Casio G-Shock AWG-M100SF-1H4ER Handleiding

Casio Horloge G-Shock AWG-M100SF-1H4ER

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio G-Shock AWG-M100SF-1H4ER (10 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/10
Operation Guide 5230
E-9
E-42 Confi guring Home City Settings
E-42 To confi gure Home City settings
E-45 To change the Daylight Saving Time (summer time) setting
E-48 Confi guring Current Time and Date Settings Manually
E-48 To change the current time and date settings manually
E-53 Using the World Time Mode
E-53 To enter the World Time Mode
E-53 To view the time in another time zone
E-54 To specify standard time or daylight saving time (DST) for a city
E-55 To swap your Home Time and World Time Cities
E-57 Using the Stopwatch
E-57 To enter the Stopwatch Mode
E-58 To perform an elapsed time operation
E-58 To pause at a split time
E-58 To measure two fi nishes
E-8
Contents
E-2 About This Manual
E-4 Things to check before using the watch
E-12 Charging the Watch
E-20 To recover from the sleep state
E-21 Radio Controlled Atomic Timekeeping
E-26 To get ready for a receive operation
E-29 To perform manual receive
E-33 To check the latest signal reception results
E-34 To turn auto receive on and off
E-37 Mode Reference Guide
E-41 Timekeeping
E-7
The watch is now ready for use.
For details about the watch’s radio controlled timekeeping feature, see “Radio x
Controlled Atomic Timekeeping” (page E-21).
E-6
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-42) to
confi gure your Home City and daylight saving time settings.
Important!
Proper time calibration signal reception and World Time Mode data depend on
correct Home City, time, and date settings in the Timekeeping Mode. Make sure
you configure these settings correctly.
3. Set the current time.
xTo set the time using a time calibration signal
See “To get ready for a receive operation” (page E-26).
xTo set the time manually
See “Confi guring Current Time and Date Settings Manually” (page E-48).
E-5
Go to step 2.
The watch is charged.
For details about charging, see “Charging the Watch” (page E-12).
Power is low. Charge the watch by placing it in a location where it is exposed to
light. For details, see “Charging the Watch” (page E-12).
NEXT
E-4
Things to check before using the watch
1. Check the battery power level.
Is H or indicated as the battery power indicator (page E-15)?M
Battery power
indicator
YES
NO
E-3E-2
About This Manual
Depending on the model of your watch, display text x
appears either as dark fi gures on a light background,
or light fi gures on a dark background. All examples
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown x
in the illustration.
Note that the product illustrations in this manual are x
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
Be sure to keep all user documentation handy for future reference.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of this
product or its malfunction.
MA1611-ED
Operation Guide 5230
E-19
For details about the operating time and daily operating conditions, see the “Power x
Supply” (page E-94) section of the Specifi cations.
Power Saving
When turned on, Power Saving enters a sleep state automatically whenever the
watch is left for a certain period in an area where it is dark. The table below shows
how watch functions are affected by Power Saving.
For information about enabling and disabling power saving, see “To turn Power x
Saving on and off” (page E-83).
There actually are two sleep state levels: “display sleep” and “function sleep”. x
Elapsed Time in Dark Digital Dials Operation
60 to 70 minutes (display sleep) Blank Digital dials are off, but all functions
are enabled.
6 or 7 days (function sleep) Blank Hour and minute hands stop at
12 o’clock. All functions are disabled,
but timekeeping is maintained.
E-18
Charging Times
Exposure Level
(Brightness)
Daily
Operation
*1
Level Change *2
Level 5 Level 4 Level 3 Level 2 Level 1
Outdoor sunlight
(50,000 lux) 8 min. 3 hours 22 hours 6 hours
Window sunlight
(10,000 lux) 30 min. 7 hours 83 hours 23 hours
Window sunlight on
cloudy day (5,000 lux) 48 min. 10 hours
134 hours
36 hours
Indoor fl uorescent
lighting (500 lux) 8 hours 128 hours – – – – – –
1 Approximate exposure each day to generate power for normal daily operation. *
2 Approximate exposure time (in hours) required to take power up one level. *
The above exposure times all are for reference only. Actual exposure times depend x
on lighting conditions.
E-17
Power Recovery Mode
Performing multiple illumination, beeper, and/or high-speed hand movement x
operation during a short period may cause all of the battery power indicators (H,
M L, and ) to start fl
ashing in the lower digital dial. This indicates that the watch is in
the power recovery mode. Illumination, alarm, countdown timer alarm, and hourly
time signal operations will be disabled until battery power recovers.
Battery power will recover in about 15 minutes. At this time, the battery power x
indicators ( , , ) will stop flH M L ashing. This indicates that the functions listed above
