Conair TSIR1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Conair TSIR1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Thank you for purchasing the Travel Smar Infrared
Forehead and Ear Combination Thermometer (TSIR1).
This product features the latest technology and has
been tested according to international medical device
standards. It has been cleared by the FDA for home and
professional use. The thermometer’s unique technology
enables stable and accurate measurements every time.
This product is designed specifically to monitor body
temperature for use at home or in clinical settings.
Please read the instruction manual carefully and keep it
in a safe place for reference.
INDICATIONS FOR USE
The TSIR1 is a non-sterile, reusable, clinical electronic
thermometer using an infrared sensor to detect
human body temperature on people of all ages for
home and professional use.
WARNINGS & PRECAUTIONS
Never use the thermometer for purposes other than
those it has been intended for.
The use of this thermometer is not intended as a sub-
stitute for a consultation with your healthcare provider.
If you are concerned about your health, please see
your physician. Elevated temperature may signal a
serious illness, especially in older individuals, people
with compromised immune systems, and infants.
In order to properly diagnose an elevated temperature,
it is important to know an individual’s normal body
temperature. We suggest taking several readings
when the person is healthy, to set a baseline for their
normal temperature.
Infrared thermometers cannot be used to diagnose
COVID-19 or other illnesses. Infrared thermometers
can identify individuals with higher than average body
temperatures compared to a sample population. Only
a medical professional can determine whether an
individual is experiencing an abnormal medical condi-
tion or illness.
Note that an abnormal medical condition may be
present even when an individual does not show a
fever. When in doubt, consult your physician.
Follow general safety guidelines when using this
thermometer on children. Do not allow children to take
their temperature unattended. This is not a toy. Keep
sensor cover (cap) away from children. Do not use this
thermometer on children less than 3 months of age.
Do not use this thermometer if you have auricle
inflammation or autitis media, as it may aggravate the
condition.
Do not immerse this thermometer in water or other
liquids. Follow the instructions in the “Cleaning and
Maintenance” section to clean and disinfect the
thermometer.
The device is made of precision parts. Do not disman-
tle, re-assemble or modify the thermometer in any
way. Do not drop the thermometer and protect it from
strong impacts.
Do not use this thermometer if the sensor is broken.
If the device is broken, do not attempt to repair it
yourself. Contact the customer service center.
Do not use this thermometer in the presence of flam-
mable anesthetic mixtures with air or with oxygen or
nitrous oxide. CAUTION
Keep the device away from direct sunlight. Store in a
dry and dust-free environment, ideally within a storage
temperature range of to 131 (-204˚F ˚F ˚C to 55˚C).
Before taking temperature readings, please make sure
the sensor surface is clean. If there is visible dust or
dirt, you may clean the surface with a cotton swab
dipped in rubbing alcohol before using the device.
After cleaning the sensor head with alcohol, it is
recommended to leave the device for a few minutes
until the alcohol evaporate and the sensor head
returns to its normal temperature. We suggest
cleaning the thermometer sensor after each use, to
ensure measurement accuracy and to avoid potential
cross-contamination.
To make sure the measurement result is accurate,
wait at least 30 seconds after each measurement
before you measure again.
Because babies are slower at adapting to temperature
changes in the environment, if drastic temperature
changes are observed, it is best to wait a few minutes
in the same environment, until the baby’s body tem-
perature becomes stable, before taking any tempera-
ture readings to ensure the most accurate results.
It is recommended to take 3 temperature readings
and reference the highest recorded measurement for
babies between 3 months to 3 years of age, or for
first-time users of the device.
Do not add a protective sleeve to the sensor, as that
may affect the accuracy of the measurement.
The device requires no calibration.
Remove batteries if the equipment is not likely to be
used for some time.
The user must check that the equipment functions
safely and see that it is in proper working condition
before use.
Do not operate the product out of operating conditions
or out of the operating temperature range, as it may
cause measurement value anomalies or malfunction.
HOW THE THERMOMETER WORKS
This thermometer detects infrared energy radiated
from the skin and tissue of the forehead and in the ear
canal. This thermometer has been tested and proven
to be safe and accurate when used as directed in this
instruction manual. This device has settings that alert
you to a temperature above normal.
Normal temperature varies from person to person, by
age, and even by time of day and activity. It is best to
establish a “normal temperature range for each user
of the thermometer while the person is feeling well.
We suggest taking readings in the morning and in the
late afternoon, and averaging them to get a “normal”
temperature. Record that temperature so you can use
it to compare against temperatures measured for that
person when they are not feeling well. Note that
normal body temperatures tend to decrease with age.
The Travel Smart® Thermometer features a tempera-
ture alert setting: It will vibrate to alert you to a low-
grade and also to a high-grade fever.
Generally, temperatures in the range of
96.4˚F - 99.4˚F (35.8˚C - 37.4˚C) are considered
normal; a temperatures between 99.5˚F - 101.3˚F
(37.5˚C - 38.5˚C) are considered a light fever and
temperatures over 101.3˚F (38.5˚C) are considered
a high-grade fever.
GETTING TO KNOW YOUR THERMOMETER
SETTING UP YOUR THERMOMETER
Push the power button on the thermometer to turn on
the device. If the thermometer display does not light
up, open the battery door on the bottom of the handle
and make sure the batteries are correctly installed
with respect to polarity. Close the battery door and
press the button again. The display will light up.
Selecting temperature units
With the thermometer turned off, press and hold the
power button for 5 seconds. The thermometer will
display --- ˚C. Then press the power button again to
switch to ˚F.
BEFORE TAKING A
TEMPERATURE READING
Clean the skin of the forehead and make sure the
area is free of hair, sweat, lotion or makeup. Ear wax
residue may lead to inaccurate, low temperature
readings, so it is recommended to clean the ear prior
to using the thermometer in the ear mode.
Wait at least 30 minutes after strenuous exercise to
take your temperature.
Take the temperature in a room that does not have
significant changes in airflow, such as a room with
large fans and air conditioners. Do not take your
temperature near heat sources, such as radiators or
heat registers.
The bodys temperature adapts to the environment.
Allow at least 20 minutes to adjust to room tempera-
ture if a person is entering a room that is significantly
warmer or cooler than the room they were in
previously.
MEASURING FOREHEAD TEMPERATURE
The thermometer is in forehead mode by default
when the cap is on. Simply press the power button to
turn on the device. After about 2 seconds, the dot
matrix screen displays “FOR” and the previously cho-
sen unit of temperature (˚F or ˚C).
To take the temperature, gently touch the users fore-
head with the front of the cap: Aim at the center of the
forehead, between and slightly above the eyebrows.
Press the power button. The thermometer will vibrate
gently to indicate that the measurement is complete,
and the temperature will display on the thermometer.
The device will automatically shut down after
30 seconds.
MEASURING EAR TEMPERATURE
Remove the gray cap from the sensor head by gently
pulling on it and keep it in a safe place. Removing the
cap activates the ear measurement mode.
Press the power button to turn on the device. After a
few seconds the dot matrix screen displays “EAR
and the previously chosen temperature unit (˚F or ˚C).
Gently fit the tip of the thermometer into the ear canal
and press the power button. The thermometer indi-
cates with a soft vibration that the temperature read-
ing is complete and the temperature is displayed. The
device will automatically shut down after 30 seconds.
FEVER ALERTS
When the measured temperature exceeds a preset
level, the thermometer will vibrate to alert you to a
fever.
1. Low-level fever
When a low-level fever is detected (99.0˚F-99.3˚F or
37.2˚C-37.4˚C), the thermometer will vibrate twice,
with the display flashing at 1-second intervals.
2. High-level fever
When a higher-grade fever is detected (99.5˚F/37.5˚C
or above), the device will vibrate three times, with the
display flashing at half-second intervals.
STORED READING RECALL
Turn the device on. With the thermometer in standby
mode (display shows “FOR” or “EAR”), press and hold
the power button for about 4 seconds. The display
will show FOR/EAR. Press the power button to switch
from forehead memory mode to ear memory mode.
The recorded readings for the selected mode will
display. The device can record 12 readings in the
forehead mode, and 12 readings in the ear mode.
AUTOMATIC SHUTDOWN
This thermometer is equipped with a battery-saving
automatic shutdown feature: After 30 seconds with-
out any user action, the thermometer will power
down. You can turn it back on by simply pushing the
power button on the handle.
BATTERY REPLACEMENT
This product uses 2 AAA alkaline batteries (included).
When the display shows “LOL, it indicates that the
batteries are low and need to be replaced. To replace
the batteries, push the battery cover on the bottom of
the handle in the direction of the arrow. Take out the
old batteries and install the new batteries, making
sure the polarity is correct (note the “+” and-”
signs). Close the battery door and properly dispose of
the batteries. If the thermometer is not used for more
than 3 months, remove the batteries to prevent
potential damage from battery fluid.
Power
button
Battery
compartment
LED
BATTERY SAFETY
1. This product requires 2 AAA batteries.
2. Since batteries are sensitive to high temperatures,
keep them in a cool, dry place when storing them.
3. Battery contacts need to be clean, both on the
battery and in the appliance, before installation.
4. Batteries should be removed from the appliance
when not being used for long periods of time
(months).
5. Never recharge non-rechargeable batteries.
6. Be careful to install (+) and (-) to the correct plus
and minus on device.
7. Replace all old batteries at one time. Do not mix
old and new.
8. Remove discharged batteries immediately to
avoid leakage.
9. Never put batteries into a fire.
10. Switch off devices after use.
11. Keep batteries away from children, especially the
batteries that are small enough to ingest.
12. If a battery is ingested, seek immediate
medical help.
13. Never open, crush, puncture or disassemble
batteries.
14. Dispose of batteries according to any state
and local regulations.
15. Do not dispose of rechargeable batteries as
solid waste.
CLEANING AND MAINTENANCE
Check whether the battery level is sufficient before
each use. If the battery is low (display shows “LOL)
change the batteries and then take the temperature.
Before each use, check the equipment casing for
damage. If it is damaged, do not use. The sensor
head is the most important part of the thermometer,
and the front part (sensor mirror) is fragile. Be careful
not to damage the sensor when you clean it.
Wipe with a soft, dry cloth after each use. If the
thermometer is dirty, you may wipe the unit with
a damp cloth moistened with water or neutral
detergent, and then wipe it with a dry cloth. Avoid
water entering the body of the thermometer, so
that the internal electronic components do not
get damaged.
If you are concerned about contamination, you may
clean the thermometer with 75% alcohol before and
after use. Use only a small amount of alcohol:
Excessive amounts of alcohol can damage the
electronics of the device.
Do not use volatile oil, paint thinner, and other
chemical solvents to wipe the product.
Temperature
sensor
Forehead sensor
Instruction
Booklet
For your safety
and continued
enjoyment of
this product,
always read the
instruction
booklet carefully
before using.
Model TSIR1
SERVICE CENTER
Travel Smart® is a trademark
of Conair Corporation
Travel Smart, a division
of Conair Corporation
©2020 Conair Corporation
Glendale, AZ 85307
For information on any Conair product, call
1-800-3-CONAIR or visit us on the web at
www.conair.com
Spanish and French translations are available on website
Please register this product at
www.conair.com/registration
©2020 Conair Corporation
Made in China
IB-16971
20FZ074893
DISPLAY INDICATORS
AND TROUBLESHOOTING
PRODUCT SPECIFICATIONSKEY TO SYMBOLS
Shenzhen Belter Health Measurement and
Analysis Technology Co., Ltd.
702/704, Block C,
Tsinghua Unis Science
No.13 Langshan Rd.,
Hi-Tech Industrial Park(north). Nanshan District, 518057
Shenzhen
People’s Republic of China
Product name: Thermometer
Product No. TE-91
Measurement
range: 32.C 43.C (89.6°F ~ 109.4°F)~
Resolution: 0.1°C/0.F
Unit: ° F (default unit is °F)C
Measurement
time: 1S
Interval
measurement
time:
3S
Operating
voltage: DC 3.0V
Low battery
parameters: 2.6±0.15V
Working current: <60ma
Standby current: <25uA
Working
environment: Temperature: 10°C ~ 4C
Relative humidity: ≤80% RH
Storage
environment: Temperature: -2C ~ +5C
Relative humidity: ≤93% RH
Battery: 2x AAA
Expected
service life: Five years from the date
of production
CLASSIFICATION
Internally powered equipment
Type BF applied part: Probe
IP22
Not category AP / APG equipment
Mode of operation: continuous operation
Full display
Standby (display reads
“For” or “Ear”)
H
L
EH
EL
Err
Display shows LO,
flashes for 15 seconds,
then turns off
Shows during boot-up and
in self-test mode
Indicates thermometer is in
forehead or ear mode
“High”: The measured
temperature exceeds the
measurement range
“Low”: The measured
temperature is lower than
the measurement range
The ambient temperature
is too high to get an
accurate reading
The ambient temperature
is too low to get an
accurate reading
Sensor error; please call
customer service
Low battery
LED INDICATOR STATUS WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury
CAUTION indicates a hazardous situation
which, if not avoided, may result in minor or
m eod rate injury
NOTICE addresses practices not related to per-
sonal injuries, such as product and/or property
damage
Type BF
Do not dispose of this product in municipal
waste. Collection of such waste separately
for special treatment is necessary
Refer to instruction manual/booklet
Degree of protection against harmful ingress of
particulate matter and water
Manufacturer
Serial number
The package should be protected from rain
The package contains fragile products; please
handle with care
Transport package should be upright
The maximum stacking layer of the same
package; 5 means the layer limit
LIMITED THREE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit
free of charge for 36 months from the date of
purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return the
defective product to the service center listed, togeth-
er with your purchase receipt. California residents
need only provide proof of purchase and should call
1-800-3-CONAIR for shipping instructions. In the
absence of a purchase receipt, the warranty period
shall be 36 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 36-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or
limitation of special, incidental, or consequential
damages, so the above limitation may not apply
to you. This warranty gives you specific legal rights,
and you may also have other rights, which vary from
state to state.
FCC MARKINGS:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modifications not expressly
approved by Conair Corporation, the manufacturer of
this product and the party responsible for compliance,
could void the user’s authority to operate the equip-
ment. This thermometer is not a toy
.
SUPPLIER’S DECLARATION OF CONFORMITY
Brand: Travel Smart® by Conair
Model No.: TSIR1
Description: Infrared Forehead & Ear Thermometer
Responsible Party: Conair Corporation,
1 Cummings Point Road, Stamford, CT 06902
203-351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
Date of issue: April 22, 2020
Belter model number TE-91
infrared
FOREHEAD + EAR
THERMOMETER
ACCURATE SAFE FAST
Compact and convenient for travel or for home use.
FDA
cleared


Product specificaties

Merk: Conair
Categorie: Niet gecategoriseerd
Model: TSIR1

Heb je hulp nodig?

Als je hulp nodig hebt met Conair TSIR1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Conair

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd