Casio Edifice EQS-500C-1A1ER Handleiding

Casio Horloge Edifice EQS-500C-1A1ER

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Edifice EQS-500C-1A1ER (4 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Operation Guide 5123

MA1004-EA

Congratulations upon your selection of this CASIO watch.

This watch does not have a city code that corresponds to the UTC offset of –3.5

hours for Newfoundland, Canada.

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage

or loss suffered by you or any third party arising through the use of this product or

its malfunction.

About This Manual

Button operations are indicated using the letters through A

D shown in the illustration.

Hand Functions

z Hour Hand

x Second Hand

c Minute Hand

v Upper Left Dial Hand

b Lower Left Dial Hands

n Right Dial Hand: Indicates the current mode.

m Day

This User’s Guide uses numbers shown above to identify

watch hands and indicators.

Things to check before using the watch

1. Hold down for about two seconds to enter the Timekeeping Mode, and C

then observe the movement of the

x .Second Hand

Is the moving smoothly at one-second intervals?xSecond Hand

Is the moving at xSecond Hand

two-second intervals or is it stopped

completely?

Go to step 2.

The watch is charged sufﬁciently.

For details about charging, see

“Charging the Watch”.

Power is low. Charge the watch by placing

it in a location where it is exposed to light.

For details, see “Charging the Watch”.

YES

2. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To conﬁgure Home City settings” to conﬁgure your Home

City and daylight saving time settings.

Important!

World Time settings depend on correct Home City, time, and date settings in the

Timekeeping Mode. Make sure these settings are conﬁgured correctly.

3. Set the current time.

See “Conﬁguring Current Time and Date Settings”.

The watch is now ready for use.

Charging the Watch

The face of the watch is a solar cell that generates power from light. The generated

power charges a built-in rechargeable battery, which powers watch operations. The

watch charges whenever it is exposed to light.

Charging Guide

Whenever you are not

wearing the watch, be sure

to leave it in a location

where it is exposed to light.

Best charging •

performance is achieved

by exposing the watch to

light that is as strong as

possible.

When wearing the watch,

makes sure that its face is

not blocked from light by the

sleeve of your clothing.

The watch may enter a •

sleep state if its face is

blocked by your sleeve

even only partially.

Warning!

Leaving the watch in bright light for charging can cause it to become quite hot.

Take care when handling the watch to avoid burn injury. The watch can become

particularly hot when exposed to the following conditions for long periods.

On the dashboard of a car parked in direct sunlight •

Too close to an incandescent lamp •

Under direct sunlight •

Important!

Keep the watch in an area normally exposed to bright light when storing it for long •

periods. This helps to ensure that power does not run down.

Storing the watch for long periods in an area where there is no light or wearing it in •

such a way that it is blocked from exposure to light can cause power to run down.

Make sure that the watch is exposed to bright light whenever possible.



B +

*> 6 5

Power Levels

You can get an idea of the watch’s power level by

observing the movement of the

x in the Second Hand

Timekeeping Mode.

If the •x is moving normally at one-second Second Hand

intervals, power is at Level 1.

If the •x is moving at two-second intervals, Second Hand

power is at Level 2, which is quite low. Expose the watch

to light as soon as possible so it can charge.

Moving at two-second

intervals.

B +

Level Hand Movement Function Status

1 Normal. All functions enabled.

x moving at two-second Second Hand

intervals.

m changes to (home position).Day 1Beeper disabled.

x stopped.Second Hand

z c and Hour Hand stopped Minute Hand

at 12 o’clock.

All functions disabled.

When power drops to Level 3, all functions will be disabled but the watch will •

continue to keep time internally for about one week. If you recharge the battery

sufﬁciently during this period, the analog hands will move automatically to the

correct setting and regular timekeeping will resume. After one week, all settings

(including timekeeping) will be cleared. Recharging the battery will reset all settings

to their initial factory defaults.

Power Recovery Mode

The watch is designed to go into a power recovery mode that stops hand operation

temporarily whenever power suddenly drops below a certain level due to overuse

of the alarm tone over a short period. Note that all operations are disabled while the

watch is in the power recovery mode.

The hands will move to the correct positions and the watch will resume normal

operation after power recovers (in about 15 minutes). Putting the watch in a location

where it is exposed to light will help power to recover sooner.

Charging Times

Exposure Level (Brightness) Daily

Operation *1

Level Change *2

Level 3 Level 2 Level 1

Outdoor sunlight (50,000 lux) 8 minutes 2 hours 27 hours

Window sunlight (10,000 lux) 30 minutes 6 hours 100 hours

Window sunlight on cloudy day

(5,000 lux) 48 minutes 10 hours – – –

Indoor ﬂuorescent lighting (500 lux) 8 hours 112 hours – – –

1 Approximate exposure each day to generate power for normal daily operation. *

2 Approximate exposure to take power up one level. *

The above exposure times all are for reference only. Actual exposure times depend •

on lighting conditions.

For details about the operating time and daily operating conditions, see the “Power •

Supply” section of the Speciﬁcations.

Power Saving

Power Saving enters a sleep state automatically whenever the watch is left for a

certain period in an area where it is dark. The table below shows how watch functions

are affected by Power Saving.

There actually are two sleep state levels: “second hand sleep” and “function sleep”. •

Elapsed Time in Dark Operation

60 to 70 minutes (second hand

sleep)

x only is stopped at 12 o’clock, all other Second Hand

functions are enabled.

6 or 7 days (function sleep) All functions, including analog timekeeping, disabled •

Internal timekeeping maintained. •

The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch •

is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep

state.

The watch will not enter a sleep state while it is in the Stopwatch Mode. •

To recover from the sleep state

Move the watch to a well-lit area or press any button.

Mode Reference Guide

Your watch has four “modes”. The mode you should select depends on what you

want to do.

To do this: Enter this mode:

View the current time in your Home City and in one of 29 •

cities around the globe

Conﬁgure Home City and daylight saving time (DST) •

settings

Conﬁgure time and date settings •

Timekeeping Mode

Use the stopwatch to measure elapsed time Stopwatch Mode

View the current time in one of 29 cities (time zones) around

the globe World Time Mode

Set an alarm time Alarm Mode

Selecting a Mode

With this watch, everything starts from the Timekeeping Mode.

To determine the watch’s current mode

Check the position of the

n as shown Right Dial Hand

under “To select a mode”.

To return to the Timekeeping Mode from any other

mode

Hold down for about two seconds until the watch beeps C

twice.



Operation Guide 5123

To select a mode

Press to cycle between the modes as shown below. The Cn Right Dial Hand

indicates the currently selected mode.

Timekeeping Mode Stopwatch Mode

Alarm Mode World Time Mode

The short end of the

hand indicates the

day of the week.

The hand points to .0

The hand points to . The hand points to ALM STD

or .DST

Timekeeping

Use the Timekeeping Mode to view the current time and date. To enter the

Timekeeping Mode from any other mode, hold down for about two seconds.C

Hand Functions

z Hour Hand

x Second Hand

c Minute Hand

v Upper Left Dial Hand:

Indicates the current hour in the Home City time in

24-hour format.

b Lower Left Dial Hands:

Indicate the current time in the World Time City in

24-hour format.

n Right Dial Hand: The short end of the hand indicates

the day of the week.

m Day

Conﬁguring Home City Settings

There are two Home City settings: actually selecting the Home City and selecting

either standard time or daylight saving time (DST).

To conﬁgure Home City settings

Note

This watch does not have a city code that corresponds •

to Newfoundland.

In the Timekeeping Mode, keep 1. depressed (for about A

ﬁve seconds) as the x moves to the city Second Hand

code of the currently selected Home City.

This indicates the city code setting mode. •

The watch will exit the setting mode automatically if •

you do not perform any operation for about two or

three minutes.

For details about city codes, see the “City Code •

Table”.

To change the Home City setting, press 2. to move the D

x clockwise.Second Hand

Keep pressing •D until the x is pointing Second Hand

at the city code you want to select as your Home City.

Each time you select a city code, the •z , Hour Hand

c v m , Minute Hand and Upper Left Dial Hand Day

move to the current time and date for that city code.

Do not perform the next operation until these hands

stop moving.

Press 3. to toggle the time for the currently selected B

city code between (standard time)/ (daylight STD DST

saving time).

In the city code setting mode, the •n indicates the current Right Dial Hand

daylight saving time setting as (standard time) or (daylight saving STD DST

time).

