Citizen CAL 6840 Handleiding

Citizen Horloge CAL 6840

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Citizen CAL 6840 (21 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
Setting Instructions for
Movement Caliber 6840
Contents (click on a topic)
1) Outline
2) Main Components
3) Mode Change-Over
4) Before Using
a) 0-Position Setting
5) How to Set and Operate Each Mode
a) Setting the Time
b) Using Race Mode 1
c) Using Race Mode 2
d) Using Race Mode 3
e) Setting the Timer
f) Stopwatch (Chronograph) Operation
g) Setting the Alarm
h) Alarm Monitor in the Normal Time Mode
i) All-Reset Function
6) Use of the Rotating Bezel
7) Specifications
8) Care of Your Timepiece.
1. OUTLINE
This is an analog multi-function quartz watch having eight operation modes that
can be changed with the push button.
Main Features
Race 1: 10-minute graphic timer
Auto-Chronograph after time up
Repeated timer
Race 2: 10, 5-minute graphic timer
Auto-Chronograph after time up
Race 3: 3-,5-,10-minute graphic timer
Timer: 90-minute timer
Chronograph
Alarm
2. Main Components
Return to Table of Contents
Return to Table of Contents
3. MODE CHANGE OVER
Push the (M)(lower right) button to switch between modes as shown below
Note: Be sure to check the mode hand to ensure that the watch is set in the desired
mode for use. Pressing the (M)(lower right) accidentally during operation may occur.
4. BEFORE USE
Before use, follow the procedure below to ensure that all watch components are
in proper working order.
Zero Position Confirmation Check
1. Check each hand positioned as listed below
Confirm and correct if necessary
Hour Hand 12:00
Minute Hand 0 minutes
Second Hand 0 seconds
(2) If the watch hands are not positioned as above, follow the Zero position
setting procedures to ensure proper use
ξ‚™Push the (A) (B) or (C) button, with the (M) button in the normal position,
to activate the circular graphic display minute scale, hand movement check
ZERO POSITION SETTING
1. Pull the (M) button out to the 1st
step position.
Reset the Watch, see section β€œAll Reset
Function”
Push the (A) button to move the second
hand to the 0 position.
Push the (B) button to align the arrows on
the minutes scale and dial.
Push the (C) button to move the
hour/minute hands to the 12:00 position.
2. Push the (M) button in to the normal position to complete setting procedures.
ξ‚™Any strong shock to the watch may cause the hands to shift from the β€œ0”
position. In this case, reset to the correct Zero position.
ξ‚™Press and hold down either (A) (B) or (C) buttons for the quick-advance
feature
ξ‚™Occasionally check to ensure the hands are in the correct Zero Position
ξ‚™Slight irregular movement may occur when setting the second hand Zero
position. This movement is normal and has no adverse effect on any watch
function.
TME
Normal
time mode
R-1
Race 1
R-2
Race 2
R-3
Race 3
>0<
Zero Position
Confirmation
CHR
Stop-Watch
Mode
TMR
Timer
Mode
ALM
Alarm
Mode
Circular graphic display
minute scale
Return to Table of Contents
Return to Table of Contents
to β€œ0” mode
(Zero Position confirmation mode)


Product specificaties

Merk: Citizen
Categorie: Horloge
Model: CAL 6840

Heb je hulp nodig?

Als je hulp nodig hebt met Citizen CAL 6840 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Citizen

Handleiding Horloge

Nieuwste handleidingen voor Horloge