Casio SGW-450H-1A Handleiding

Casio Sporthorloge SGW-450H-1A

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio SGW-450H-1A (8 pagina's) in de categorie Sporthorloge. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Operation Guide 5450

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure barometric pressure, temperature and

altitude. Measured values are then shown on the display. Such features make this

watch useful when hiking, mountain climbing, or when engaging in other such outdoor

activities.

E-2

Warning !

•

The measurement functions built into this watch are not intended for taking

measurements that require professional or industrial precision. Values produced

by this watch should be considered as reasonable representations only.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any

damage or loss suffered by you or any third party arising through the use of

this product or its malfunction.

E-3

About This Manual

• Depending on the model of your watch, display text

appears either as dark ﬁ gures on a light background, or

light ﬁ gures on a dark background. All sample displays

in this manual are shown using dark ﬁ gures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

E-4

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-14) to conﬁ gure

your Home City and daylight saving time settings.

Important!

Proper World Time Mode data depend on correct Home City, time, and date settings

in the Timekeeping Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-17).

The watch is now ready for use.

E-5

Contents

About This Manual …………………………………………………………………… E-3

Things to check before using the watch ………………………………………… E-4

Mode Reference Guide ……………………………………………………………… E-9

Timekeeping ……………………………………………………………………………E-13

Conﬁ guring Home City Settings ……………………………………………………E-14

To conﬁ gure Home City settings ………………………………………………E-14

To change the Daylight Saving Time (summer time) setting ………………E-16

Conﬁ guring Current Time and Date Settings ……………………………………E-17

To change the current time and date settings ………………………………E-18

Hand Home Position Correction ……………………………………………………E-22

To adjust home positions ………………………………………………………E-22

E-6

Barometer/Thermometer ……………………………………………………………E-23

To enter and exit the Barometer/Thermometer Mode ………………………E-23

To calibrate the pressure sensor and the temperature sensor ……………E-28

Altimeter …………………………………………………………………………………E-30

To take an altimeter reading …………………………………………………E-31

To specify a reference altitude value …………………………………………E-34

Specifying Temperature, Barometric Pressure, and Altitude Units …………E-39

To specify temperature, barometric pressure, and altitude units …………E-39

Precautions Concerning Simultaneous Measurement of Altitude and

Temperature ……………………………………………………………………………E-41

Checking the Current Time in a Different Time Zone ……………………………E-42

To enter the World Time Mode ………………………………………………E-42

To view the time in another time zone ………………………………………E-42

To specify standard time or daylight saving time (DST) for a city …………E-43

E-7

Using the Stopwatch …………………………………………………………………E-44

To enter the Stopwatch Mode …………………………………………………E-44

To perform an elapsed time operation ………………………………………E-44

To pause at a split time …………………………………………………………E-44

To measure two ﬁ nishes ………………………………………………………E-45

Using the Countdown Timer …………………………………………………………E-46

To enter the Countdown Timer Mode …………………………………………E-46

To specify the countdown start time …………………………………………E-46

To perform a countdown timer operation ……………………………………E-48

To stop the alarm ………………………………………………………………E-48

Using the Alarm ………………………………………………………………………E-49

To enter the Alarm Mode ………………………………………………………E-49

To set an alarm time ……………………………………………………………E-50

To test the alarm ………………………………………………………………E-51

To turn an alarm and the Hourly Time Signal on and off……………………E-52

To stop the alarm ………………………………………………………………E-52

E-8

Illumination ……………………………………………………………………………E-53

To turn on illumination …………………………………………………………E-53

To change the illumination duration …………………………………………E-53

Button Operation Tone ………………………………………………………………E-55

To turn the button operation tone on and off …………………………………E-55

Troubleshooting ………………………………………………………………………E-57

Speciﬁ cations …………………………………………………………………………E-61

E-9

Mode Reference Guide

Your watch has 7 “modes”. The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current time and date in the Home City

•

Conﬁ gure Home City and daylight saving time (DST) settings

• Conﬁ gure time and date settings

Timekeeping Mode E-13

View the barometric pressure and temperature at your

current location

Barometer/

Thermometer Mode E-23

• View the altitude at your current location

• Determine the altitude differential between two locations

(reference point and current location)

Altimeter Mode E-30

View the current time in one of 48 cities (31 time zones)

around the globe World Time Mode E-42

Use the stopwatch to measure elapsed time Stopwatch Mode E-44

Use the countdown timer

Countdown Timer Mode

E-46

Set an alarm time Alarm Mode E-49

Operation Guide 5450

E-10

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between

modes.

• In any mode (except when a setting screen, with ﬂ ashing digits is on the display),

press B to illuminate the display.

World Time

Mode

Barometer/

Thermometer Mode

Stopwatch Mode

Countdown

Timer Mode

World Time

Mode

Barometer/

Thermometer Mode

Stopwatch Mode

Countdown

Timer Mode

E-11

Alarm Mode Hand Setting Mode

Altimeter Mode

Timekeeping Mode

Alarm Mode Hand Setting Mode

Altimeter Mode

Timekeeping Mode

E-12

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Auto Return Features

• The watch returns to the Timekeeping Mode automatically if you do not perform any

button operation for two or three minutes in the Alarm Mode.

• The watch will return to the Timekeeping Mode automatically if you do not perform

any operation for about one hour after entering the Barometer/Thermometer Mode.

•

If you leave a setting screen with ﬂ ashing digits on the display for two or three minutes

without performing any operation, the watch exits the setting screen automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing

when you last exited the mode appears ﬁ rst.

Scrolling

The B and D buttons are used on the setting screen to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

E-13

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

• In the Timekeeping Mode, the graphic in the center of

the display indicates the passage of seconds.

PM indicator

Day of week

Month Day

Seconds

Graphic

Hour hand

Hour : Minutes

Minute hand

PM indicator

Day of week

Month Day

Seconds

Graphic

Hour hand

Hour : Minutes

Minute hand

E-14

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A until the

currently selected city code (Home City) starts to ﬂ ash.

This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message

SET Hold will appear on the display. Keep A

depressed until SET Hold disappears and the city

code starts to ﬂ ash.

• For details about city codes, see the “City Code Table”

at the back of this manual.

PM indicator

City code

Seconds

Hour : Minutes

PM indicator

City code

Seconds

Hour : Minutes

E-15

2. Press D (East) and B (West) to select the city code

you want to use as your Home City.

• Keep pressing D or B until the city code you want to

select as your Home City appears on the display.

3. Press C to display the DST setting screen.

Press

to toggle between Daylight Saving Time (On)

and Standard Time (

OFF).

• Note that you cannot switch between standard time

and daylight saving time (DST ) while UTC is

selected as your Home City.

After all the settings are the way you want, press

A to return to the Timekeeping Mode.

• The indicator appears to indicate that Daylight Saving Time is turned on.DST

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current

time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

Setting

DST indicator

Setting

DST indicator

E-16

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A until the

currently selected city code (Home City) starts to ﬂ ash.

This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message

SET Hold will appear on the display. Keep A

depressed until SET Hold disappears and the city

code starts to ﬂ ash.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (

On)

and Standard Time (

OFF).

4. After all the settings are the way you want, press

A to

return to the Timekeeping Mode.

• The DST indicator appears to indicate that Daylight

Saving Time is turned on.

Setting

DST indicator

Setting

DST indicator

E-17

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the current time and date settings if they

are off.

Changing the digital Home City data should cause the analog time setting to change

accordingly. If the analog time does not indicate the digital time, check the home

positions of the hands and make adjustments if necessary (page E-22).

E-18

To change the current time and date settings

1. In the Timekeeping Mode, hold down A until the

currently selected city code (Home City) starts to ﬂ ash.

This is the city code setting screen.

• Before the city code starts to ﬂ ash, the message

SET Hold will appear on the display. Keep A

depressed until SET Hold disappears and the city

code starts to ﬂ ash.

2. Use D and B to select the city code you want.

• Select your Home City code before changing any

other setting.

• For full information on city codes, see the “City Code

Table” at the back of this manual.

City code

PM indicator

Seconds

Hour : Minutes

City code

PM indicator

Seconds

Hour : Minutes

E-19

Press C to move the ﬂ ashing in the sequence shown below to select the other settings.

Barometer

unit

Temperature

unit

Illumination

Duration

Button Operation

Tone On/Off Day

City

Code DST

Altitude

unit

12/24-Hour

Format Seconds Hour Minute Year Month

• The following steps explain how to conﬁ gure timekeeping settings only.

4. When the timekeeping setting you want to change is ﬂ ashing, use B and/or D to

change it as described below.

Screen To do this: Do this:

Change the city code Use D

(East) and

B (West).

Toggle between Daylight Saving Time (

On)

and Standard Time (

OFF). Press D.

Operation Guide 5450

E-20

Screen To do this: Do this:

Toggle between 12-hour (

12H) and 24-hour

(24H) timekeeping. Press D.

Reset the seconds to

00 Press D.

Change the hour or minute Use D (+) and B

(–).

Change the year, month, or day

5. Press A to exit the setting screen.

E-21

Note

• For information about selecting a Home City and conﬁ guring the DST setting, see

“Conﬁ guring Home City Settings” (page E-14).

• While 12-hour format is selected for timekeeping, a P (PM) indicator will appear for

times from noon to 11:59 p.m. No indicator appears for times from midnight to

11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any

(PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s battery replaced.

E-22

Hand Home Position Correction

The hour and minute hands of the watch can be thrown off by exposure to strong

magnetism or impact. The watch is designed to correct the hour and minute hand

positions manually.

• All of the operations in this section are performed in the Hand Setting Mode, which

you enter by pressing C (page E-11).

To adjust home positions

1. In the Hand Setting Mode, hold down A for about two

seconds until 0:00 appears on the display.

• This is the home position adjustment mode.

2. Check the positions of the hour and minute hands.

• The hands are in the correct home positions if they are

pointed at 12 o’clock. If they aren’t, use

D (clockwise)

and B (counterclockwise) to adjust their positions.

3. Press A to exit the setting screen.

• This will cause the hour and minute hands to move to

the current Timekeeping Mode time.

Hour and minute hands

Correct hour and

minute hand positions

Hour and minute hands

Correct hour and

minute hand positions

E-23

Barometer/Thermometer

This watch uses a pressure sensor to measure air pressure (barometric pressure) and

a temperature sensor to measure temperature.

To enter and exit the Barometer/Thermometer Mode

1. While in the Timekeeping Mode, press C to enter the

Barometer/Thermometer Mode.

• BARO will appear on the display, indicating

that barometric pressure and temperature

measurements are in progress. The measurement

results will appear on the display after about ﬁ ve

seconds.

• After you press C, the watch will take readings every

ﬁ ve seconds for the ﬁ rst three minutes, and then

every two minutes after that.

Temperature

Current time

Barometric

pressure

Pressure

differential

level indicator

Temperature

Current time

Barometric

pressure

Pressure

differential

level indicator

E-24

2. Press C ﬁ ve times to return to the Timekeeping Mode.

•

The watch will return to the Timekeeping Mode automatically if you do not perform

any operation for about one hour after entering the Barometer/Thermometer Mode.

Barometric Pressure

• Barometric pressure is displayed in units of 1 hPa (or 0.05 inHg).

•

The displayed barometric pressure value changes to

- - - if a measured barometric

pressure falls outside the range of 260 hPa to 1,100 hPa (7.65 inHg to 32.45 inHg).

The barometric pressure value will reappear as soon as the measured barometric

pressure is within the allowable range.

Temperature

• Temperature is displayed in units of 0.1°C (or 0.2°F).

• The displayed temperature value changes to

--.- °C (or °F) if a measured

temperature falls outside the range of –10.0°C to 60.0°C (14.0°F to 140.0°F). The

temperature value will reappear as soon as the measured temperature is within the

allowable range.

E-25

Display Units

You can select either hectopascals (hPa) or inchesHg (inHg) as the display unit for the

measured barometric pressure, and Celsius (°C) or Fahrenheit (°F) as the display unit

for the measured temperature value. See “To specify temperature, barometric

pressure, and altitude units” (page E-39).

