Casio 5255 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Casio 5255 (6 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
Operation Guide 5255
MO1111-EA
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
•Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
E-2
•Button operations are indicated using the letters shown in the illustration.
•Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-25
World Time ............................................................................................................. E-29
Alarms .................................................................................................................... E-33
Illumination ............................................................................................................ E-38
Hand Home Position Correction .......................................................................... E-42
Reference .............................................................................................................. E-44
Specifications ....................................................................................................... E-48
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To change the Daylight Saving Time (summer time) setting ............................ E-12
To specify a distance value .................................................................................. E-16
To specify lap time or split time readings .......................................................... E-18
To perform elapsed time measurement .............................................................. E-19
To set up the stopwatch to take lap time readings ............................................ E-20
To perform a lap time measurement ................................................................... E-21
To set up the stopwatch to take split time readings .......................................... E-22
To perform a split time measurement ................................................................. E-23
To measure times with the stopwatch ................................................................ E-24
E-5
To use the countdown timer ................................................................................ E-26
To configure countdown start time and auto-repeat settings .......................... E-27
To view the current time in another time zone ................................................... E-30
To toggle a city code time between Standard Time and
Daylight Saving Time ...................................................................................... E-31
To swap your Home City and World Time City ................................................... E-32
To set an alarm time ............................................................................................. E-34
To turn an alarm on and off .................................................................................. E-36
To turn the Hourly Time Signal on and off .......................................................... E-37
To illuminate the display manually ...................................................................... E-38
To specify the illumination duration ................................................................... E-39
To turn the auto light switch on and off .............................................................. E-41
To adjust home positions ..................................................................................... E-42
E-6
General Guide
•Press C to change from mode to mode.
•In any mode (except a setting mode), press B to illuminate the display.
Timekeeping Mode
C
▲
C
E-7
Alarm Mode (page E-33)
Countdown Timer Mode (page E-25)
World Time Mode (page E-29)
Stopwatch Mode (page E-14)
▲
▲
▲
▲
C
C
C
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
•Pressing D in the Timekeeping Mode will toggle lower display between the screens
shown below.
D
Home City Date Home City Time
▲
▲
Date Seconds
Day of the week
Hour : Minutes
Seconds
PM indicator
Day of the week
E-9
To set the time and date
1. In the Timekeeping Mode, hold down A for about three
seconds until the city code flashes on the upper display.
This is the setting mode.
2. Use D and B to select the city code you want.
•Make sure you select your Home City code before
changing any other setting.
•For full information on city codes, see the “City Code
Table” at the back of this manual.
City code
Hour : Minutes
Seconds
PM indicator
Operation Guide 5255
E-10
3. Press C to change the flashing screen content in the sequence shown below to
select the other setting.
Seconds
12/24-Hour
Format Hour
Minutes
DST
Month Ye a r
City Code
Day
Illumination
Duration
C C
C C C C
CCCC
4. When the timekeeping setting you want to change is flashing, use D or toB
change it as described below.
Change the city code
Toggle the DST setting between
Daylight Saving Time ( ) and
Standard Time ( ).
Use D (east) and B
(west).
Press D.
Screen: To do this: Do this:
E-11
5. Press A to exit the setting mode.
•The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
Screen: To do this: Do this:
Toggle between 12-hour ( ) and
24-hour ( ) timekeeping
Reset the seconds to
Change the hour and minutes
Change the year, month, or day
Toggle the display illumination
duration between 1.5 seconds ( )
and three seconds ( )
Press D.
Press D.
Use D (+) and B (–).
Press D.
E-12
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A for about three
seconds until the city code flashes on the upper display.
This is the setting mode.
2. Press C. This will display the DST setting screen.
3. Use D to toggle the DST setting on and off.
DST off ( ) DST on ( )
D
•The default DST setting is OFF ( ).
