Chief TA502 Handleiding

Chief Flat panel steun TA502

Lees hieronder de 📖 handleiding in het Nederlandse voor Chief TA502 (12 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

I N S T A L L A T I O N I N S T R U C T I O N S

WITH TS118 WITH TS218

THINSTALL™ IN-WALL ENCLOSURE

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

TA502

TA502 Installation Instructions

DISCLAIMER

Milestone AV Technologies, and its affiliated corporations and

subsidiaries (collectively, "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component. The wall to which the mount is being attached

may have a maximum drywall thickness of 5/8" (1.6cm).

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the structure to which

this accessory is attached can support the combined weight

of the box and all equipment not to exceed 75 lbs (34.0 kg).

The combined weight of all components attached to the

TS118SU mount cannot exceed 35 lbs (15.9 kg). The

combined weight of all components attached to the TS218SU

mount cannot exceed 75 lbs (34.0 kg).

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

NOTES:

• SUITABLE FOR USE IN OTHER

ENVIRONMENTAL AIR SPACE IN

ACCORDANCE WITH SECTION 300.22, (C)

OF THE NATIONAL ELECTRICAL CODE.

• The equipment shall be installed and

assembled by qualified service personnel.

• The maximum specified ambient temperature

of the cabinet system is 40° - 120°F (4° - 49°).

• Minimum spacings between the accessories

and components and the housing for

Information Technology Communication

Equipment shall be maintained for safe

operation of the equipment when installed in

accordance with the National Electric Code,

ANSI/NFPA 70-1999. Refer to communication

equipment manufacturer’s specifications for

minimum spacings.

• This Cabinet System is for use with Listed wall

mounts. Refer to the individual mount’s

installation instructions for compatibility.

--SAVE THESE INSTRUCTIONS--

Installation Instructions TA502

DIMENSIONS

LEGEND

18.85

478.8

GROUNDING

TRIM NOT SHOWN

(USE THESE DIMENSIONS FOR CUTOUT)

NOTES:

ELECTRICAL KNOCK OUTS:

SINGLE GANG RACO 590.• STEEL CITY CY 1/2, OR

SIMILAR STYLE ELECTRICAL

BOX.

1" AND 2" TRADE PIPE CONDUIT.•

PRODUCT WORKS WITH TS118 AND TS218.

DIMENSIONS: INCHES

[MILLIMETERS]

Tighten Fastener

Apretar elemento de fijación

Befestigungsteil festziehen

Apertar fixador

Serrare il fissaggio

Bevestiging vastdraaien

Serrez les fixations

Loosen Fastener

Aflojar elemento de fijación

Befestigungsteil lösen

Desapertar fixador

Allentare il fissaggio

Bevestiging losdraaien

Desserrez les fixations

Phillips Screwdriver

Destornillador Phillips

Kreuzschlitzschraubendreher

Chave de fendas Phillips

Cacciavite a stella

Kruiskopschroevendraaier

Tournevis à pointe cruciforme

Pencil Mark

Marcar con lápiz

Stiftmarkierung

Marcar com lápis

Segno a matita

Potloodmerkteken

Marquage au crayon

Drill Hole

Perforar

Bohrloch

Fazer furo

Praticare un foro

Gat boren

Percez un trou

Hex-Head Wrench

Llave de cabeza hexagonal

Sechskantschlüssel

Chave de cabeça sextavada

Chiave esagonale

Zeskantsleutel

Clé à tête hexagonale

Product specificaties

Merk:	Chief
Categorie:	Flat panel steun
Model:	TA502
Kleur van het product:	Zwart
Breedte:	362 mm
Diepte:	101 mm
Hoogte:	437 mm
Maximale gewichtscapaciteit:	34 kg
Compatibiliteit:	TS218SU, TS118SU