Casio Vintage B640WC-5AEF Handleiding

Casio Horloge Vintage B640WC-5AEF

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Vintage B640WC-5AEF (3 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Operation Guide 3294

E-9

3. When the setting you want to change is ﬂ ashing, press to change it as D

described below.

To change this setting Perform this button operation

Seconds Press to reset to .D00

Hour, Minutes, Year, Month, Day Press to increase the setting.D

Pressing xD while the seconds are in the range of 30 to 59 resets them to and 00

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

To toggle between the 12-hour and 24-hour formats, press

while some

digits are ﬂ ashing.

Press 4. to exit the setting screen.A



x The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.



x The year can be set in the range of 2000 to 2099.

E-8

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

In the Timekeeping Mode, press 1. . The seconds digits A

will start to ﬂ ash, which indicates the setting screen.

Press 2. to move the ﬂ ashing in the sequence shown C

below to select other settings.

Seconds Hour Minutes

YearMonthDay

C C

Day of week

Month

Day

PM indicator

Hour

Minutes

Seconds

E-7

After you perform an operation in any mode, pressing xC returns to the

Timekeeping Mode.

Press

xB in any mode to illuminate the display for about two seconds.

Countdown Timer Mode Stopwatch Mode

E-6

General Guide

Press xC to change from mode to mode.

Timekeeping Mode Alarm Mode

C C

E-5E-4

E-18 Countdown Timer

E-19 To set the countdown start time

E-20 To use the countdown timer

E-21 To turn auto-repeat on and off

E-22 Stopwatch

E-23 To measure times with the stopwatch

E-24 Reference

E-25 Speciﬁ cations

E-3

Contents

E-2 About This Manual

E-6 General Guide

E-8 Timekeeping

E-8 To set the time and date

E-11 Backlight

E-11 To switch the backlight function on and off

E-13 Alarm

E-15 To set the alarm time

E-16 To stop the alarm

E-17 To switch an alarm and Hourly Time Signal on and off

E-2

About This Manual

x Depending on the model of your watch, display text

appears either as dark ﬁ gures on a light background or

light ﬁ gures on a dark background. All sample displays

in this manual are shown using dark ﬁ gures on a light

background.

Note that the product illustrations in this manual are x

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

Button operations are indicated using the letters shown x

in the illustration.



x Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

MA1110-EA

Operation Guide 3294

E-19

To set the countdown start time

In the Countdown Timer Mode, press 1. . The hours digits of the countdown start A

time will start to ﬂ ash, which indicates the setting screen.

Press 2. to move the ﬂ ashing in the sequence shown below to select other C

settings.

Hours Minutes Seconds

C C

While a setting is ﬂ ashing, press 3. to increase it.D

To set the starting value of the countdown time to 24 hours, set x0:00' 00.

Press 4. to exit the setting screen.A

E-18

Countdown Timer

The countdown timer can be set within a range of 1 second

to 24 hours. When the countdown reaches zero, an alarm

sounds for 10 seconds or until you press any button.

You can also select auto-repeat, which automatically x

restarts the countdown from the original value you set

whenever zero is reached.

Countdown timer functions are available in the x

Countdown Timer Mode, which you enter by pressing

C (page E-7).

Hours

Minutes

Seconds

Mode indicator

Current time

E-17

To switch an alarm and Hourly Time Signal on and off

Press while in the Alarm Mode to change the status of D

an alarm and Hourly Time Signal in the sequence shown

below.

Both off

Hourly Time Signal onlyBoth on

Alarm only

x The alarm on indicator and the Hourly Time Signal on

indicator are shown on the display in all modes while

these functions are turned on.

Hourly Time Signal

on indicator

Alarm on indicator

E-16

To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set x

for the day. Press until the D mark appears (between the end of the month

and ) while the day setting is ﬂ ashing.

When setting the alarm time using the 12-hour format, take care to set the time x

correctly as a.m. or p.m. ( indicator).PM

Press 4. to exit the setting screen.A

To stop the alarm

Press any button to stop the alarm after it starts to sound.

E-15

To set the alarm time

In the Alarm Mode, press 1. . The hour digits of the alarm time will start to ﬂ ash, A

which indicates the setting screen.



x This operation automatically turns on the alarm.

Press 2. to move the ﬂ ashing in the sequence shown below to select other C

settings.

Hour Minutes Month Day

C C

While a setting is ﬂ ashing, press 3. to increase it.D

To set an alarm that does not include a month (Daily alarm, Monthly alarm), set x

for the month. Press until the mark appears (between and ) while D

month setting is ﬂ ashing.

E-14

Alarm Types

The alarm type is determined by the settings you make, as described below.

Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the speciﬁ c time, on the speciﬁ c date you set.

1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at the time you set, only during the month you set.

Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the

alarm to sound every month at the time you set, on the day you set.

E-13

Alarm

The multi-function alarm lets you specify the hour,

minutes, month, and day for the alarm (page E-14). When

the alarm is on, the alarm sounds for 20 seconds at the

preset time. When the Hourly Time Signal is on, the

watch beeps every hour on the hour.

The alarm and the Hourly Time Signal sound in all x

modes.

An alarm setting (and an Hourly Time Signal setting) x

is available in the Alarm Mode, which you enter by

pressing (page E-6).C

Hourly Time Signal

on indicator

Alarm on indicator

Mode indicator

Month

Hour

Minutes

Day

E-12

Backlight Precautions

The backlight uses an LED (light-emitting diode) and a light guide panel that cause

the entire display to glow for easy reading in the dark.