Note that you cannot switch between •STD DST (standard time)/ (daylight saving

time) while is selected as your Home City.UTC

After the setting is the way you want, press 4. to return to the Timekeeping Mode.A

To toggle the Home City time between standard time and daylight saving time

Perform the step 1 under “To conﬁgure Home City settings”.1.

Each time you select a city code, the •z c , Hour Hand , and Minute Hand

v move to the current time for that city code. Do not Upper Left Dial Hand

perform the next operation until these hands stop moving.

Press 2. to toggle the time for the city code of the currently selected Home City B

between (standard time)/ (daylight saving time).STD DST

In the city code setting mode, the •n indicates the current Right Dial Hand

daylight saving time setting as (standard time) or (daylight saving STD DST

time).

Note that you cannot switch between •STD DST (standard time)/ (daylight saving

time) while is selected as your Home City.UTC

After the setting is the way you want, press 3. to return to the Timekeeping Mode.A

Note

After you specify a city code, the watch will use UTC* offsets in the World Time •

Mode to calculate the current time for other time zones based on the current time

in your Home City.

Coordinated Universal Time, the world-wide scientiﬁc standard of timekeeping. The *

reference point for UTC is Greenwich, England.



B +

*> 6 5



B +

> @ 6 5

Conﬁguring Current Time and Date Settings

You can conﬁgure current time and date settings.

To change the current time setting

In the Timekeeping Mode, keep 1. depressed (for about A

ﬁve seconds) as the x moves to the city Second Hand

code of the currently selected Home City.

At this time, the •n will indicate the Right Dial Hand

Home City’s current daylight saving time setting ( STD

or ).DST

Change the Home City and daylight saving time (DST) 2.

settings, if you want.

For details about these settings, see steps 2 and 3 •

under “To conﬁgure Home City settings”.

In the following steps, each press of •C cycles

between settings as shown below.

Home city/DST Hour/Minute Year (tens digit)

Year (ones digit)

Day Month

Press 3. .C

The watch will beep, and the •x n and Second Hand will move Right Dial Hand

to their 12 o’clock positions. This is the time setting mode.

Use 4. (+) and (–) to change the time (hour and minute) setting.D B

Each press of either button will move the hands ( •z c and Hour Hand Minute

Hand) one minute.

Holding down •D B or will start high-speed

z c and Hour Hand Minute Hand

movement in the applicable direction. To stop high-speed hand movement,

press any button.

The •v z and Upper Left Dial Hand move in sync with each other.Hour Hand

When setting the time, make sure that the •v indicates the Upper Left Dial Hand

proper a.m./p.m. hour.

If you want to change the date setting at this time, press •C and perform the

procedure starting from step 3 under “To change the current date setting”.

After the time setting is the way you want, press 5. to return to the Timekeeping A

Mode.

This will cause the •x to move automatically to 12 o’clock and Second Hand

resume movement from there.

To change the current date setting

In the Timekeeping Mode, keep 1. depressed (for about ﬁve seconds) as the Ax

Second Hand moves to the city code of the currently selected Home City.

Press 2. twice.C

The watch will beep and change to the year setting mode. •

The year can be set in the range of 2000 to 2099. •

You can save your settings and exit the setting procedure at any time by •

pressing , which will return to the Timekeeping Mode. This will cause the Ax

Second Hand to move automatically to 12 o’clock and resume normal movement

from there.

Use 3. to change the tens digit of the year D

setting.

Each press of •D will move the x Second

Hand and change the tens digit of the year

setting.

After the tens digit of the year setting is the way 4.

you want, press .C

The watch will beep and change to the ones •

digit of the year setting mode.



B +

Setting the year (tens digit)

Use 5. to change the ones digit of the year D

setting.

Each press of •D will move the x Second

Hand and change the ones digit of the year

setting.

After the ones digit of the year setting is the way 6.

you want, press .C

The watch will beep and change to the month •

setting mode.

Setting the year (ones digit)

Use 7. to move the to the DxSecond Hand

month setting you want.

After the month setting is the way you want, 8.

press .C

The watch will beep and change to the day •

setting mode.

