Cisco 10000-1P3-1DC Handleiding

Cisco Router 10000-1P3-1DC

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco 10000-1P3-1DC (6 pagina's) in de categorie Router. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Data Sheet

Cisco 10000 Series Performance Routing Engine 3

The Cisco® 10000 Series Performance Routing Engine 3 (PRE-3) (Figure 1) increases

the performance, feature set, and scalability of the Cisco 10000 Series Router.

Product Overview

The Cisco 10000 Series is a service provider edge aggregation router that oﬀers a single solution

for leased-line, ATM, Frame Relay, and broadband aggregation while providing customers with

high-performance IP services, maximum platform scalability, and high availability.

Service providers require scalable networks to proﬁtably meet their customers’ requirements for

better performance, more services, and higher reliability. Edge routers, such as the Cisco 10000

Series, will be needed to manage higher-bandwidth requirements, more subscribers, and multiple

service levels ranging from best-eﬀort consumer Internet data services to high-priority business

applications, voice, and video.

Figure 1. Cisco 10000 Series Performance Routing Engine 3

Designed to meet new requirements from service providers for high-capacity aggregation with

sophisticated IP services, the Cisco 10000 Series PRE-3 uses the latest generation of the Cisco

patented Parallel Express Forwarding (PXF) technology. PXF is a parallel multiprocessor

architecture that helps enable deployment of multiple IP services while maintaining peak

performance throughput. The PRE-3 also introduces the Hierarchal Queuing Framework (HQF) to

the Cisco 10000 Series Routers. The HQF implementation on the PRE-3 allows three levels (class,

logical, and physical) of scheduling to apply queuing and shaping (see Figure 2).

Applications

The Cisco 10000 Series PRE-3 can be used to deliver triple-play services for both ATM and

Ethernet transport networks. A service provider can use the ﬂexibility and performance of the PRE-

3 to simultaneously deliver data, voice, and video to both residential and business customers.

Ethernet service examples include:

● Class – Multiple packet queues for data, voice, or video

● Logical – PPP sessions grouped by Gold, Bronze, or Silver packages for bandwidth and

quality of service (QoS) levels

● Physical – VLANs to separate consumer, business, and wholesale customers

Data Sheet

ATM service examples include:

● Class – Multiple packet queues for data, voice, or video

● Logical – ATM VCs (virtual circuits) grouped by Gold, Bronze, or Silver packages for

bandwidth and QoS levels

● Physical – ATM Virtual Paths (VPs) to separate consumer, business, and wholesale

customers

Figure 2. Examples of Three-Level Scheduling with HQF and the Cisco 10000 Series PRE-3

Key Features and Beneﬁts

The Cisco 10000 Series PRE-3 delivers both scalability improvements and new features:

● Provides up to 9.7 million packets per second (mpps) of processing power for increased

throughput

● Implements Hierarchal Queuing Framework (HQF) for up to three levels of service

granularity

● Supports connection between the PRE-3 and the 51-Gbps chassis backplane

3.2 Gbps transmit and receive to each full-height line card

1.6 Gbps transmit and receive to each half-height line card

● Includes 800-MHz route processor with 2GB ECC protected DRAM for new features and

scalability improvements

● Delivers enhanced storage options for larger and more complex conﬁgurations

14 MB nonvolatile RAM (NVRAM)

128 MB Compact Flash – ﬁxed internal memory

512 MB or 1GB Compact Flash – front panel removable memory

● Uses Cisco patented PXF technology to provide maximum IP service ﬂexibility without

performance impact

● Supports processor redundancy – helping enable 99.999-percent network uptime

Data Sheet

Product Speciﬁcations

Table 1. Product Speciﬁcations

Description Speciﬁcation

Product Compatibility Compatible with the Cisco 10008 8-slot chassis

Software Compatibility

Compatible with Cisco IOS® Software Release 12.2(31)SB and later Cisco IOS 12.2 images

supported on the Cisco 10000 Series

Connectivity and

Controls

10/100 Ethernet port network management interface with RJ-45 connector

Console serial port

Auxiliary (modem) port

Push button reset

Features and

Functions

Supports 61,500 broadband subscribers

Hierarchal Queuing Framework (HQF) provides up to 3 levels of QoS or shaping per packet

9.7-mpps forwarding performance through the PXF complex

LEDs Alarms: Critical/Major/Minor (yellow, three per card)

● ON indicates an alarm condition

● OFF indicates no alarm

Fail (yellow, one per card)

● ON indicates that a major failure has disabled the Cisco PRE-3

● OFF indicates that the Cisco PRE-3 is operating properly

Status (bicolor, one per card)

● Flashing yellow indicates that the system is booting

● Green indicates that Cisco PRE-3 is active (as a primary)

● Flashing green indicates that Cisco PRE-3 is standby (as a secondary)

● OFF indicates no power to Cisco PRE-3

Ethernet activity/link (green, two per card)

● Activity: Green indicates packets are being transmitted and received

● Link: Green indicates carrier detected; the port is able to accept traﬃc

CF card slot 0 (green – ON indicates slot 0 is active)

Memory Route processor memory: 2GB ECC protected DRAM

Onboard memory: 128 MB Compact Flash, 14 MB NVRAM (7 MB primary and 7 MB backup)

Removable memory: 512 MB or 1GB Compact Flash

Packet memory: 256 MB ECC protected

Performance PXF performance: 9.7 million packets per second

RP forwarding performance: 400,000 packets per second

Reliability and

Availability

Supports Online Insertion and Removal (OIR)

Support Nonstop Forwarding (NSF) and Stateful Switch Over (SSO)

Supports In-Service Software Upgrades (ISSUs)

Product specificaties

Merk:	Cisco
Categorie:	Router
Model:	10000-1P3-1DC
Gewicht:	59020 g
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Aantal USB-aansluitingen:	2
Ingangsspanning:	100 - 240 V
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Netwerkstandaard:	IEEE 802.1p
Temperatuur bij opslag:	-40 - 70 °C
Relatieve luchtvochtigheid:	5 - 95 procent
Web-gebaseerd management:	Ja
Ethernet WAN:	Ja
Gewicht (imperiaal):	130 lbs
Hoogte, in bedrijf:	60 - 4000 m
Afmetingen (B x D x H):	552 x 445 x 305 mm
Full duplex:	Ja
Stroomverbruik (typisch):	1280 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent