Casio Baby-G BGA-180 Handleiding

Casio Horloge Baby-G BGA-180

Lees hieronder de 📖 handleiding in het Nederlandse voor Casio Baby-G BGA-180 (7 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Operation Guide 5381/5482
E-9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-61
Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-63
Speci cations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-64
E-8
Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52
To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52
To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-53
To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-54
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-54
Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-55
To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-55
To change the Illumination Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-55
Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-57
To adjust hand positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-57
Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-59
To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-59
E-7
Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46
To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46
To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47
To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47
To measure two fi nishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-49
To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-49
To con gure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-50
To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-51
To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-51
E-6
Thermometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25
To take a temperature reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25
To switch a temperature reading unit between Celsius (°C) and
Fahrenheit (°F) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26
Checking Tide Levels and Moon Ages (Tide/Moon) . . . . . . . . . . . . . . . . . . . . E-31
Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-41
Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-42
To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43
To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43
To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-44
To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-45
E-5
Contents
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3
Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4
Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-10
Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17
Confi guring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
To con gure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-20
Adjusting the Current Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . E-21
To con gure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-21
E-4
Things to check before using the watch
1. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City settings” (page E-18) to con gure
your Home City and daylight saving time settings.
Important!
x Proper World Time Mode data depend on correct Home City, time, and date
settings in the Timekeeping Mode. Make sure you configure these settings
correctly.
2. Set the current time.
x See “Adjusting the Current Time and Date Settings” (page E-21).
The watch is now ready for use.
E-3
About This Manual
x The operational procedures for Modules 5381 and 5482 are identical. All of the
illustrations in this manual show Module 5381.
x Depending on the model of your watch, display text appears either as dark gures
on a light background, or light gures on a dark background. All sample displays in
this manual are shown using dark gures on a light background.
x Button operations are indicated using the letters shown in the illustration.
x Note that the product illustrations in this manual are intended for reference only,
and so the actual product may appear somewhat different than depicted by an
illustration.
Module 5381 Module 5482
E-2
Warning!
x The measurement functions built into this watch are not intended for taking
measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonable representations only.
x Note that the tide and Moon data calculated by this watch are approximate and
are intended as general information only. Never try to use it for marine navigation
or any other purposes requiring accurate measurements.
x Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of your
watch or its malfunction.
E-1
ENGLISH
Congratulations upon your selection of this CASIO watch.
MA1601-EA © 2014 CASIO COMPUTER CO., LTD.
Operation Guide 5381/5482
E-19
3. After the setting is the way you want, press to return to the Timekeeping A
Mode.
Note
x After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-18
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To con gure Home City settings
1. In the Timekeeping Mode, hold down until AADJ
appears.
x This indicates the city code setting mode.
x The hour and minute hands automatically move out of
the way at this time (page E-15).
2. Press (East) and (West) to select the city codeD B
you want to use as your Home City.
x Keep pressing or until the city code you wantD B
to select as your Home City appears on the display.
x For details about city codes, see the “City Code
Table” at the back of this manual.
City Code
E-17
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
x Each press of A cycles the digital display contents as
shown below.
Month-Day Day of the Week Seconds Hour : Minutes
AAA
PM indicator
A
Hour
Month-Day
Minutes
Tide indicator
(Page E-32)
E-16
2. Holding down again as you press will cause the hands to return to their B C
normal positions (normal timekeeping).
Note
x This operation can be performed in any mode. In the case of a setting mode
(setting fl ashing on the screen), the hands will move out of the way automatically,
even if you do not perform the above operation.
x Watch button functions are the same regardless of whether the hands are move
out of the way or at their normal positions.
x Changing to another mode will cause the hands to move back to their normal
positions.
x The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-15
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
1. While holding down , press B C.
x This will cause the hour and minute hands to move to a location where they do
not block your view of the tide indicator and/or digital display.
Example: When the current time is 8:20
Flashes while the hands are moved out of the way.
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
x Auto Return Features
