Casio GST-210GD-1 Handleiding

Casio Horloge GST-210GD-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio GST-210GD-1 (6 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Operation Guide 5475

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

E-2

About This Manual

• Depending on the model of your watch, display text

appears either as dark ﬁ gures on a light background, or

light ﬁ gures on a dark background. All examples in this

manual are shown using dark ﬁ gures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁ gure Home City settings” (page E-14) to conﬁ gure

your Home City and daylight saving time settings.

Important!

Proper World Time Mode data depends on correct Home City, time, and date settings

in the Timekeeping Mode. Make sure you conﬁ gure these settings correctly.

2. Set the current time.

See “Conﬁ guring Current Time and Date Settings” (page E-17).

The watch is now ready for use.

E-4

Contents

About This Manual …………………………………………………………………… E-2

Things to check before using the watch ………………………………………… E-3

Mode Reference Guide ……………………………………………………………… E-7

Timekeeping ……………………………………………………………………………E-12

Conﬁ guring Home City Settings ……………………………………………………E-14

To conﬁ gure Home City settings ………………………………………………E-14

To change the daylight saving time (summer time) setting…………………E-16

Conﬁ guring Current Time and Date Settings ……………………………………E-17

To change the current time and date settings ………………………………E-17

Hand Home Position Adjustment …………………………………………………E-21

To adjust home positions ………………………………………………………E-21

Checking the Current Time in a Different Time Zone ……………………………E-24

To enter the World Time Mode ………………………………………………E-25

E-5

To conﬁ gure World Time City and summer time settings …………………E-26

To swap your Home Time and World Time Cities …………………………E-28

Using the Stopwatch …………………………………………………………………E-29

To enter the Stopwatch Mode …………………………………………………E-29

To perform an elapsed time operation ………………………………………E-29

To pause at a split time …………………………………………………………E-30

To measure two ﬁ nishes ………………………………………………………E-30

Using the Countdown Timer …………………………………………………………E-32

To enter the Countdown Timer Mode …………………………………………E-32

To specify the countdown start time …………………………………………E-32

To perform a countdown timer operation ……………………………………E-33

To stop the alarm ………………………………………………………………E-34

Using the Alarm ………………………………………………………………………E-35

To enter the Alarm Mode ………………………………………………………E-35

To set an alarm time ……………………………………………………………E-36

To test the alarm ………………………………………………………………E-37

E-6

To turn an alarm and the Hourly Time Signal on and off……………………E-38

To stop the alarm ………………………………………………………………E-38

Illumination ……………………………………………………………………………E-39

To illuminate the display manually ……………………………………………E-39

To change the illumination duration …………………………………………E-40

To enable or disable auto light…………………………………………………E-42

Button Operation Tone ………………………………………………………………E-44

To enable or disable the button operation tone ……………………………E-44

Low Battery Indication ………………………………………………………………E-46

Troubleshooting ………………………………………………………………………E-48

Speciﬁ cations …………………………………………………………………………E-50

E-7

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

• View the current date in the Home City

• Conﬁ gure Home City and daylight saving time (DST)

settings

• Conﬁ gure time and date settings

Timekeeping Mode E-12

View the current time in one of 48 cities (31 time zones)

around the globe World Time Mode E-24

Use the stopwatch to measure elapsed time Stopwatch Mode E-29

Use the countdown timer Countdown Timer Mode E-32

• Set an alarm time

• Turn the hourly time signal on or off Alarm Mode E-35

E-8

Selecting a Mode

• The illustration below shows which buttons you need to press to navigate between

modes.

World Time ModeStopwatch Mode

Countdown Timer Mode Alarm Mode

World Time ModeStopwatch Mode

Countdown Timer Mode Alarm Mode

E-9

• To return to the Timekeeping Mode from any other mode, hold down

C for about

two seconds.

• The mode dial hand indicates the watch’s current mode.

Timekeeping Mode

Mode dial hand

Timekeeping Mode

Mode dial hand

Operation Guide 5475

E-10

General Functions (All Modes)

The functions and operations described in this section can be used in all of the modes.

Direct Timekeeping Mode Access

• To enter the Timekeeping Mode from any other mode, hold down

C for about two

seconds.

Auto Return Features

• The watch will automatically return to the Timekeeping Mode if you do not perform

any button operation for a particular amount of time in each mode.

Mode Name Approximate Elapsed Time

Alarm 3 minutes

Setting screen (digital setting ﬂ ashing) 3 minutes

Initial Screens

When you enter the Alarm or World Time Mode, the data you were viewing when you

last exited the mode appears ﬁ rst.

E-11

Scrolling

The D and B buttons are used on the setting screen to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Digital Meter

• The digital meter indicates the seconds count in the Timekeeping Mode (page

E-12), World Time Mode (page E-24), and Timer Mode (page E-32). In the

Stopwatch Mode (page E-29) it indicates the 1/10-second count.

Digital MeterDigital Meter

E-12

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

Day of week

Month Day

Hour hand

Second hand

Digital meter Minute hand

Mode dial hand

E-13

• Each press of A in the Timekeeping Mode will change screen contents as shown

below.

PM indicator

Month-Day Hour : Minutes Seconds

E-14

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To conﬁ gure Home City settings

1. In the Timekeeping Mode, hold down A until ADJ

appears in the lower display.

• When you release A (after ADJ appears), SET will

be ﬂ ashing in the upper display. This is the setting

mode.

• The watch will exit the setting mode automatically if

you do not perform any operation for about two or

three minutes.

2. Use D (East) and B (West) to scroll through the

available city codes.

• For details about city codes, see the “City Code

Table” at the back of this manual.

City codeCity code

E-15

3. Press C.

• This will cause DST to appear in the upper display

and the DST setting of the currently selected Home

City to appear in the lower display.

4. Press D to toggle the DST setting between daylight

saving time (

ON) and standard time (

OFF).

• Note that you cannot switch between standard

time and daylight saving time (DST) while UTC is

selected as your Home City.

5. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

Note

• After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current

time in your Home City.

* Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping.

The reference point for UTC is Greenwich, England.

DST indicatorDST indicator

E-16

To change the daylight saving time (summer time) setting

1. In the Timekeeping Mode, hold down A until ADJ

appears in the lower display.

• When you release A (after ADJ appears), SET will

be ﬂ ashing in the upper display.

2. Press C

• This will cause DST to appear in the upper display

and the DST setting of the currently selected Home

City to appear in the lower display.

3. Press D to toggle the DST setting between daylight saving time (

ON ) and standard

time (

OFF ).

4. After all of the settings are the way you want, press A to exit the setting screen.

• The DST indicator appears to indicate that daylight saving time is turned on.

E-17

Conﬁ guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date

settings if they are off.

Changing the digital Home City data should cause the analog time setting to change

accordingly. If the analog time does not indicate the digital time, check the home

positions of the hands and make adjustments if necessary (page E-21).

To change the current time and date settings

1. In the Timekeeping Mode, hold down A until ADJ

appears in the lower display.

• When you release A (after ADJ appears), SET will

be ﬂ ashing in the upper display.

City CodeCity Code

E-18

2. Press C to move the ﬂ ashing in the sequence shown below to select the other

settings.

City Code

(page E-14)

DST

(page E-16)

Illumination

Duration

(page E-40)

Button Operation

Tone On/Off

(page E-44)

Day Month

12/24-Hour

Format Seconds Hour

Year

Minutes

E-19

3. When the timekeeping setting you want to change is ﬂ ashing, use D and/or B

change it as described below.

Screen To do this: Do this:

Change the city code See page E-14.

Toggle between daylight saving time (

ON)

and standard time (

OFF). See page E-14.

Toggle between 12-hour (

12H ) and 24-hour

(24H) timekeeping. Press D.

Reset the seconds to

(If the current seconds count is between 30

and 59, one is added to the minute count).

Press D.

Change the hour or minutes

Use D (+) and B (–).

Change the year, month, or day

Operation Guide 5475

E-20

4. After all of the settings are the way you want, press A to exit the setting screen.

Note

• For information about selecting a Home City and conﬁ guring the DST setting,

see “Conﬁ guring Home City Settings” (page E-14).

• While the 12-hour format is selected for timekeeping, a P (PM) indicator will

appear for times from noon to 11:59 p.m. No indicator appears for times from

midnight to 11:59 a.m. With 24-hour format, time is displayed from 0:00 to

23:59, without any P (PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different

month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch’s battery replaced.

• The day of the week changes automatically when the date changes.

• Refer to the pages shown below for more information on Timekeeping Mode

settings.

- Button operation tone on/off: “To enable or disable the button operation tone”

(page E-44)

- Illumination duration setting: “To change the illumination duration” (page E-40)

E-21

Hand Home Position Adjustment

Strong magnetism or impact can cause the hands of the watch to go out of alignment.

• Home position adjustment is not necessary when the analog time and digital time

are the same time in the Timekeeping Mode.

To adjust home positions

1. In the Timekeeping Mode, hold down A and keep it

depressed for about ﬁ ve seconds until H.SET appears

on the lower display.

• When you release A after H.SET appears, the

second hand will move to 12 o’clock. This indicates

the second hand home position adjustment mode.

• Though ADJ will appear in the lower display about

two seconds after you hold down A, do not release

the button yet. Keep it depressed until H.SET

appears.

E-22

• Use the C button to select a hand for adjustment. Each press of C cycles

in sequences from the second hand, to the hour and minute hands, and then

the mode dial hand. Selecting a hand causes it to move to 12 o’clock and the

content of the upper display changes as shown in the table below.

Upper display Selected hand

Flashing 00 Second hand

Flashing 0:00 Hour and minute hands

Flashing Sub Mode dial hand

• If the selected hand does not move exactly to 12 o’clock, perform step 2 below

to adjust it.

• The watch will return to regular timekeeping automatically if you do not perform

any operation for about two or three minutes. Any changes you have made to

settings up to that point will be saved.

E-23

2. Use D (+) and B (–) to adjust the position of the currently selected hand.

• Holding down either button will cause the hand to move at high speed. Once

started, high-speed hand movement will continue even if you release the

button. To stop high-speed hand movement, press any button.

• The second hand and mode dial hand will automatically stop high-speed

movement after they complete one revolution. The minute hand will stop

automatically after 12 revolutions.

3. Press A to exit home position correction and return to regular timekeeping.

Note

After performing home position adjustment, enter the Timekeeping Mode and check to

make sure that the analog hands and the upper display indicate the same time. If they

do not, perform home position adjustment again.

E-24

Checking the Current Time in a Different Time Zone

You can use the World Time Mode to view the current time in one of 31 time zones (48

cities) around the globe. The city that is currently selected in the World Time Mode is

called the “World Time City”.

• You also can swap the current World Time City and Home Time City in the World

Time Mode (page E-27).

E-25

To enter the World Time Mode

Use C to select the World Time Mode as shown on page

E-8.

• The mode dial hand will point to WT, and the current

city code and city name will scroll across the lower

display. After that, the city code will remain shown in

the lower display. You can scroll the city code and city

name again by pressing A.

• The hour, minute, and second hands will indicate the

current Timekeeping Mode time.

Currently selected

World Time City

Current time in the currently

selected World Time City

Currently selected

World Time City

Current time in the currently

selected World Time City

E-26

To conﬁ gure World Time City and summer time settings

1. In the World Time Mode, use D (East) to scroll through

city codes.

• For details about city codes, see the “City Code

Table” at the back of this manual.

• Pressing down B and D at the same time will

jump to the UTC city code.

2. To toggle between summer time (DST in the upper

display) and standard time (

DST not displayed), hold

down A.

• Using the World Time Mode to change the DST

setting of the city code that is selected as your

Home City also will change the Timekeeping Mode

time DST setting.

• Note that you cannot switch between standard time/

daylight saving time (DST) while UTC is selected as

the World Time City.

DST indicator

Hold down A

DST indicator

Hold down A

E-27

• Note that the standard time/daylight saving time (DST) setting affects only the

currently selected time zone. Other time zones are not affected.

Swapping the Home City and World Time City

You can use the procedure below to swap your Home Time City with your World Time

City. This function comes in handy for those who often travel between two different

time zones.

•You need to conﬁ gure starting Home City and World Time City settings before

performing the procedure below.

To conﬁ gure Home City settings (page E-14)

To conﬁ gure World Time City and summer time settings (page E-26)

E-28

To swap your Home Time and World Time Cities

Press A and B at the same time.

•This causes the Home City time (indicated by the main hour and minute hands) and

the World Time City time (shown on the display) to be swapped with each other.

$ % and

Home City [TYO] Time

Current World Time

City and Time

Home City [NYC] Time

New World Time

City and Time

E-29

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two ﬁ nishes.

To enter the Stopwatch Mode

Use C to select the Stopwatch Mode as shown on page

E-8.

The mode dial hand will move to STW.

To perform an elapsed time operation

DDD D A

Start Stop (Resume) (Stop) Reset

Hours

Seconds

Minutes

1/100

second

Hours

Seconds

Minutes

1/100

second

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	GST-210GD-1
Timer:	1h
Gewicht:	195 g
Breedte:	52.4 mm
Diepte:	16.1 mm
Hoogte:	59.1 mm
LED backlight:	Ja
Type horloge:	Horloge
Type wijzerplaat horloge:	Analoge & lcd-wijzerplaat
Waterdicht:	Ja
Stopwatch:	Ja
Waterbestendig druk:	20 ATM
Waterbestendig diepte:	200 m
Schokbestendig:	Ja
Wereldklok functie:	Ja
Alarm functie:	Ja
Agenda:	Ja
Klokmodus:	12/24 uur
Nauwkeurigheid:	±15 sec/maand
Type kalender:	Overdag
Horlogekast materiaal:	Resin,Stainless steel
Kleur behuizing:	Black,Gold
Band materiaal:	Roestvrijstaal
Hoofdkleur van band:	Goud
Glas type van horloge:	Mineraalglas
Hoesvorm:	Rond
Hoofdkleur van wijzerplaat:	Zwart/Goud
Levensduur batterij/accu:	2 jaar
Stijl becijfering horloge:	Niet numeriek
Kleur becijfering horloge:	Goud
Ondersteund aantal accu's/batterijen:	2
Aantal wijzers:	3
Type batterij:	SR927W