Setting the month

Dec

Jun

Jan

Apr

Feb

Mar

Jul

Sep

Aug

May

Oct

Nov

Operation Guide 5123

Use 9. (+) and (–) to change the setting.D B mDay

If you want to change the time setting at this time, •

press and then perform the procedure starting from C

step 3 under “To change the current time setting”.

After the settings are the way you want, press

10.

A to

return to the Timekeeping Mode.

The day of the week indicated by the •n Right Dial

Hand changes automatically in accordance with the

date (year, month, and day).

Note

The watch’s built-in full automatic calendar makes allowances for different month •

lengths and leap years. Once you set the date, there should be no reason to

change it except after you have the watch’s rechargeable battery replaced or after

power drops to Level 3.

Using the Stopwatch

The stopwatch measures elapsed time and split times.

Hand Functions

x Second Hand: Indicates the stopwatch 1/10-second

count.

b Lower Left Dial Hands:

Indicate the stopwatch minutes (short hand) and

seconds (long hand).

n Right Dial Hand:

Indicates the stopwatch 1/100-second count.

5@ 6

To specify standard time or daylight saving time (DST) for a city



Hold down

A for two

seconds



In the World Time Mode, use 1. to select the city code D

whose setting you want to change.

Wait until the •b complete their Lower Left Dial Hands

move to the time in the currently selected World Time

City. You will not be able to perform step 2 of this

procedure until the hands stop moving.

Hold down 2. for about two seconds until the watch A

beeps. This will cause the to toggle nRight Dial Hand

between (daylight saving time) and (standard DST STD

time).

Note that you cannot switch between •STD (standard

time)/ (daylight saving time) while is DST UTC

selected as the World Time City.

Note that the •STD DST (standard time)/ (daylight

saving time) setting affects only the currently selected

time zone. Other time zones are not affected.

Swapping your Home City and World Time City

You can use the procedure below to swap your Home City and World Time City. This

capability can come in handy when you frequently travel between two locations in

different time zones.

The following example shows what happens when the Home City and World Time

City are swapped while the Home City originally is ( ) and the World Time TOKYO TYO

City is ( ).NEW YORK NYC

Home City World Time City

Before swapping Tokyo

10:08 p.m.

(Standard time)

New York

9:08 a.m.

(Daylight saving time)

After swapping

New York

9:08 a.m.

(Daylight saving time)

Tokyo

10:08 p.m.

(Standard time)

To swap your Home City and World Time City

In the World Time Mode, use 1. to select the World Time D

City you want.

In this example, you would move the •x Second Hand

to ( ) in order to select New York as NEW YORK NYC

the World Time City.

Wait until the •b complete their Lower Left Dial Hands

move to the time in the currently selected World Time

City. You will not be able to perform step 2 of this

procedure until the hands stop moving.

Hold down 2. for about three seconds until the watch B

beeps.

This will make the World Time City ( •NEW YORK NYC/

in this example) your new Home City. At the same time,

it will change the Home City you had selected prior

to step 2 ( / in this example), to your new TOKYO TYO

World Time City

After swapping the Home City and World Time City, the •

watch will stay in the World Time Mode. The

x Second

Hand will point to your new World Time City ( /TOKYO

TYO in this example).

The •b will indicate the current Lower Left Dial Hands

time in your new World Time City.

Using the Alarm

When the alarm is turned on, an alarm will sound for about 10 seconds each day

when the time in the Timekeeping Mode reaches the preset alarm time. This is true

even if the watch is not in the Timekeeping Mode.

Hand Functions

x Second Hand:

Indicates the current alarm ON/OFF setting.

b Lower Left Dial Hands:

Indicate the current alarm time setting in 24-hour

format.

n Right Dial Hand: Points to .ALM



* @



* 6

To perform elapsed time measurement

Use 1. to move the Cn to .Right Dial Hand 0

Now you can perform either of following stopwatch operations.2.

To perform an elapsed time operation

B B B B D

Start Stop (Restart) (Stop) Reset

To pause at a split time

B D Normal stopwatch hand movement will

resume automatically after ﬁve seconds.

Start Split Stop Reset

Note

The Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.99 seconds. •

•D button operation (split, reset) is disabled while hands are moving at high speed

following a reset operation and when transitioning from a split time back to normal

elapsed timekeeping.

Once started, stopwatch timing continues until you press •B to stop it, even if you

exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch

limit deﬁned above.

