Casio G-Shock GA-2000-5AER Handleiding

Casio Horloge G-Shock GA-2000-5AER

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio G-Shock GA-2000-5AER (8 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 346 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Operation Guide 5590
E-9
To do this: Enter this mode: See:
Set an alarm time Alarm Mode E-35
E-8
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
x View the current date in the Home City
x Configure Home City and daylight saving time (DST)
settings
x Configure time and date settings
xView the World Time city and time
xSwap Home Time and World Time information
x Change the display illumination duration setting
x Enable/disable the button operation tone
Timekeeping Mode E-15
View the current time in one of 48 cities (31 time
zones) around the globe World Time Mode E-25
Use the stopwatch to measure elapsed time Stopwatch Mode E-28
Use the countdown timer Countdown Timer Mode E-32
E-7E-6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-45
Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-48
Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-51
User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-62
E-5
Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35
To enter the Alarm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35
To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-37
To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-38
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38
Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-39
To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-39
To change the illumination duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40
Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-41
Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-44
E-4
Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-25
To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26
To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26
To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-27
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28
To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-29
To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-29
To measure two finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-29
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32
To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32
To configure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-33
To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34
E-3
Contents
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-1
Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-15
To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-17
Configuring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
To configure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-20
Adjusting the Digital Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . . E-21
To configure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-21
E-2
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To configure Home City settings” (page E-18) to configure
your Home City and daylight saving time settings.
Important!
x Proper World Time Mode data depends on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
x See “Adjusting the Digital Time and Date Settings” (page E-21).
The watch is now ready for use.
E-1
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
MA1902-EA
©
2019 CASIO COMPUTER CO., LTD.
Operation Guide 5590
E-19
Note
x After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-18
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down until the A
flashing indicator disappears from the display and SET
the currently selected city code appears on the display.
x This indicates the Home City setting mode.
2. Use (+) and (–) to scroll through city codes untilD B
the one you want is displayed.
x For details about city codes, see the “City Code
Table” at the back of this manual.
3. After the setting is the way you want, press toA
return to the Timekeeping Mode.
City Code
E-17
To swap your Home City and World Time City
In the Timekeeping Mode, hold down for at least three seconds.B
This will cause to flash on the display, and then your Home City and World SWAP
Time City will be swapped.
Example: To swap the Home City (TYO) and World Time City (NYC)
TYO information NYC information
B, at least
3 seconds
TYO (Tokyo) time NYC (New York) time
E-16
x To view the Home City name (English), press A.
x To view the World Time city code followed by the current time there, press B.
x To swap the Home City and World Time city information, hold down for at leastB
three seconds.
E-15
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Hour Second
Minute Each time you press , the display will change D
as follows.
Month-Day
Day of week
PM indicator
Hour : Minute
D D
D
E-14
2. Pressing twice again will cause the hands to return to their normal positions L
(normal timekeeping).
Note
x Watch button functions are the same regardless of whether the hands are moved
out of the way or at their normal positions.
x Changing to another mode will cause the hands to move back to their normal
positions.
x The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-13
1. Press twice.L
x This will cause the hour and minute hands to move to a location where they do
not block your view of the digital display.
Example: When the current time is 8:30
Flashes while the hands are moved out of the way.
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all modes.
Auto Return
If you do not perform any operation for about two or three minutes while configuring
settings (setting flashing on the digital display) in any mode, the watch will exit the
setting operation and return to normal display.
Scrolling
The and are used on the setting mode to scroll through data on the display. B D
In most cases, holding down these buttons during a scroll operation scrolls through
the data at high speed.
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
x This operation can be performed in any mode. In the case of a setting mode
(setting flashing on the screen), the hands will move out of the way automatically,
even if you do not perform the below operation.
E-11
Countdown Timer Mode
C
Alarm Mode Stopwatch Mode
C C
x To return to the Timekeeping Mode from any other mode, hold down for at C
least two seconds.
E-10
Selecting a Mode
x Press C to cycle between the modes as shown below.
x In any mode, press L to illuminate the display.
Timekeeping Mode World Time Mode
C C
Operation Guide 5590
E-29
To perform an elapsed time operation
D D D D B
Start Stop (Resume) (Stop) Reset
To pause at a split time
D B B D B
Start Split
(SPLIT flashing)
Split release Stop Reset
To measure two finishes
D B D B B
Start Split
(SPLIT flashing)
First runner finishes.
Display time of first
runner.
Stop
(SPLIT displayed)
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-28
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two finishes.
x The stopwatch measures elapsed time in units of 1/100 seconds for the first hour,
and in 1-second units after that for up to 24 hours total. After that, elapsed time
reverts to zero and then stops.
Seconds
Minutes
1/100 Second
To enter the Stopwatch Mode
Use to select the Stopwatch Mode as shown on page E-11.C
E-27
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, use and to display the D B
city code (time zone) whose Standard Time/Daylight
Saving Time setting you want to change.
2. Hold down for at least two seconds.A
x This toggles the city code you selected in step1
between Daylight Saving Time ( indicatorDST
displayed) and standard time ( indicator not DST
displayed).
x Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as
the World Time City.
x The standard time/daylight saving time (DST) setting
affects only the currently displayed city. Other cities
are not affected.
DST indicator
E-26
To enter the World Time Mode
Use to select the World Time Mode as shown on page E-10.C
To view the time in another time zone
In the World Time Mode, use and to change the city code.D B
E-25
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 31 time zones (48 cities) around the globe.
The city that is currently selected in the World Time Mode
is called the “World Time City”.
x The hour and minute hands indicate information for the
currently selected Home City.
x When you enter the World Time Mode, the currently
selected city code and city name (English) scroll once
across the digital display. After that, the current time in
the World Time City is displayed.
x You can view the name (English) of your Home City by
pressing A.
World Time City hour and
minute
Second
E-24
Note
x Resetting the seconds to 00 while the current count is in the range of 30 to
59causes the minutes to be increased by 1.
x The watchs built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x While 12-hour format is selected for timekeeping, a indicator will appear forP
times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
P indicator.
x The day of the week changes automatically when the date changes.
E-23
3. When the timekeeping setting you want to change is flashing, perform the
operation described below.
Screen To do this: Do this:
Toggle between 12-hour ( ) and 24-hour 12H
(24H) timekeeping Use and D B.
Reset the seconds to 00 Press D.
Change the hour or minute
Use (+) and (–) to D B
change these settings.
Change the year
Change the month or day
4. Press to exit the setting mode.A
E-22
2. Press to move the flashing in the sequence shown below to select the other C
settings.
Home City
(page E-18)
CDST
(page E-20)
C
12/24-Hour Format
C
Seconds
C
CHour
C
Illumination Duration
(page E-39) Minute
CC
Button Operation Tone On/Off
(page E-43) C
Day
C
Month
C
Year
E-21
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To configure the digital time and date settings
1. In the Timekeeping Mode, hold down until the A
flashing indicator disappears from the display SET
and the currently selected city code appears on the
display.
E-20
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down until the A
flashing indicator disappears from the display and SET
the currently selected city code appears on the display.
2. Press to display the DST setting mode.C
3. Press or to toggle between Daylight Saving D B
Time ( ) and Standard Time ( ).ON OFF
x Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
x The indicator appears to indicate that DaylightDST
Saving Time is turned on.
DST indicator


Product specificaties

Merk: Casio
Categorie: Horloge
Model: G-Shock GA-2000-5AER

Heb je hulp nodig?

Als je hulp nodig hebt met Casio G-Shock GA-2000-5AER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Casio

Handleiding Horloge

Nieuwste handleidingen voor Horloge