Pressure Differential Level Indicator

This indicator shows the relative difference between the

most recent barometric pressure reading and the current

barometric pressure value displayed in the Barometer/

Thermometer Mode (page E-23).

Pressure

differential level

indicator

Pressure

differential level

indicator

E-26

Interpreting Barometric Pressure Differential Levels

Pressure differential is indicated in the range of ±5 hPa, in 1-hPa units.

If the level indicator is here: It means this:

Plus (+) side Pressure is rising and weather will tend to improve.

Minus (–) side Pressure is falling and weather will tend to deteriorate.

• The nearby screen shot, for example, shows the level indicator when the calculated

pressure differential is approximately –3 hPa (approximately –0.09 inHg).

−0.15

0.15

inHg valueshPa values

Minus (–) side

Current pressure less than most

recent measured pressure

Plus (+) side

Current pressure greater than

most recent measured pressure

E-27

• Barometric pressure is calculated and displayed using hPa as the standard. The

barometric pressure differential also can be read in inHg units as shown in the

illustration (1 hPa = 0.03 inHg).

Pressure Sensor and Temperature Sensor Calibration

The pressure sensor and temperature sensor built into the watch are calibrated at the

factory and normally require no further adjustment. If you notice serious errors in the

pressure readings and temperature readings produced by the watch, you can calibrate

a sensor to the reading of another device to correct the errors.

Important!

• Incorrectly calibrating the temperature sensor can result in incorrect readings.

Carefully read the following before doing anything.

–

Compare the readings produced by the watch with those of another reliable and

accurate thermometer.

– If adjustment is required, remove the watch from your wrist and wait for 20 or 30

minutes to give the temperature of the watch time to stabilize.

E-28

To calibrate the pressure sensor and the temperature sensor

1.Take a reading with another measurement device to

determine the exact current barometric pressure or

temperature.

2. With the watch in the Timekeeping Mode, press C to

enter the Barometer/Thermometer Mode.

3. Hold down A until the current temperature value starts

to ﬂ ash on the display. This is the setting screen.

• Before the temperature value starts to ﬂ ash, the

message SET Hold will appear on the display.

Keep A depressed until SET Hold disappears.

4. Press C to move the ﬂ ashing between the temperature

value and barometric pressure value, to select the one

you want to calibrate.

E-29

Use D (+) and B (–) to adjust the calibration value in the units shown below.

Temperature 0.1°C (0.2°F)

Barometric Pressure 1 hPa (0.05 inHg)

• To return the currently ﬂ ashing value to its initial factory default setting, press

and

D at the same time. will appear at the ﬂ ashing location for about one OFF

second, followed by the initial default value.

6. Press A to return to the Barometer/Thermometer Mode screen.

Barometer and Thermometer Precautions

• The pressure sensor built into this watch measures changes in air pressure, which

you can then apply to your own weather predictions. It is not intended for use as a

precision instrument in ofﬁ cial weather prediction or reporting applications.

• Sudden temperature changes can affect pressure sensor readings.

• Temperature measurements are affected by your body temperature (while you are

wearing the watch), direct sunlight, and moisture. To achieve a more accurate

temperature measurement, remove the watch from your wrist, place it in a well

ventilated location out of direct sunlight, and wipe all moisture from the case. It

takes approximately 20 to 30 minutes for the case of the watch to reach the actual

surrounding temperature.

Product specificaties

Merk:	Casio
Categorie:	Sporthorloge
Model:	SGW-450H-1A
Kleur van het product:	Zwart
Timer:	24 h
Gewicht:	51 g
Waterdicht:	Ja
Stopwatch:	Ja
Waterbestendig diepte:	100 m
Wereldklok functie:	Ja
Agenda:	Ja
Klokmodus:	12/24 uur
Nauwkeurigheid:	30 sec/maand
Horlogekast materiaal:	Aluminium, Resin
Band materiaal:	Kunststof
Barometer:	Ja
Hoogtemeter:	Ja
Thermometer:	Ja
Afmetingen (B x D x H):	51.9 x 14.9 x 50.8 mm
Type batterij:	CR2016