Cisco WRP500 Handleiding

Cisco Router WRP500

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco WRP500 (154 pagina's) in de categorie Router. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/154

Cisco Systems, Inc.

www.cisco.com

Cisco has more than 200 offices worldwide.

Addresses, phone numbers, and fax numbers

are listed on the Cisco website at

www.cisco.com/go/offices.

Cisco WRP500 Administration Guide

Wireless-AC Broadband Router with 2 Phone Ports and Built-In Analog

Telephone Adapter

Published: January 30, 2015

Revised: April 29, 2015

ADMINISTRATION GUIDE

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required

to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be

determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this

URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display

output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in

illustrative content is unintentional and coincidental.

iii

Cisco WRP500 Administration Guide

C O N T E N T S

C H A P T E R

1Product Overview and Deployment Guidelines 1-1

WRP500 Features and Benefits 1-1

Deployment Models 1-2

WRP500 Deployment in a Basic Network 1-3

WRP500 Deployment with a Wireless Guest Network 1-4

WRP500 Deployment with Mobile Broadband 1-5

Mobile Office That Uses the Mobile Network for Internet Access 1-5

Basic Office Deployment That Uses the Mobile Network as a Backup Connection 1-6

Local Area Network Guidelines 1-6

Power, Cabling, and Telephone Lines 1-6

Basic Services and Equipment 1-7

Special Requirements for Voice Deployments 1-7

Bandwidth for Voice Deployments 1-7

NAT Mapping for Voice over IP Deployments 1-8

Local Area Network Design for Voice Deployments 1-9

WRP500 Maintenance Operations 1-9

Remote Provisioning 1-10

Upgrade URL 1-10

Resync URL 1-11

Reboot URL 1-11

Configuration Profile 1-12

XML Format 1-12

Binary Format 1-12

C H A P T E R

2Configure Your System for ITSP Interoperability 2-1

Configure NAT Mapping 2-1

Configure NAT Mapping with a Static IP Address 2-1

Configure NAT Mapping with STUN 2-2

Determine Whether the Router Uses Symmetric or Asymmetric NAT 2-4

Firewalls and SIP 2-5

Configure SIP Timer Values 2-5

Product specificaties

Merk:	Cisco
Categorie:	Router
Model:	WRP500
Kleur van het product:	Zwart
Gewicht:	440 g
Breedte:	170 mm
Diepte:	170 mm
Hoogte:	33 mm
LED-indicatoren:	LAN, Power, USB, WLAN, WPS
Wi-Fi-standaarden:	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Stemcodecs:	G.711u, G.711, G.729, G.729ab
USB-poort:	Ja
Ethernet LAN:	Ja
Type stroombron:	AC
Meegeleverde kabels:	LAN (RJ-45)
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	4
Certificering:	FCC (Part 15 Class B), CE, ICES-003, RoHS\nCB, IC, UL
Aansluiting voor netstroomadapter:	Ja
SIM-kaartsleuf:	Nee
3G/4G USB modem compatibiliteit:	Ja
Geheugenkaart slot(s):	Nee
RJ-11 ports kwantiteit:	2
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Wifi-standaard:	Wi-Fi 5 (802.11ac)
WLAN gegevensoverdrachtsnelheid (eerste band):	2400 Mbit/s
WLAN gegevensoverdrachtsnelheid (tweede band):	5 Mbit/s
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ondersteunde beveiligingsalgoritmen:	64-bit WEP, 128-bit WEP, WPA, WPA2, WPS
Antennas quantity:	2
Antenne versterkingsniveau (max):	2 dBi
Temperatuur bij opslag:	-30 - 60 °C
Upgraden van firmware mogelijk:	Ja
Web-gebaseerd management:	Ja
Reset button:	Ja
Ethernet WAN:	Ja
Firewall:	Ja
DoS aanval preventie:	Ja
Output current:	1.67 A
Spanning:	12 V
DHCP server:	Ja
Universal Plug and Play ( UPnP ):	Ja
Quality of Service (QoS):	Ja
DHCP client:	Ja
Network address translation (NAT):	Ja
DMZ support:	Ja
DSL WAN:	Nee
WPS Push Button Security:	Ja
VoIP protocollen:	SIP v2, RFCs 3261, 3262, 3263, 3264
Afneembare antennes:	Nee
Beheerprotocollen:	SNMP v1, v2c
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	7.9 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Type product:	Router om neer te zetten
VPN eigenschappen:	IPsec, L2TP, PPTP
Antenne-ontwerp:	Extern
Routing protocols:	RIP-1, RIP-2
System event log:	Ja