Citizen AT2100-09E Handleiding

Citizen Horloge AT2100-09E

Lees hieronder de 📖 handleiding in het Nederlandse voor Citizen AT2100-09E (1 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
H50x/H57x Abbreviated instruction
• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual: H50x/ H57x instruction manual
Setting the time
1.
Pull the crown out to position 2 when the second hand
points to 12:00 (0 second).
2.
Rotate the crown to set the time.
• Referring to the 24-hour hand, set the time to ensure proper AM or
PM time is set.
• Move the hands 4 or 5 minutes forward of desired minutes and move
them back to the right time to set the time more precisely.
3.
Push the crown in to position 0 in accordance with a
reliable time source.
The second hand starts moving.
H57x
Minute hand
Minute hand
4-hour hand
4-hour hand
Date indication
Date indication
Button
â’¶
Button
â’¶
Chronograph
second han
Chronograph
second han
Chronograp
minute hand
Chronograp
minute han
Second han
Second han
Hour han
Hour han
on
â’·
on
â’·
rown
rown
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
Setting the date indication
• Do not adjust the date indication when the watch shows 9:00 PM - 1:00
AM. Otherwise the date indication may change incorrectly.
• Date indication adjustment is required on the first of the following months:
March, May, July, October and December.
1.
Pull the crown out to position 1.
2.
Rotate the crown clockwise to adjust the date indication.
• Counterclockwise rotation moves nothing.
3.
Push the crown in to position 0.
Using the chronograph
Movement Caliber H50x can measure up to 60 minutes by 1 second.
Movement Caliber H57x up to 30 minutes by 1 second.
• The hour, minute and 24-hour hands move normally during chronograph
measurement.
1.
Push the crown in to position 0.
Start/stop:
press and release the upper right button â’·.
• Press and release lower right button Ⓐ to return the chronograph
minute hand to 00 minute position before starting measurement if it is
not at the position.
Reset:
press and release lower right button
â’¶ while the chronograph is
stopped.
• Applying strong shock to the watch during chronograph measurement
may move the chronograph minute hand to an incorrect position. In
such a case, press button â’¶ securely to return the chronograph minute
hand to 00 minute position.
Adjusting the chronograph second hand to the 0 second position
Execute the operation below when the chronograph second hand does not
return to 0 second position after resetting or the hand points to an incorrect
position because of strong shock or other reasons.
• You cannot execute this operation when the insufficient charge warning
function is activated. You must fully charge your watch.
1.
Pull the crown out to position 2.
2.
Press and hold the upper right button â’· for 3 or more seconds.
• Press and release the upper right button
â’· to adjust the chronograph
second hand to 0 second position (12:00 position).
Each time you press the button, the hand moves by 1 second.
Press and hold the button to move the hand continuously.
3.
Push the crown in to position 0.
• Press and release the lower right button
â’¶ to confirm the chronograph
minute hand returns to 00 minute position.
Crown’s position
0 1 2
Crown’s position
0 1 2
Component identification
H50x
CITIZEN WATCH CO., LTD.
ENGLISH


Product specificaties

Merk: Citizen
Categorie: Horloge
Model: AT2100-09E

Heb je hulp nodig?

Als je hulp nodig hebt met Citizen AT2100-09E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Citizen

Handleiding Horloge

Nieuwste handleidingen voor Horloge