Casio Radio Controlled WV-200E-1AVEF Handleiding

Casio Horloge Radio Controlled WV-200E-1AVEF

Lees hieronder de đź“– handleiding in het Nederlandse voor Casio Radio Controlled WV-200E-1AVEF (17 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
Operation Guide 3139/3456
E-9
x
When using the watch outside the areas covered by the time signal transmitters,
you will have to adjust the current time setting manually as required. See
“Timekeeping” (page E-38) for more information about manual time settings.
x
The U.S. time calibration signal can be picked up by the watch while in North
America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
E-8
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and
updates its time setting accordingly.
x
Supported time calibration signals: Germany
(Mainflingen), England (Anthorn), United States (Fort
Collins), Japan.
x
See the information under “Signal Reception
Troubleshooting” (page E-27) if you experience problems
with time calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
x
The first thing you should do after purchasing this
watch is to specify your Home City (the city where you
normally will use the watch). For more information, see
“To specify your Home City” (page E-10).
Home Time
(Hour : Minutes Seconds)
PM indicator DST indicator
Month – Day
Day of week
Year
E-7
C C
Countdown Timer
Mode
Stopwatch Mode Alarm Mode
C
E-6
General Guide
x Press to change from mode to mode.C
x
In any mode (except when a setting screen is on the display), press to illuminate B
the display.
C C
Timekeeping Mode World Time Mode
E-5
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-37
To turn the daily alarm and the Hourly Time Signal on and off . . . . . . . . . . . .E-37
To set the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-40
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . .E-45
To turn off Auto Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46
To turn on Auto Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-46
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . .E-47
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To specify your Home City . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-10
To perform manual receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-24
To turn auto receive on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-25
To display the Last Signal screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-26
To view the time in another city . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-29
To toggle a city code time between Standard Time and
Daylight Saving Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-30
To set the countdown start time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-31
To use the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-32
To measure times with the stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34
To set the alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-36
E-3
Contents
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-6
Radio-controlled Atomic Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-8
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-29
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-31
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-33
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-35
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-38
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-46
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-54
Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-56
User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-66
E-2
About This Manual
x
Button operations are indicated using the letters shown
in the illustration.
x
Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information can
be found in the “Reference” section.
x
To ensure that this watch provides you with the years of
service for which it is designed, carefully read and follow
the instructions in this manual, especially the information
under “Operating Precautions” and “User Maintenance”.
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of
your purchase, be sure to read this manual carefully.
x
Be sure to keep all user documentation handy for future reference.
Caution!
Your watch is shipped with its Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled
while Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
MA1610-EA © 2016 CASIO COMPUTER CO., LTD.
Operation Guide 3139/3456
E-19
Your Home City Auto Receive Start Times
1 2 3 4 5 6
HNL, ANC,
YVR, LAX, YEA,
DEN, MEX,
YWG, CHI, MIA,
YTO, NYC,
YHZ, YYT
Standard Time
Daylight Saving
Time
Midnight 1:00 am 2:00 am 3:00 am 4:00 am 5:00 am
LIS, LON
Standard Time 1:00 am 2:00 am 3:00 am 4:00 am 5:00 am Midnight
*
Daylight Saving
Time 2:00 am 3:00 am 4:00 am 5:00 am Midnight
*
1:00 am
*
MAD, PAR,
ROM, BER, STO
Standard Time 2:00 am 3:00 am 4:00 am 5:00 am Midnight
*
1:00 am
*
Daylight Saving
Time 3:00 am 4:00 am 5:00 am Midnight
*
1:00 am
*
2:00 am
*
E-18
x
Signal reception may not be possible at the distances noted below during certain
times of the year or day. Radio interference may also cause problems with
reception.
Mainflingen (Germany) or Anthorn (England) transmitters: 500 kilometers (310miles)
Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)
Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles)
x
Even when the watch is within the reception range of a transmitter, signal reception
may be impossible at times due to the effects of geographic contours, structures,
weather, the season of the year, the time of day, radio interference, etc. Note that
the signal becomes weaker at distances of approximately 500 kilometers from the
transmitter, which means that the influence of the conditions listed above becomes
even greater.
About Auto Receive
The watch receives the time calibration signal automatically up to six times a day.
When any auto receive is successful, the remaining auto receive operations are not
performed. The reception schedule (calibration times) depends on your currently
selected Home City, and whether standard time or Daylight Saving Time is selected
for your Home City.
E-17
Approximate Reception Ranges
U.K. and German Signals U.S. Signal
Japan Signal
Anthorn 1,500 kilometers
Fukushima
500 kilometers
1,000 kilometers
Fukuoka/Saga
Mainflingen
500 kilometers
The Anthorn signal
is receivable within
this area
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
E-16
x
The time calibration signal the watch will attempt to pick up depends on its current
Home City code setting as shown below. If you use the watch in Japan or Europe
(each of which has two different transmitter locations), it will try to receive the time
calibration signal from one of the transmitters in your current location. If it cannot
receive the signal, it will then try to receive the time calibration signal from the other
transmitter.
Home City Codes and Transmitters
Home City Code Transmitter Frequency
LIS, LON, MAD, PAR, ROM, BER, STO,
ATH, MOW*
Anthorn (England)
Mainflingen (Germany)
60.0 kHz
77.5 kHz
HKG*, BJS*, TPE, SEL, TYO Fukushima (Japan)
Fukuoka/Saga (Japan)
40.0 kHz
60.0 kHz
HNL*, ANC*, YVR, LAX, YEA, DEN, MEX,
YWG, CHI, MIA, YTO, NYC, YHZ, YYT
Fort Collins, Colorado
(the United States) 60.0 kHz
*
The areas covered by the , , , , and city codes are quite HNL ANC MOW HKG BJS
far from the time calibration signal transmitters, and so certain conditions may
cause problems with signal reception.
E-15
x
Proper signal reception can be difficult or even impossible under the conditions
listed below.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
office
equipment,
or a mobile
phone
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near high-
tension
power lines
Among
or behind
mountains
x
Signal reception normally is better at night than during the day.
x
Time calibration signal reception takes from two to seven minutes, but in some
cases it can take as long as 14 minutes. Take care that you do not perform any
button operations or move the watch during this time.
E-14
Important!
x
When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 o’clock side facing towards a window.
This watch is designed to receive a time calibration signal late at night. Because of
this, you should place the watch near a window as shown in the illustration when
you take it off at night. Make sure there are no metal objects nearby.
12 o’clock
or
x Make sure the watch is facing the right way.
E-13
x
If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting (page E-45).
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
x Auto Receive
With auto receive, the watch receives the time calibration signal automatically up
to six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see “About Auto Receive”
(page E-18).
x Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive” (page E-24).
E-12
Important!
x
Normally, your watch should show the correct time as soon as you select your
Home City code. If it does not, it should adjust automatically after the next auto
receive operation (in the middle of the night). You can also perform manual receive
(page E-24) or you can set the time manually (page E-40).
x
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see “Home
City Codes and Transmitters” (page E-16).
x
Under factory default settings, auto receive is turned off for all of the following city