are enabled again.
If all of the battery power indicators ( xH M L, , ) are fl ashing and the (charge) CHG
message also is fl ashing, it means the battery level is very low. Expose the watch
to bright light as soon as possible.
Frequent fl ashing of all of the battery power indicators ( xH M L, , ) probably means
that remaining battery power is low. Leave the watch in bright light to allow it to
charge.
E-16
At Level 5, all functions are disabled and settings return to their initial factory x
defaults. Once the battery reaches Level 2 ( ) after falling to Level 5, reconfiM gure
the current time, date, and other settings.
Display indicators reappear as soon as the battery is charged from Level 5 to x
Level 2 ( ).M
Leaving the watch exposed to direct sunlight or some other very strong light x
source can cause the battery power indicator to show a reading temporarily that
is higher than the actual battery level. The correct battery level should be indicated
after a few minutes.
The current time and all other settings return to their initial factory defaults x
whenever battery power drops to Level 5 and when you have the battery replaced.
E-15
Level
Battery Power Indicator
Function Status
1
(H) All functions enabled.
2
(M) All functions enabled.
3
(L and
LOW)
Auto and manual receive, illumination, and beeper
disabled.
Except for Timekeeping Mode, all other modes
disabled.
4
(CHG)
All functions and display indicators disabled except
for timekeeping and display of (charge) in the CHG
lower digital dial.
Hour and minute hands stopped at 12 o’clock.
5 All functions disabled.
The fl ashing xLOW message at Level 3 (L) tells you that battery power is very low,
and that exposure to bright light for charging is required as soon as possible.
E-14
Storing the watch for long periods in an area where there is no light or wearing it in x
such a way that it is blocked from exposure to light can cause power to run down.
Expose the watch to bright light whenever possible.
Power Levels
You can get an idea of the watch’s power level by observing the battery power
indicator in the lower digital dial.
Battery power indicator
E-13
Warning!
Leaving the watch in bright light for charging can cause it to become quite
hot. Take care when handling the watch to avoid burn injury. The watch can
become particularly hot when exposed to the following conditions for long
periods.
On the dashboard of a car parked in direct sunlight x
Too close to an incandescent lamp x
Under direct sunlight x
Important!
Allowing the watch to become very hot can cause the digital displays to black out. x
The appearance of the LCD should become normal again when the watch returns
to a lower temperature.
Turn on the watch’s Power Saving function (page E-19) and keep it in an area x
normally exposed to bright light when storing it for long periods. This helps to
ensure that power does not run down.
E-12
Charging the Watch
The face of the watch is a solar panel that generates power from light. The
generated power charges a built-in rechargeable battery, which powers watch
operations. The watch charges whenever it is exposed to light.
Charging Guide
Whenever you are not
wearing the watch, leave
it in a location where it is
exposed to light.
Best charging x
performance is achieved
by exposing the watch
to the strongest light
available.
When wearing the watch,
make sure that its face is
not blocked from light by
the sleeve of your clothing.
The watch may enter a x
sleep state (page E-19) if
its face is blocked by your
sleeve even only partially.
E-11
E-75 Hand Home Position Adjustment
E-75 To adjust home positions manually
E-78 Moving the Hands for Easy Viewing of the Digital Dials
E-79 To move the hands to view a digital dial
E-80 To return the hands to their normal positions
E-81 Other Settings
E-81 To turn the button operation tone on and off
E-83 To turn Power Saving on and off
E-85 Troubleshooting
E-92 Specifi cations
E-95 Operating Precautions
E-104 User Maintenance
E-10
E-60 Using the Countdown Timer
E-60 To enter the Countdown Timer Mode
E-60 To specify the countdown start time
E-62 To perform a countdown timer operation
E-62 To stop the alarm
E-63 Using the Alarm
E-63 To enter the Alarm Mode
E-64 To set an alarm time
E-65 To test the alarm
E-66 To turn an alarm and the Hourly Time Signal on and off
E-66 To stop the alarm
E-68 Illumination
E-68 To turn on illumination manually
E-69 To change the illumination duration
E-72 To turn the auto light switch on and off
Operation Guide 5230
E-29
You can use the procedure under “To turn auto receive on and off” (page E-34) to x
enable or disable auto receive.
To perform manual receive
In the Timekeeping Mode, hold down until the watch D
beeps.
A signal level indicator (
xL1 L2 L3, , or , see page E-32)
appears in the lower digital dial after reception starts.
Do not move the watch or perform any button operation
until or appears in the right digital dial.GET ERR
RCVD indicator
Receiving
E-28
What you should do next depends on whether you are using Auto Receive or 3.
Manual Receive.
Auto Receive: Leave the watch over night in the location you selected in step 2. x
See “Auto Receive” below for details.
Manual Receive: Perform the operation under “To perform manual receive” on x
page E-29.
Auto Receive
With Auto Receive, the watch performs the receive operation each day x
automatically up to six times (up to fi ve times for the Chinese calibration signal)
between the hours of midnight and 5 a.m. (according to the Timekeeping Mode
time). When any receive operation is successful, none of the other receive
operations for that day are performed.
When a calibration time is reached, the watch will perform the receive operation x
only if it is in the Timekeeping Mode or World Time Mode. The receive operation
is not performed if a calibration time is reached while you are confi guring settings,
while a countdown timer operation is in progress, or while the hands have been
moved for easier viewing of the digital dials (page E-79).
E-27
Signal reception may be diffi cult or even impossible under the conditions x
described below.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
offi ce
equipment,
or a mobile
phone
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near
high-tension
power lines
Among
or behind
mountains
E-26
To get ready for a receive operation
Confi rm that the watch is in the Timekeeping Mode. If it isn’t, use 1. to enter the C
Timekeeping Mode (page E-38).
The antenna of this watch is located on its 12 o’clock side. Position the watch 2.
with 12 o’clock facing towards a window as shown in the nearby illustration.
Make sure there are no metal objects nearby.
12 o’clock
or
Signal reception normally is better x
at night.
The receive operation takes from three x
to eight minutes, but in some cases
it can take as long as 16 minutes.
Take care that you do not perform any
button operation or move the watch
during this time.
E-25
Even when the watch is within range of a transmitter, signal reception may be x
impossible due to the effects of geographic contours, structures, weather, the time
of year, the time of day, radio interference, etc. The signal becomes weaker at
distances of approximately 500 kilometers, which means that the infl uence of the
conditions listed above becomes even greater.
Signal reception may not be possible at the distances noted below during certain x
times of the year or day. Radio interference may also cause problems with
reception.
Mainfl ingen (Germany) or Anthorn (England) transmitters: 500 kilometers −
(310 miles)
Fort Collins (United States) transmitter: 600 miles (1,000 kilometers) −
Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles) −
Shangqiu (China) transmitter: 500 kilometers (310 miles) −
As of December 2010, China does not use Daylight Saving Time (DST). If China x
does go to the Daylight Saving Time system in the future, some functions of this
watch may no longer operate correctly.
E-24
Japanese Signals Chinese Signal
Fukushima
500 kilometers
1,000 kilometers
Fukuoka/Saga
Signals are receivable in the Taiwan area
when reception conditions are good.
1,500 kilometers
Changchun500 kilometers
Beijing
Shangqiu
Shanghai
Chengdu
Hong Kong
E-23
Approximate Reception Ranges
UK and German Signals North American Signal
Anthorn
500 kilometers
1,500 kilometers
Mainfl ingen
The Anthorn signal is receivable
within this area.
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
E-22
If your Home City Code setting is this: The watch can receive the signal from the
transmitter located here:
LIS, LON, MAD, PAR, ROM, BER, STO,
ATH, MOW Anthorn (England), Mainfl ingen (Germany)
HKG, BJS Shangqiu City (China)
TPE, SEL, TYO Fukushima (Japan), Fukuoka/Saga (Japan)
HNL, ANC, YVR, LAX, YEA, DEN, MEX,
CHI, NYC, YHZ, YYT Fort Collins, Colorado (United States)
Important!
The areas covered by
xMOW HNL ANC, and are quite far from the calibration signal
transmitters, so certain conditions may cause reception problems.
When
xHKG BJS or is selected as the Home City, only the time and date are
adjusted according to the time calibration signal. You need to switch manually
between standard time and daylight saving time (DST) if required. See “To
confi gure Home City settings” (page E-42) for information about how to do this.
E-21
Radio Controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting
accordingly. However, when using the watch outside of areas covered by time
calibration signals, you will have to adjust the settings manually as required. See
“Confi guring Current Time and Date Settings Manually” (page E-48) for more
information.
This section explains how the watch updates its time settings when the city code
selected as the Home City is in Japan, North America, Europe, or China, and is one
that supports time calibration signal reception.
E-20
The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch x
is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep
state.
The watch will not enter a sleep state while it is in the Stopwatch Mode or x
Countdown Timer Mode.
To recover from the sleep state
Move the watch to a well-lit area or press any button.

