Cisco ASR 1001 Handleiding

Cisco Router ASR 1001

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco ASR 1001 (44 pagina's) in de categorie Router. Deze handleiding was nuttig voor 111 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/44

C H A P T E R

11-317

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Cisco ASR 1001 Router Overview and Installation

This chapter describes the Cisco ASR 1001 Router and provides procedures for installing the

Cisco ASR 1001 Router on an equipment shelf or tabletop or in an equipment rack.

This chapter contains the following sections:

• Cisco ASR 1001 Router Description, page 11-317

• Installation Methods, page 11-332

• General Rack Installation Guidelines, page 11-333

• Guidelines for an Equipment Shelf or Tabletop Installation, page 11-334

• Mounting the Cisco ASR 1001 Router on an Equipment Shelf or Tabletop Installation, page 11-334

• Rack-Mounting the Cisco ASR 1001 Router, page 11-336

• Attaching the Chassis Rack-Mount Brackets, page 11-337

• Installing the Cisco ASR 1001 Router in a Rack, page 11-338

• Attaching the Cable-Management Bracket, page 11-342

• Attaching a Chassis Ground Connection, page 11-343

• Connecting the Shared Port Adapter Cables, page 11-346

• Connecting the Console and Auxiliary Port Cables, page 11-346

• Connecting a Terminal to the Cisco ASR1000-RP1 Console Port, page 11-347

• Connecting Cables, page 11-347

• Auxiliary Connection, page 11-348

• Overview of AC and DC Power Supplies for the Cisco ASR 1001 Router, page 11-348

•Cisco ASR 1001 Router Power Supply Installation, page 11-348

Cisco ASR 1001 Router Description

The Cisco ASR 1001 Router is part of the Cisco aggregation services family of routers. The Cisco

ASR 1001 Router offers a compact form factor router that satisfies customer demands such as low power

consumption and decreased usage of rack space. The Cisco ASR 1001 Router has the route processor,

embedded services processor, and SIP integrated within the chassis with one half-height SPA slot.

By default, the Cisco ASR 1001 Router is shipped with 4 GB of DRAM. To implement software

redundancy, a minimum of 8 GB memory must be installed on the router.

11-318

Cisco ASR 1000 Series Aggregation Services

Routers Hardware

Installation Guide OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Cisco ASR 1001 Router Description

The Cisco ASR 1001 Router supports:

• ESP bandwidth 2.5 Gbps (default) to 5 Gbps of forwarding performance (optional software option)

• ESP memory: 1-GB DRAM default; 1-GB DRAM maximum

• Route-processor memory comes with 4-GB DRAM (default); 8-GB DRAM maximum

• 4-Gigabit Ethernet small form-factor pluggable (SFP) ports

For information about the SFP transceiver modules that are compatible with Cisco ASR 1002

Built-in Gigabit Ethernet Ports (4x1GE), refer to the “Modular Optics Compatibility” section in

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide.

• External USB flash memory 1-GB USB flash memory support

Cisco ASR 1001 Router Architecture

The Cisco ASR 1001 Router provides all the Cisco ASR 1000 Series Router features, services, and

performance in a small form-factor chassis. The chassis contains a single integrated mainboard that

implements all functions of the route processor (RP), a SPA embedded processor (SIP), a forwarding

processor (ESP) and a built-in 4x1 GE SPA.

The SPA interface is connected to a built-in 4xGE SPA, a single half-height (HH) SPA bay, and one

flexible integrated daughter card (IDC), providing additional SPA interfaces.

Cisco ASR 1001 Router hardware features include:

•Front-to-back air flow, with 7 built-in cooling fans, numbered from left to right, zero (0) to 6.

• Supports 1 + 1 redundant AC or DC power supplies.

• A cover interlock prevents cover removal with power supplies installed.

• Provides one half-height SPA bay (Bay 1 online insertion and removal (OIR) supported) and

integrates a passive board, which consists of a standard SPA interface connector and an interface

connector, to the mainboard.

• Support for one factory-configurable integrated daughter card in SPA Bay 2. The integrated

daughter card, in SPA Bay 2 is part of the base configuration, and is not an option.

• Provides unique front panels for each integrated daughter card configuration.

• 8 GB internal flash

• Console and Auxiliary RJ-45 ports

• 4 GB DRAM (default)

• Forwarding Performance = 2.5G default, 5G with software license

The Cisco ASR 1001 Router can accommodate different integrated daughter cards. The chassis top cover

includes the integrated daughter card front panel with a common base chassis.There will be different top

covers for each integrated daughter cards and one for orders with no integrated daughter card.

The Cisco ASR 10001 Router can be shipped with different orderable configurations. The following IDC

configurations are available:

Note See Appendix D, “MIBs for the Cisco ASR 1001 Router” for information about the MIBs that can be

used to manage these IDCs.

• IDC-HD80G

11-319

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 11 Cisco ASR 1001 Router Overview and Installation

Cisco ASR 1001 Router Description

IDC-HD80G can support a single 2.5-inch SATA HDD/SSD (see Figure 11-1).

Figure 11-1 Cisco ASR 1001 Router with IDC-HD80G

1 HDD Online—LED indicates that the disk is

ready and can be accessed

7 LINK LED—Indicates MGMT Ethernet port

activity

2 HDD Activity—LED indicates that the disk is

currently being accessed

8 BF—Internal bootflash LED that indicates

activity of the EUSB device

3 HDD Slot—Slot into which the HDD is

inserted (the figure shows an HDD inserted

into the slot)

9 USB LED

4 AUX—RS-232 auxiliary port with modem

control signals

10 USB port—USB high-speed (480 Mbps) port

used for secure key storage, VPN credentials

storage, or bulk flash storage of image and

configuration backup

This USB port is an A port.

5 CON—RS-232 console port 11 STAT—Status LED

6 MGMT—RJ-45 10/100/1000 management

Ethernet port

12 PWR—Power LED

279784

ASR 1001

LINK

IDC-HD80G

PWR

STAT

CRIT

MAJ

MIN

USB

MGMT CON AUX

HDD ONLINE

ACTIVITY

3 1 2

4511

Product specificaties

Merk:	Cisco
Categorie:	Router
Model:	ASR 1001
Kleur van het product:	Grijs
Gewicht:	11350 g
Breedte:	439.42 mm
Diepte:	461.5 mm
Hoogte:	43.43 mm
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Ethernet LAN:	Ja
Type stroombron:	AC
Aantal Ethernet LAN (RJ-45)-poorten:	4
Aantal USB-aansluitingen:	1
Certificering:	FCC 47CFR15 Class A\nAS/NZS CISPR 22\nCISPR 22 Class A\nEN55022 Class A\nICES-003 Class A\nVCCI Class A\nCNS-13438 Class A\nEN61000-3-2\nEN61000-3-3
Aansluiting voor netstroomadapter:	Ja
Intern geheugen:	8192 MB
Type processor:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Temperatuur bij opslag:	0 - 50 °C
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	5 - 95 procent
Rack-montage:	Ja
MAC adres filtering:	Ja
Ethernet WAN:	Ja
Firewall:	Ja
Veiligheid:	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Ethernet interface type:	Gigabit Ethernet
Hoogte, in bedrijf:	0 - 3048 m
Quality of Service (QoS):	Ja
DMZ support:	Ja
Full duplex:	Ja
VPN tunnels quantity:	8000
Rackcapaciteit:	1U
AC-ingangsspanning:	85 - 264 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	250 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent