Casio LIW-M1100DB-1AER Handleiding

Casio Horloge LIW-M1100DB-1AER

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio LIW-M1100DB-1AER (6 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Operation Guide 5073

MA0905-EA

Congratulations upon your selection of this CASIO watch.

This watch does not have a city code that corresponds to the UTC offset of –3.5

hours. Because of this, the radio-controlled atomic timekeeping function will not

display the correct time for Newfoundland, Canada.

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any

damage or loss suffered by you or any third party arising through the use of this

product or its malfunction.

About This Manual

Button operations are indicated using the letters A

through shown in the illustration.D

Hand Functions

Regular timekeeping

z Hour Hand

x Second Hand

c Minute Hand

v Day of the Week Hand

b Day

World Time

n World Time Hour Hand: Indicates the current time in the World Time City in

24-hour format.

m World Time Minute Hand

This User’s Guide uses numbers shown above to identify watch hands and indicators.

Things to check before using the watch

1. Hold down for about two seconds to enter regular timekeeping, and then C

observe the movement of the

x .Second Hand

Is the moving smoothly at one-second intervals?xSecond Hand

Is the moving at xSecond Hand

two-second intervals or is it stopped

completely?

Go to step 2.

The watch is charged sufﬁciently.

For details about charging, see

“Charging the Watch”.

Power is low. Charge the watch by placing

it in a location where it is exposed to light.

For details, see “Charging the Watch”.

YES

2. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁgure Home City settings” to conﬁgure your Home

City and daylight saving time settings.

Important!

Proper time calibration signal reception and World Time settings depend on correct

Home City, Home Time, and Home Date settings. Make sure you conﬁgure these

settings correctly.

3. Set the current time.

To set the time using a time calibration signal •

See “To get ready for a receive operation”.

To set the time manually •

See “Conﬁguring Current Time and Date Settings Manually”.

The watch is now ready for use.

For details about the watch’s radio controlled timekeeping feature, see “Radio

Controlled Atomic Timekeeping”.

Charging the Watch

The face of the watch is a solar cell that generates power from light. The generated

power charges a built-in rechargeable battery, which powers watch operations. The

watch charges whenever it is exposed to light.

Charging Guide

Whenever you are not

wearing the watch, leave

it in a location where it is

exposed to light.

Best charging •

performance is achieved

by exposing the watch to

light that is as strong as

possible.

When wearing the watch,

make sure that its face is

not blocked from light by the

sleeve of your clothing.

The watch may enter a •

sleep state if its face is

blocked by your sleeve

even only partially.

Warning!

Leaving the watch in bright light for charging can cause it to become quite hot.

Take care when handling the watch to avoid burn injury. The watch can become

particularly hot when exposed to the following conditions for long periods.

On the dashboard of a car parked in direct sunlight •

Too close to an incandescent lamp •

Under direct sunlight •

Important!

Keep the watch in an area normally exposed to bright light when storing it for long •

periods. This helps to ensure that power does not run down.

Storing the watch for long periods in an area where there is no light or wearing it in •

such a way that it is blocked from exposure to light can cause power to run down.

Make sure that the watch is exposed to bright light whenever possible.

B +

56 *

Power Levels

B +

@ *

Moves at two-second

intervals.

You can get an idea of the watch’s power level by

observing the movement of the

x .Second Hand

If the •x is moving normally at one-second Second Hand

intervals, power is at Level 1.

If the •x is moving at two-second intervals, Second Hand

power is at Level 2, which is quite low. Expose the watch

to light as soon as possible so it can charge.

Level Hand Movement Function Status

1 Normal All functions enabled

x moves at two-second Second Hand

intervals.

b changes to (home position).Day 1

Time calibration signal reception

disabled

x stopped.Second Hand

z c and Hour Hand stopped Minute Hand

at 12 o’clock.

All functions disabled

When power drops to Level 3, all functions will be disabled but the watch will •

continue to keep time internally for about one week. If you recharge the battery

sufﬁciently during this period, the analog hands will move automatically to the

correct setting and regular timekeeping will resume. After one week, all settings

(including timekeeping) will be cleared. Recharging the battery will reset all settings

to their initial factory defaults.

Charging Times

Exposure Level (Brightness)

Daily

Operation

Level Change *2

Level 3 Level 2 Level 1

Outdoor sunlight (50,000 lux) 8 min. 2 hours 24 hours

Window sunlight (10,000 lux) 30 min. 6 hours 89 hours

Window sunlight on cloudy day

(5,000 lux) 48 min. 9 hours 145 hours

Indoor ﬂuorescent lighting (500 lux) 8 hours 98 hours – – –

1 Approximate exposure each day to generate power for normal daily operation *

2 Approximate exposure to take power up one level *

The above times are for reference only. Actual times depend on lighting conditions. •

For details about the operating time and daily operating conditions, see the “Power •

Supply” section of the Speciﬁcations.

Power Saving

Power Saving enters a sleep state automatically whenever the watch is left for a

certain period in an area where it is dark. The table below shows how watch functions

are affected by Power Saving.

There actually are two sleep state levels: “second hand sleep” and “function sleep”. •

Elapsed Time in Dark Operation

60 to 70 minutes

(second hand sleep)

x only stopped at 12 o’clock, all other Second Hand

functions enabled

6 or 7 days (function sleep) All functions, including analog timekeeping, disabled •

Internal timekeeping maintained •

The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch •

is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep

state.

To recover from the sleep state

Move the watch to a well-lit area or press any button.

Radio Controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.

However, when using the watch outside of areas covered by time calibration signals,

you will have to adjust the settings manually as required. See “Conﬁguring Current

Time and Date Settings Manually” for more information.

This section explains how the watch updates its time settings when the city code

selected as the Home City is in Japan, North America, Europe, or China, and is one

that supports time calibration signal reception.

If your Home City Code setting

is this:

The watch can receive the signal from the

transmitter located here:

LON, PAR, ATH Anthorn (England), Mainﬂingen (Germany)

HKG Shangqiu City (China)

TYO Fukushima (Japan), Fukuoka/Saga (Japan)

HNL, ANC, LAX, DEN, CHI, NYC Fort Collins, Colorado (United States)

Important!

The areas covered by •HNL ANC and are quite far from the calibration signal

transmitters, so certain conditions may cause reception problems.

When •HNL HKG or is selected as the Home City, only the time and date are

adjusted according to the time calibration signal. You need to switch manually

between standard time and daylight saving time (DST) if required. See “To toggle

the Home City time between standard time and daylight saving time” for information

about how to do this.

Operation Guide 5073

Approximate Reception Ranges

UK and German Signals

Anthorn

500 kilometers

1,500 kilometers

Mainﬂingen

The Anthorn signal is receivable

within this area.

North American Signal

2,000 miles

(3,000 kilometers)

600 miles

(1,000 kilometers)

Fort Collins

Japanese Signal

Fukushima

500 kilometers

1,000 kilometers

Fukuoka/Saga

Chinese Signal

1,500 kilometers

Changchun500 kilometers

Beijing

Shangqiu

Shanghai

Chengdu

Hong Kong

Even when the watch is within range of a transmitter, signal reception may be •

impossible due to the effects of geographic contours, structures, weather, the time

of year, the time of day, radio interference, etc. The signal becomes weaker at

distances of approximately 500 kilometers, which means that the inﬂuence of the

above conditions becomes even greater.

Signal reception may not be possible at the distances noted below during certain •

times of the year or day. Radio interference may also cause problems with

reception.

Mainﬂingen (Germany) or Anthorn (England) transmitters: 500 kilometers −

(310 miles)

Fort Collins (United States) transmitter: 600 miles (1,000 kilometers) −

Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles) −

Shangqiu (China) transmitter: 500 kilometers (310 miles) −

As of January 2009, China does not use Daylight Saving Time (DST). If China does •

go to the Daylight Saving Time system in the future, some functions of this watch

may no longer operate correctly.

To get ready for a receive operation

Check to make sure the watch is in the regular timekeeping mode. If it isn’t, hold 1.

down for about two seconds to enter the regular timekeeping mode.C

The antenna of this watch is located on its 6 o’clock side. Position the watch with 2.

6 o’clock facing towards a window as shown in the nearby illustration. Make sure

there are no metal objects nearby.

6 o’clock

Signal reception normally is better •

at night.

The receive operation takes from •

two to seven minutes, but in some

cases it can take as long as 14

minutes. Take care that you do not

perform any button operation or

move the watch during this time.

Signal reception may be difﬁcult or even impossible under the conditions •

described below.

Inside or

among

buildings

Inside a

vehicle

Near

household

appliances,

ofﬁce

equipment,

or a mobile

phone

Near a

construction

site, airport,

or other

sources of

electrical

noise

Near

high-tension

power lines

Among

or behind

mountains

What you should do next depends on whether you are using Auto Receive or 3.

Manual Receive.

Auto Receive: Leave the watch over night in the location you selected in step 2. •

See “Auto Receive” for details.

Manual Receive: Perform the operation under “To perform manual receive”. •

Auto Receive

With Auto Receive, the watch performs the receive operation each day •

automatically up to six times (up to ﬁve times for the Chinese calibration signal)

between the hours of midnight and 5 a.m. (according to the Home City time). When

any receive operation is successful, none of the other receive operations for that

day are performed.

The receive operation is not performed if a calibration time is reached while you are •

conﬁguring settings.

To perform manual receive

In the regular timekeeping mode, keep 1. depressed (for about two seconds) as A

the x goes through the following sequence.Second Hand

Moves to the last signal reception result ( •Y N READY R or ), then to (or for some

models).

The 2. x indicates the operations the watch is currently performing.Second Hand

When the xSecond

Hand is pointed here: It means this:

READY (R) Watch is setting up for reception.

WORK (W) Reception is in progress.

YES (Y) Reception was completed

successfully.

NO (N) Reception failed for some reason.

If signal reception is unstable, the •x may Second Hand

move between ( ) and ( ).WORK W READY R

The receive operation is complete when the 3. x Second

Hand moves to ( ) or ( ) for about ﬁve YES Y NO N

seconds, and then resumes regular timekeeping.

When the receive operation is successful, the watch •

adjusts the time setting accordingly. It does not adjust

the setting if the operation failed.

Note

To interrupt a receive operation and return to the regular •

timekeeping, press any button.

If the •x is pointing to ( ) or ( ), Second Hand YES Y NO N

you can return to regular timekeeping by pressing .A

To check the result of the latest receive operation

In the regular timekeeping mode, press .A

The •x will move to ( ) for ﬁve Second Hand YES Y

seconds if the latest receive operation was successful,

or ( ) if it was not. After that, regular timekeeping NO N

will resume.

Note

The •x will indicate ( ) if you have Second Hand NO N

adjusted the time or date setting manually since the

latest receive operation.

If the •x is pointing to ( ) or ( ), Second Hand YES Y NO N

you can return to regular timekeeping by pressing .A

Radio-controlled Atomic Timekeeping Precautions

Strong electrostatic charge can result in the wrong time setting. •

Even if a receive operation is successful, certain conditions can cause the time •

setting to be off by up to one second.

The watch is designed to update the date and day of the week automatically for •

the period January 1, 2000 to December 31, 2099. Updating of the date by signal

reception will no longer be performed starting from January 1, 2100.

If you are in an area where signal reception is not possible, the watch keeps time •

with the precision noted in “Speciﬁcations”.

The receive operation is disabled under any of the following conditions. •

While power is at Level 2 or lower −

When the watch is in the function sleep state (“Power Saving”) −

Mode Reference Guide

Your watch has two timekeeping modes, and a number of setting modes. The

timekeeping mode you should select depends on what you want to do.

To do this: Enter this mode:

View the current time in your Home City and in one of 29 •

other cities around the globe

View the current date in the Home City •

Conﬁgure Home City and daylight saving time (DST) •

settings

Perform a time calibration receive operation •

Conﬁgure time and date settings manually •

Regular timekeeping mode

Select one of 29 cities (time zones) around the world and •

view the current time there.

Select daylight saving/summer time (DST) or standard time •

for a time zone

World Time setting mode

Selecting a Mode

With this watch, everything starts from the regular timekeeping mode.

To determine the watch’s current mode

Check the position of the

v as Day of the Week Hand

shown under “To select a mode”.

To return to the regular timekeeping mode from

another mode

Hold down for about two seconds until the Cx Second

Hand stops and then starts moving again.

Operation Guide 5073

To select a mode

Starting from the regular timekeeping mode, press to toggle between the regular C

timekeeping mode and the World Time setting mode. You can tell what mode is

currently selected by checking the , as described below.vDay of the Week Hand

Regular timekeeping mode

The hand indicates the day of the

week ( , , , , , , ).Su Mo Tu We Th Fr Sa

World Time setting mode

In the World Time setting mode, the

short end of the hand indicates whether

the time for the currently selected

World Time City is standard time ( ) STD

or daylight saving/summer time ( ).DST

> >

Timekeeping

Hand Functions

Regular timekeeping

z Hour Hand

x Second Hand

c Minute Hand

v Day of the Week Hand

b Day

World Time

n World Time Hour Hand: Indicates the current time in

the World Time City in 24-hour

format.

m World Time Minute Hand

To return to regular timekeeping from any other mode or function, hold down •C for

about two seconds.

Conﬁguring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To conﬁgure Home City settings

Note

This watch does not have a city code that corresponds •

to Newfoundland.

In the regular timekeeping mode, keep 1. depressed A

(for about ﬁve seconds) as the x goes Second Hand

through the following sequence.

Moves to the last signal reception result ( •Y N or ), then

to (or for some models), and then to the city READY R

code of the currently selected Home City.

This is the city code setting mode. •

The watch will exit the setting mode automatically if •

you do not perform any operation for about two or

three minutes.

For details about city codes, see the “City Code •

Table”.

To change the Home City setting, press 2. to move the D

x clockwise.Second Hand

Keep pressing •D until the x is pointing Second Hand

at the city code you want to select as your Home City.

Each time you change the city code setting, the •z

Hour Hand, c b and Minute Hand move to Day

the current time and date for that city code. Do not

perform the next operation until these hands stop

moving.

Press 3. to toggle the time for the currently selected city code between BSTD

(standard time)/ (daylight saving time).DST

While you are selecting the Home City code, the short end of the •v Day of the

Week Hand will indicate whether the currently selected city code is conﬁgured

for standard time ( ) or daylight saving/summer time ( ).STD DST

Note that you cannot switch between •STD DST (standard time)/ (daylight saving

time) while is selected as your Home City.UTC

After all the settings are the way you want, press 4. to return to regular A

timekeeping.

To toggle the Home City time between standard time and daylight saving time

Perform the step 1 under “To conﬁgure Home City settings”.1.

Each time you select a city code, the •z c and Hour Hand move to Minute Hand

the current time for that city code. Do not perform the next operation until these

hands stop moving.

The short end of the •v will indicate whether the currently Day of the Week Hand

selected city code is conﬁgured for standard time ( ) or daylight saving/STD

summer time ( ).DST

Press 2. to toggle the time for the city code of the currently selected Home City B

between (standard time)/ (daylight saving time).STD DST

Note that you cannot switch between •STD DST (standard time)/ (daylight saving

time) while is selected as your Home City.UTC

After all the settings are the way you want, press 3. to return to regular A

timekeeping.

B +@

56 *>

B +

>@ *

Note

After you specify a city code, the watch will use UTC* offsets to calculate the •

World Time based on the current time in your Home City.

Coordinated Universal Time, the world-wide scientiﬁc standard of timekeeping. *

The reference point for UTC is Greenwich, England.

Selecting some city codes automatically makes it possible for the watch to •

receive the time calibration signal for the corresponding area. See “Radio

Controlled Atomic Timekeeping” for details.

Conﬁguring Current Time and Date Settings Manually

You can conﬁgure current time and date settings manually when the watch is unable

to receive a time calibration signal.

To change the current time setting manually

In the regular timekeeping mode, keep 1. depressed A

(for about ﬁve seconds) as the x goes Second Hand

through the following sequence.

Moves to the last signal reception result ( •Y N or ), then

to (or for some models), and then to the city READY R

code of the currently selected Home City.

The short end of the •v will Day of the Week Hand

indicate whether the currently selected city code is

conﬁgured for standard time ( ) or daylight saving/STD

summer time ( ).DST

Change the Home City and daylight saving time (DST) 2.

settings, if you want.

For details about these settings, see steps 2 and 3 •

under “To conﬁgure Home City settings”.

In the following steps, each press of •C cycles

between settings as shown below.

Home city/DST Hour/Minute Year

(tens digit)

Day Month

Year

(ones digit)

Press 3. .C

The •v will move to . This is the time setting mode.Day of the Week Hand Su

The •x indicates whether the current time is a.m. ( ) or p.m. ( ).Second Hand A P

Use 4. (+) and (–) to change the time (hour and minute) setting.D B

Each press of either button will move the hands ( •z c and Hour Hand Minute

Hand) to one minute.

Holding down •D B or will start high-speed

z c and Hour Hand Minute Hand

movement in the applicable direction. To stop high-speed hand movement,

press any button.

When setting the time, make sure that the •x is in the correct Second Hand

A P (a.m.) or (p.m.) position for the time you are setting.

If you want to change the date setting at this time, press •C and perform the

procedure starting from step 3 under “To change the current date setting

manually”.

After the time setting is the way you want, press 5. to return to regular A

timekeeping.

This will cause the •x to move automatically to 12 o’clock and Second Hand

resume movement from there.

To change the current date setting manually

3090

Setting the year (tens digit)

In the regular timekeeping mode, keep 1. A

depressed (for about ﬁve seconds) as the

x goes through the following Second Hand

sequence.

Moves to the last signal reception result ( •Y or

N READY R), then to (or for some models),

and then to the city code of the currently

selected Home City.

Press 2. twice.C

The •x will move to the tens digit Second Hand

of the current year setting. This is the year

setting mode.

The year can be set in the range of 2000 to •

2099.

Press 3. to move the Dx clockwise Second Hand

until it is pointing at the year tens digit you want

to select.

Setting the year (ones digit)

After you select the year tens digit, press 4. .C

The •x Second Hand will move to the ones digit

of the current year.

Press 5. to move the Dx clockwise Second Hand

until it is pointing at the year ones digit you want

to select.

After you select the year ones digit, press 6. .C

The •x Second Hand will move to the currently

selected month. This is the month setting

mode.

@ >

B +

@ >

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	LIW-M1100DB-1AER
Gewicht:	135 g
Waterbestendig diepte:	50 m
Wereldklok functie:	Ja
Agenda:	Ja
Horlogekast materiaal:	Roestvrijstaal
Band materiaal:	Roestvrijstaal
Glas type van horloge:	Saffier
Ondersteund aantal accu's/batterijen:	1
Zonnekracht:	Ja
Radio signaal ontvanger:	DCF/MSF/WWVB/JJY/BPC
Afmetingen (B x D x H):	43.7 x 9.9 x 48.4 mm
Type batterij:	CTL920