In any mode, press to illuminate the display for about two seconds.B



x The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.



x The backlight automatically stops illuminating whenever an alarm sounds.

x Frequent use of the backlight shortens the battery life.

E-11

Backlight

When you switch the backlight function on, the backlight of the watch ﬂ ashes

whenever Alarm, Hourly Time Signal or Countdown Timer is sounding.



x Pressing at any time illuminates the display, regardless of the backlight’s B

on/off setting.

To switch the backlight function on and off

In the Timekeeping Mode, hold down for about two D

seconds to switch the backlight function on and off. When

you switch the backlight function on, an indicator appears

on the display as shown.



x The backlight function on indicator remains on the

display in all modes until you switch the backlight

function off.



x The above operation controls operation of the backlight

function only. It does not affect operation of audible

tones and signals.

Backlight function on

indicator

E-10

x The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be

no reason to change it except after you have the watch’s battery replaced.

With the 12-hour format, the xPM indicator appears for times in the range of noon

to 11:59 p.m. and no indicator appears for times in the range of midnight to

11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with x

the indicator.24H

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x

applied in all other modes.

Operation Guide 3294

E-26

Other: Backlight (light-emitting diode)

Battery: One lithium battery (Type: CR2016)

Approximately 3 years on type CR2016 (Assuming 3.5 seconds light

operation and 20 seconds alarm operation per day)

Frequent use of the backlight shortens the battery life noted above.

E-25

Speciﬁ cations

Accuracy at normal temperature:

30 seconds a month

Timekeeping: Hour, minutes, seconds, pm (PM), month, day, the day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Alarm: Multi-function* alarm; Hourly Time Signal

* Alarm type: Daily alarm date alarm, 1-month alarm, monthly alarm,

Countdown Timer

Measuring unit: 1 second

Input range: 1 second to 24 hours

Other: Auto-repeat function

Stopwatch

Measuring units: 1/100 second (for the ﬁ rst 60 minutes)

1 second (after 60 minutes)

Measuring capacity: 23:59'59"

Measuring modes: Elapsed time, split time and two ﬁ nishes

E-24

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Auto return features

If you leave a screen with ﬂ ashing digits for two or three minutes without performing

any operation, the watch automatically saves any settings you have made up to that

point and exits the setting screen.

Data and Setting Scrolling

The button is used to scroll through setting screen data on the display. Holding D

down this button during a scroll operation scrolls through the data at high speed.

E-23

To measure times with the stopwatch

Elapsed time

D D D D A

Start Stop Re-start Stop Clear

Split time

D A A D A

Start Split

( displayed)SPL

Split release Stop Clear

Two Finishes

D A D A A

Start Split

First runner

ﬁ nishes.

Display time of ﬁ rst

runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Clear

E-22

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two ﬁ nishes. The range of the stopwatch is 23 hours,

59 minutes, 59 seconds.



x For the ﬁ rst 60 minutes, the display shows minutes,

seconds, and 1/100 second. After 60 minutes, the

display format changes to show hours, minutes, and

seconds.



x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-7).

Minutes

Mode indicator

Current time

Seconds

1/100 second

E-21

To turn auto-repeat on and off

In the Countdown Timer Mode, press 1. . The hours A

digits of the countdown start time will start to ﬂ ash, which

indicates the setting screen.

Press 2. to toggle auto-repeat on ( displayed) BAUTO

and off ( not displayed).AUTO

Note that pressing

xB in the above operation also

turns on the illumination.

When the end of the countdown is reached while auto- x

repeat is on, the alarm sounds, but the countdown

restarts from the beginning without stopping. You can

stop the countdown by pressing and manually D

reset to the start time by pressing .A

The auto-repeat indicator appears in the Countdown x

Timer Mode only.

Auto-repeat on indicator

E-20

To use the countdown timer

Press while in the Countdown Timer Mode to start the countdown timer.D

When the end of the countdown is reached and auto-repeat is turned off, the alarm x

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is automatically reset to its starting value after the alarm stops.

Press

xD D while a countdown operation is in progress to pause it. Press again to

resume the countdown.

To completely stop a countdown operation, ﬁ rst pause it (by pressing

xD), and then

press . This returns the countdown time to its starting value.A

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	Vintage B640WC-5AEF
Gewicht:	49 g
Breedte:	35 mm
Diepte:	9.4 mm
Hoogte:	38.9 mm
Type horloge:	Horloge
Chronograaf:	Nee
Chronometer:	Nee
Type wijzerplaat horloge:	Led-wijzerplaat
Waterdicht:	Ja
Stopwatch:	Ja
Countdown timer:	Ja
Waterbestendig druk:	4.9 ATM
Schokbestendig:	Nee
Alarm functie:	Ja
Agenda:	Ja
Type kalender:	Date, Day, Month
Horlogekast materiaal:	Kunststof
Kleur behuizing:	Goud
Band materiaal:	Roestvrijstaal
Hoofdkleur van band:	Goud
Glas type van horloge:	Acryl
Hoesvorm:	Rond
Hoofdkleur van wijzerplaat:	Zwart
Geslacht:	Vrouw
Levensduur batterij/accu:	3 jaar
Ondersteund aantal accu's/batterijen:	1
Hoofdkleur kast:	Goud
Productontwerp:	Casual