The watch will automatically return to the Timekeeping Mode if you do not perform
any operation for a certain amount of time, as described below.
Mode Approximate Elapsed Time
Thermometer, Alarm, Tide/Moon
2 to 3 minutes
Time or other setting mode
(information fl ashing on the display)
Tide Change After the tide change indication process is complete
x Scrolling
The and buttons are used on the setting mode to scroll through data on the B D
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-13
Stopwatch Mode
Countdown Timer
Mode
World Time Mode
Alarm Mode
C
Counter Mode Tide/Moon Mode
C C
CCC
E-12
Selecting a Mode
x Press C to cycle between the modes as shown below.
x To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
x In any mode (except a setting mode), press to illuminate the display.B
Timekeeping Mode
C
D
Thermometer
Mode
Tide Change
Mode
C
D*
* The mode that appears rst is the one that was selected when you last used the Thermometer
or Tide Change mode.
E-11
To do this: Enter this mode: See:
Use the stopwatch to measure elapsed time Stopwatch Mode E-46
Use the countdown timer Countdown Timer Mode E-49
Set an alarm time Alarm Mode E-52
E-10
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
x View the current date in the Home City
x Confi gure Home City and daylight saving time (DST)
settings
x Confi gure time and date settings
x View the current tide level
Timekeeping Mode E-17
Take temperature readings Thermometer Mode E-25
View tide changes over the next 12 hours Tide Change Mode E-33
Count objects Counter Mode E-41
View tide level and moon age for a specifi ed date
and time Tide/Moon Mode E-35
View the current time in one of 48 cities
(31 time zones) around the globe World Time Mode E-42
Operation Guide 5381/5482
E-29
1. Enter the Thermometer Mode (page E-12).
2. Hold down for at least two seconds until the temperature A
value disappears from the display.
x When you release the temperature value will start to A ash.
x The hour and minute hands automatically move out of the way at
this time (page E-15).
3. Use (+) and (–) to calibrate the temperature value.D B
Calibration unit: 0.1°C (or 0.2°F)
Calibration range: –10.0 to 60.0°C (or 14.0 to 140.0°F)
Important!
x To cancel a temperature reading correction setting, hold down and at theD B
same time. The watch will beep.
4. Press to return to the Thermometer Mode.A
E-28
Correcting the Temperature Reading
The temperature sensor of this watch is adjusted at the factory and so further
adjustment is not required by you. However, if you notice that the readings
produced by the watch are different from readings produced by another instrument,
you can use the procedure in this section to make corrections. You also can use
this procedure to clear a correction.
Important!
x The watch will not be able to produce correct temperature readings if you make a
mistake during the correction procedure. Check to make sure that the value you
use for correction produces correct temperature readings.
x Before performing the following procedure, remove the watch from your wrist and
leave it for about 20 or 30 minutes to allow the case temperature to become the
same as the air temperature.
E-27
3. Press C.
x This will cause the current measurement
unit to fl ash.
4. Use to select the measurement unit you D
want.
5. Press to return to the Thermometer Mode.A
Important!
x When ( ) is selected as the Home City, the temperature unit is setTYO TOKYO
automatically to Celsius (°C). These settings cannot be changed.
D
E-26
Measurement unit: 0.1°C (or 0.2°F)
Measurement range*: –10.0 to 60.0°C (or 14.0 to 140.0°F)
* - -.- is displayed in place of the temperature when reading is outside the allowable
range.
2. Press to return to the Timekeeping Mode.C
To switch a temperature reading unit between Celsius (°C) and Fahrenheit (°F)
1. Enter the Thermometer Mode (page E-12).
2. Hold down for at least two seconds until the temperature value disappears A
from the display.
x When you release the temperature value will start to A ash.
x The hour and minute hands automatically move out of the way at this time (page
E-15).
E-25
Thermometer
This watch uses a temperature sensor to take temperature readings.
x You can select either Celsius (°C) or Fahrenheit (°F) as the temperature
measurement unit (page E-26).
To take a temperature reading
1. In the Timekeeping Mode, press . This will enter theD
Thermometer Mode, which is indicated by on TEMP
the display.
x If does not appear when you press TEMP D, press
it again (page E-12).
x The temperature reading will appear about one
second after TEMP.
x The reading is updated at ve-second intervals for two
to three minutes. After that, the watch automatically
returns to the Timekeeping Mode.
Temperature
E-24
Note
x Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
E-23
3. When the timekeeping setting you want to change is fl ashing, use D and/or B
to change it as described below.
Screen To do this: Do this:
Toggle between 12-hour ( ) and 24-hour 12H
(24H) timekeeping Press D.
Reset the seconds to 00 Press D.
Change the hour or minute Use (+) and (–).D B
Change the year Use (+) and (–).D B
Change the month or day Use (+) and (–).D B
4. Press to exit the setting mode.A
E-22
2. Press to move the fl ashing in the sequence shown below to select the other C
settings.
City Code
(page E-18)
CDST
(page E-20)
C
12/24-Hour Format
C
Seconds
C
CHour
C
Illumination Duration
(page E-55) Minutes
C C
Button Operation Tone On/Off
(page E-59) C
Day
C
Month
C
Year
E-21
Adjusting the Current Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
Changing the digital time should cause the analog time setting to change
accordingly.
To confi gure the digital time and date settings
1. In the Timekeeping Mode, hold down until AADJ
appears.
x This indicates the city code setting mode.
x The hour and minute hands automatically move out of
the way at this time (page E-15).
E-20
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down until AADJ
appears.
x This indicates the city code setting mode.
x The hour and minute hands automatically move out of
the way at this time (page E-15).
2. Press to display the DST setting mode.C
3. Press to toggle between Daylight Saving Time (DON)
and Standard Time ( ).OFF
x Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press to A
return to the Timekeeping Mode.
x The indicator appears to indicate that DaylightDST
Saving Time is turned on.
DST indicator


Product specificaties

Merk: Casio
Categorie: Horloge
Model: Baby-G BGA-180

Heb je hulp nodig?

Als je hulp nodig hebt met Casio Baby-G BGA-180 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Casio

Handleiding Horloge

Nieuwste handleidingen voor Horloge