If the stopwatch was not reset after the last elapsed time operation, timing will •

restart from where it was last stopped, and not from 0.

The •x indicates the 1/10-second count for the ﬁrst 30 seconds Second Hand

of a stopwatch elapsed time operation. After that, the hand stops at 12 o’clock

position. 1/10-second timing continues internally after the ﬁrst 30 seconds, and the

x will jump to the current value whenever (Stop) or (Split) is Second Hand B D

pressed.

Though the •n Right Dial Hand is stopped while an elapsed time measurement

operation is in progress, the watch keeps track of the 1/100-second count

internally. The n Right Dial Hand will jump to the current 1/100-second reading

whenever you stop the stopwatch or perform a split time operation.

Checking the Current Time in a Different Time Zone

You can use the World Time Mode to view the current time in one of 29 time zones

around the globe. The city that is currently selected in the World Time Mode is called

the “World Time City”.

Hand Functions

x Second Hand:

Indicates the currently selected World Time City.

b Lower Left Dial Hands:

Indicate the current time in the selected World Time

City in 24-hour format.

n Right Dial Hand:

Indicates the current (standard time) or STD DST

(daylight saving time) setting of the currently selected

time zone.

To view the time in another time zone

Use 1. to move the Cn to or .Right Dial Hand STD DST

The •x will move to the city code of the currently selected World Second Hand

Time City.

Use 2. to move the Dx to the city code you want to select as the Second Hand

World Time City.

The •b will move to the current time in the time zone of Lower Left Dial Hands

the current city code. At this time, the z c and Hour Hand will Minute Hand

continue to indicate the current time in the Home City.

For full information on city codes, see the “City Code Table”. •

If you think that the time indicated for the selected time zone is not correct, it •

probably means that there is something wrong with your Home City settings.

Use the procedure under “To conﬁgure Home City settings” to correct the Home

City settings.



* 6

To change the alarm time setting

Use 1. to move the Cn to .Right Dial Hand ALM

Use 2. (+) and (–) to change the alarm time setting.D B

Each press of either button will move the •b one minute.Lower Left Dial Hands

Holding down •D B or will start high-speed hand movement in the applicable

direction. To stop high-speed hand movement, press any button.

The alarm always works based on the time kept in the Timekeeping Mode. •

The watch will return to the Timekeeping Mode automatically if you do not •

perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press to toggle the alarm on and off. The Ax will Second Hand

indicate the current ON/OFF setting.

To stop the alarm

Press any button.

Product specificaties

Merk:	Casio
Categorie:	Horloge
Model:	Edifice EQS-500C-1A1ER

Heb je hulp nodig?

Als je hulp nodig hebt met Casio Edifice EQS-500C-1A1ER stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Horloge Casio

Casio Baby-G BGA-320 Handleiding

28 Oktober 2024

Casio G-Shock GMA-B800 Handleiding

20 September 2024

Casio G-Shock GW-9500 Handleiding

20 Augustus 2024

Casio Edifice ECB 950 Handleiding

6 Augustus 2024

Casio G-Shock GBD-800 Handleiding

21 Juli 2024

Casio G-Shock GR-B100 Handleiding

21 Juli 2024

Casio Baby-G MSG-S500 Handleiding

21 Juli 2024

Casio Edifice EFB-108 Handleiding

20 Juni 2024

Casio G-Shock GST-B600 Handleiding

24 Mei 2024

Casio G-Shock GD-B500 Handleiding

23 Mei 2024

Handleiding Horloge

Nieuwste handleidingen voor Horloge

Diesel Overflow DZ4480 Handleiding

16 November 2024

Skagen Falster Gen 4 Connected SKT5104 Handleiding

15 November 2024

Skagen Falster Gen 4 Connected SKT5103 Handleiding

15 November 2024

Skagen Falster Gen 4 Connected SKT5102 Handleiding

15 November 2024

Emporio Armani Connected Hybrid ART3023 Handleiding

15 November 2024

Emporio Armani Connected Hybrid ART3024 Handleiding

15 November 2024

Emporio Armani Connected Hybrid ART3019 Handleiding

15 November 2024

Emporio Armani Connected Handleiding

15 November 2024

Mitsubishi BN 0024 Handleiding

14 November 2024

ICE Watch Cocorico Handleiding

14 November 2024