will show ), remove “Lo”
battery cover on the bottom of the scale. Replace the old batteries with 3 new
alkaline AAA batteries. Replace the battery cover. Remove used batteries promptly.
Dispose of the old batteries properly. Remove batteries from equipment
that is not to be used for an extended period of time. Do not attempt to
open the scale or to remove any components. Servicing should be done by
qualified technicians only. See warranty information below.
Supplier’s Declaration of Conformity
Brand: WW by CONAIR
Model No.: WW934ZF
Description: Bluetooth Bathroom Scale
Responsible Party: Conair LLC, 1 Cummings Point Road,
Stamford CT 06902
(203) 351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may
cause undesired operation.
Date of Issue: January 13, 2022
FCC Markings:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by Conair LLC,
the manufacturer of this product and the party responsible for compliance, could
void the user’s authority to operate the equipment.
This scale is not a toy.
Non-Rechargeable Batteries
(to be installed by the consumer)
1) This product requires 3 AAA alkaline batteries.
2) Since batteries are sensitive to high temperatures, when storing them, keep in
a cool, dry place.
3) Battery contacts need to be clean, both on the battery and in the appliance,
before installation.
4) Batteries should be removed from the appliance when not being used for long
periods of time (such as months).
5) Never recharge non-rechargeable batteries.
6) Be careful and install (+) and (-) on batteries to the correct plus and minus
on device.
7) Replace all old batteries at one time. Do not mix old and new.
8) Remove discharged batteries immediately to avoid leakage.
9) Never put batteries into a fire.
10) Switch off device after use.
11) Keep batteries away from children, especially the batteries that are small
enough to ingest.
12) If a battery is ingested, seek immediate medical help.
13) Never open, crush, puncture or disassemble batteries.
14) Dispose of batteries according to any state and local regulations
Recyclable Batteries
Alkaline batteries contain various materials that must be recycled and disposed of
properly. Do not dispose of in the municipal waste system.
Under various state and local laws, it is illegal to dispose of these batteries in
the municipal waste stream. The EPA-certified RBRC™ battery recycling seal
on the alkaline batteries indicates Conair is voluntarily participating in an industry
program to collect and recycle these batteries at the end of their useful life,
when taken out of service in the United States or Canada. The RBRC™ program
provides a convenient alternative to placing the used alkaline batteries in the
trash or the municipal waste stream, which may be illegal in your area. Please call
1-800-8-BATTERY™ for information on alkaline batteries.
Check battery recycling and disposal bans/restrictions in your area. Conair's
involvement in this program is part of our commitment to preserving our
environment and conserving our natural resources.
Or refer to the Call2Recycle link below for the nearest drop off location.
www.call2recycle.org/locator/
LIMITED TEN-YEAR WARRANTY
(U.S. & CANADA ONLY)
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed, together with your sales slip. California residents need only provide
proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In
the absence of a receipt, the warranty period shall be 120 months from the date
of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 120-MONTH DURATION OF THIS WRITTEN, LIMITED
WARRANTY. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS
OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental, or
consequential damages, so the above limitation may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state.
Please register this product at www.conair.com/registration
Service Center
Conair LLC
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2022 Conair LLC, Glendale, AZ 85307. Made in China.
©2022 WW International, Inc. All rights reserved. WW is the registered trademark of
WW International, Inc. and used under license. IB-17566
22AD082400

Product specificaties

Merk: Conair
Categorie: Niet gecategoriseerd
Model: WW934ZF

Heb je hulp nodig?

Als je hulp nodig hebt met Conair WW934ZF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Conair

Conair

Conair NPTCCA02 Handleiding

10 December 2024
Conair

Conair True Glow PB8NPRF Handleiding

10 December 2024
Conair

Conair NPTCCA01 Handleiding

10 December 2024
Conair

Conair CB06 Handleiding

20 November 2024
Conair

Conair DF22DCM Handleiding

20 November 2024
Conair

Conair Style Chemistry CB03 Handleiding

20 November 2024
Conair

Conair CB08 Handleiding

20 November 2024
Conair

Conair Bubble Wand CB05 Handleiding

20 November 2024
Conair

Conair Style Chemistry CB01 Handleiding

20 November 2024
Conair

Conair Care HM16 Handleiding

20 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024
Profoto

Profoto RFi Softbox Octa Handleiding

24 December 2024
Koenic

Koenic KAP 2523 Handleiding

24 December 2024
Philips

Philips HD9921 Handleiding

24 December 2024
Philips

Philips Senseo HD7008 Handleiding

24 December 2024
Onkyo

Onkyo IRK1804C Handleiding

24 December 2024