codes: (Honolulu), (Anchorage), (Moscow), (Hong Kong), and HNL ANC MOW HKG
BJS (Beijing). For details about turning on auto receive for these city codes, see “To
turn auto receive on and off” on page E-25.
x
You can disable time signal reception, if you want. See “To turn auto receive on
and off” on page E-25 for more information.
x
See the maps under “Approximate Reception Ranges” (page E-17) for information
about the reception ranges of the watch.
E-11
German/U.K. Signal Japan Signal U.S. Signal
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
LIS ATH HKG HNL YWGLisbon Athens Hong Kong Honolulu Winnipeg
LON MOW BJS ANC CHILondon Moscow Beijing Anchorage Chicago
MAD TPE YVR MIAMadrid Taipei Vancouver Miami
PAR SEL LAX YTOParis Seoul Los Angeles Toronto
ROM TYO YEA NYCRome Tokyo Edmonton New York
BER DEN YHZBerlin Denver Halifax
STO MEX YYTStockholm Mexico City St. Johns
3. Press twice to exit the setting screen.A
E-10
To specify your Home City
1. In the Timekeeping Mode, hold down until the city A
code starts to flash, which indicates the setting screen.
2. Press (east) and (west) to select the city code you D B
want to use as your Home City.
x
Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
City code
Operation Guide 3139/3456
E-29
World Time
The World Time Mode shows you the current time in 48
cities (29 time zones) around the world.
x
If the current time shown for a city is wrong, check
your Home City time settings and make the necessary
changes (page E-10).
x
All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-6).
To view the time in another city
While in the World Time Mode, press to scroll D
eastward through the city codes (time zones).
x
For full information on city codes, see the “City Code
Table” at the back of this manual.
Timekeeping Mode time
Current time in
selected city
City code
UTC offset
E-28
Problem Probable Cause What you should do
Auto receive is
turned on, but the
Level 3 receiving
indicator does
not appear on the
display.
x Even if receive is successful, the Level 3
receiving indicator disappears every day
when the first auto receive operation of
the day is performed.
x Time data (hour, minutes, seconds) only
was received during the last receive
operation. The Level 3 receiving indicator
appears only when time data and date
data (year, month, day) are both received.
x Perform manual signal
receive or wait until the
next auto signal receive
operation is performed.
x Check to make sure the
watch is in a location
where it can receive the
signal (page E-14).
Time setting
is incorrect
following signal
reception.
x If the time is one hour off, the DST setting
may be incorrect.
x The Home City code setting is not correct
for the area where you are using the
watch.
x Change the DST setting to
Auto DST (page E-45).
x Select the correct Home
City code (page E-10).
x
For further information, see “Important!” (page E-14) and “Radio-controlled Atomic
Timekeeping Precautions” (page E-49).
E-27
Signal Reception Troubleshooting
Check the following points whenever you experience problems with calibration signal
reception.
Problem Probable Cause What you should do
Cannot perform
manual receive.
x
The watch is not in the Timekeeping Mode.
x
Your current Home City is not one of the
following city codes:
HNL ANC YVR LAX YEA DEN MEX, , , , , , ,
YWG MIA, , CHI , , , , , YTO NYC YHZ YYT
LIS LON MAD PAR ROM BER STO, , , , , , ,
ATH HKG BJS TPE SEL, MOW, , , , , and
TYO.
x
The countdown timer is running.
x
Enter the Timekeeping
Mode and try again
(page E-24).
x
Select one of the cities to
the left as your Home City
(page E-10).
x
Stop the countdown timer
(page E-32) and try again.
Auto receive is
turned on, but the
Level 3 receiving
indicator does
not appear on the
display.
x
You changed the time setting manually.
x
The watch was not in the Timekeeping or
World Time Mode, or you performed some
button operation during the auto receive
operation.
x
Perform manual signal
receive or wait until the
next auto signal receive
operation is performed.
E-26
To display the Last Signal screen
In the Timekeeping Mode, press to display the Last Signal screen (indicated by D
). The Last Signal screen shows the date and time of the last successful time
calibration signal reception.
D
Home Time
(Hour : Minutes Seconds)
PM indicator
Receive timeDST indicator
Month – Day
Day of week
Current Time and Date Screen Last Signal Screen
Receive dateYear
E-25
x
Calibration signal reception is disabled while a countdown timer operation is in
progress.
To turn auto receive on and off
1. In the Timekeeping Mode, press to display the Last D
Signal screen (page E-26).
2. Hold down until the receiving indicator and current A
auto receive setting ( or ) start to flash.
This is the setting screen.
x
Note that the setting screen will not appear if the
currently selected Home City is one that does not
support time calibration reception.
3. Press to toggle auto receive on (D) and off
( ).
4. Press to exit the setting screen.A
x
For information about city codes that support signal receive, see “To specify your
Home City” (page E-10).
On/Off Status
E-24
To perform manual receive
1. Place the watch on a stable surface so its top
(12o’clock side) is facing towards a window (page E-14).
2. In the Timekeeping Mode, hold down for about two D
seconds until appears on the display.RC!
x
Time calibration signal reception takes from two to seven
minutes, but in some cases it can take as long as 14
minutes. Take care that you do not perform any button
operations or move the watch during this time.
x
After signal reception is complete, the display of the
watch changes to the Last Signal screen (page E-26).
Note
x
To interrupt a receive operation and return to the Timekeeping Mode, press .D
x
If the receive operation is unsuccessful, the message appears on
the display for about one or two minutes. After that, the watch returns to the
Timekeeping Mode.
x You can also change from the Last Signal or screen to the normal
timekeeping screen by pressing .D
Receiving indicator
E-23
x
Following reception of the time calibration signal and calibration of the watch’s time
setting, the Level 3 receiving indicator will remain on the display in all modes. The
Level 3 receiving indicator will not be displayed if signal reception was unsuccessful
or after you adjust the current time setting manually.
x
The Level 3 receiving indicator is displayed only when the watch is able to receive
both time and date data successfully. It does not appear when only time data is
received.
x
The Level 3 receiving indicator indicates that at least one of the auto calibration
signal receive operations was successful. Note, however, that the Level 3 receiving
indicator is cleared from the display when the first auto receive operation of the day
is performed.
E-22
About the Receiving Indicator
The receiving indicator shows the strength of the calibration signal being received.
For best reception, be sure to keep the watch in a location where signal strength is
strongest.
Receiving indicator
Weak
(Level 0)
Strong
(Level 3)
x
Even in an area where signal strength is strong, it takes about 10 seconds for signal
reception to stabilize enough for the receiving indicator to indicate signal strength.
x
Use the receiving indicator as a guide for checking signal strength and for finding
the best location for the watch during signal receive operations.
E-21
Note
x
When a calibration time is reached, the watch will receive the calibration signal
only if it is in either the Timekeeping Mode or World Time Mode. Reception is not
performed if a calibration time is reached while you are configuring settings.
x
Auto receive of the calibration signal is designed to be performed early in the
morning, while you sleep (provided that the Timekeeping Mode time is set
correctly). Before going to bed for the night, remove the watch from your wrist, and
put it in a location where it can receive the signal easily.
x
The watch receives the calibration signal for two to seven minutes everyday when
the time in the Timekeeping Mode reaches each of the calibration times. Avoid
performing any button operation within seven minutes before or after any one of the
calibration times. Doing so can interfere with correct calibration.
x
Remember that reception of the calibration signal depends on the current time
in the Timekeeping Mode. The receive operation will be performed whenever the
display shows any one of the calibration times, regardless of whether or not the
displayed time actually is the correct time.
x
Calibration signal reception is disabled while a countdown timer operation is in
progress.
E-20
Your Home City Auto Receive Start Times
1 2 3 4 5 6
ATH
Standard Time 3:00 am 4:00 am 5:00 am Midnight
*
1:00 am
*
2:00 am
*
Daylight
Saving Time 4:00 am 5:00 am Midnight
*
1:00 am
*
2:00 am
*
3:00 am
*
MOW
Standard Time 4:00 am 5:00 am Midnight
*
1:00 am
*
2:00 am
*
3:00 am
*
Daylight
Saving Time 5:00 am Midnight
*
1:00 am
*
2:00 am
*
3:00 am
*
4:00 am
*
HKG, BJS, TPE,
SEL, TYO Standard Time Midnight 1:00 am 2:00 am 3:00 am 4:00 am 5:00 am
* Next day


Product specificaties

Merk: Casio
Categorie: Horloge
Model: Radio Controlled WV-200E-1AVEF

Heb je hulp nodig?

Als je hulp nodig hebt met Casio Radio Controlled WV-200E-1AVEF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Casio

Handleiding Horloge

Nieuwste handleidingen voor Horloge