Product specificaties

Merk: Casio
Categorie: Horloge
Model: G-Shock AWG-M100SF-1H4ER

Heb je hulp nodig?

Als je hulp nodig hebt met Casio G-Shock AWG-M100SF-1H4ER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Horloge Casio

Casio

Casio Baby-G BGA-320 Handleiding

28 Oktober 2024
Casio

Casio G-Shock GMA-B800 Handleiding

20 September 2024
Casio

Casio G-Shock GW-9500 Handleiding

20 Augustus 2024
Casio

Casio Edifice ECB 950 Handleiding

6 Augustus 2024
Casio

Casio G-Shock GBD-800 Handleiding

21 Juli 2024
Casio

Casio G-Shock GR-B100 Handleiding

21 Juli 2024
Casio

Casio Baby-G MSG-S500 Handleiding

21 Juli 2024
Casio

Casio Edifice EFB-108 Handleiding

20 Juni 2024
Casio

Casio G-Shock GST-B600 Handleiding

24 Mei 2024
Casio

Casio G-Shock GD-B500 Handleiding

23 Mei 2024

Handleiding Horloge

Nieuwste handleidingen voor Horloge

Diesel

Diesel Overflow DZ4480 Handleiding

16 November 2024
Skagen

Skagen Falster Gen 4 Connected SKT5104 Handleiding

15 November 2024
Skagen

Skagen Falster Gen 4 Connected SKT5103 Handleiding

15 November 2024
Skagen

Skagen Falster Gen 4 Connected SKT5102 Handleiding

15 November 2024
Emporio Armani

Emporio Armani Connected Hybrid ART3023 Handleiding

15 November 2024
Emporio Armani

Emporio Armani Connected Hybrid ART3024 Handleiding

15 November 2024
Emporio Armani

Emporio Armani Connected Hybrid ART3019 Handleiding

15 November 2024
Emporio Armani

Emporio Armani Connected Handleiding

15 November 2024
Mitsubishi

Mitsubishi BN 0024 Handleiding

14 November 2024
ICE Watch

ICE Watch Cocorico Handleiding

14 November 2024