4. When the setting you want is selected, press A to exit
the setting mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
E-13
12-hour and 24-hour timekeeping
•With the 12-hour format, the PM indicator appears on the lower display for times in
the range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
•With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
the PM indicator.
•The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
E-14
Stopwatch
You can use the stopwatch to measure elapsed time, lap
times and split times. If you specify a distance value, the
stopwatch also will calculate and display speeds.
•The digital display range of the stopwatch is 99 hours,
59 minutes, 59.999 seconds. The stopwatch continues
to run until you stop it. If it reaches the above limit, it will
restart the time measurement from zero.
•The stopwatch operation continues even if you exit the
Stopwatch Mode. If you exit the Stopwatch Mode while a
stopwatch operation is in progress, the segments of the
speed indicator will appear and disappear sequentially
as stopwatch seconds are counted.
•All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-7).
Speed hand
E-15
Important!
•Check to make sure that the speed hand is not moving before you perform any
Stopwatch Mode button operation.
Specifying a Distance Value
You can use the procedure below to specify a distance value, if you want. If you
specify a distance value, the watch will calculate and indicate speed for certain
stopwatch operations.
•The distance value represents kilometers, miles, or any other distance unit you want.
Specifying a distance value of 10.0, for example, can mean 10.0 kilometers or 10.0
miles.
•No speed calculation is performed when 0.0 is specified as the current distance
value.
•For lap time readings, you can specify either the lap distance (when all the laps are
the same distance) or the total race distance.
•For split time readings, you can specify the total race distance only. Though the
watch will indicate a speed each time you take a split reading, they will be based on
the total race distance, and so they will not indicate actual intermediate split speeds.
E-16
To specify a distance value
1. In the Stopwatch Mode, make sure the stopwatch is
stopped and reset to all zeros.
•If you need to reset the stopwatch to all zeros, press A.
2. Hold down A for about three seconds until the watch
beeps, DIST ( ) appears in the upper display, and
the left digit of the current distance value setting flashes
in the lower display.
•This is the distance value setting mode.
3. Press C to move the flashing between the values on
the left side and right side of the distance value digit
decimal point.
4. While either the left or right distance value is flashing,
use D (+) and B (–) to change it.
•You can specify a distance value in the range of 0.1 to
99.9.
5. After specifying the distance value you want, press A
to exit the setting mode.
E-17
How speed is indicated
•While an elapsed time measurement operation is being
performed in the Stopwatch Mode, the watch will display
a speed value, which is calculated based on the
distance you specified and the elapsed time. The speed
is indicated by the speed indicator (100 to 1000) on the
left and the speed hand on the right.
•The speed indicator indicates the 100s digit value.
•1000 is indicated when the speed exceeds 1,000.
•The speed hand indicates 10s digit value.
Example:
At a speed of 1,740, a pointer appears next to 1000 in the
speed indicator.
The speed indicator on the left indicates 700.
The speed hand on the right indicates 40.
•Speed can be indicated from 0 to 1998. OVER is
indicated by the speed hand when the speed exceeds
1998.
Speed handSpeed
indicator
OVER
Speed (1000)
E-18
Time Measurement
You need to specify either lap time (page E-20) or split time (page E-22) measurement
before you start a stopwatch operation.
•If you want to measure total elapsed time, select split time measurement.
To specify lap time or split time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
•Make sure that (lap times) or (split times) is shown in the lower display.
•If you need to reset the stopwatch to all zeros, press A.
2. Press A to toggle between (lap times) and (split times) in the lower
display.
▲
▲
A
E-19
Elapsed Time Measurement
Use the following procedure to measure elapsed time, without taking lap time or split
time readings.
To perform elapsed time measurement
Select split time ( ) measurement and then perform the following button operations.
D D A Start ➝ Stop ➝ Reset
•If you have a distance value (page E-15) specified for the current elapsed time
measurement, the speed indicator on the left and the speed hand on the right will
indicate the overall speed when you press D to stop the elapsed time operation.
•After pressing D D to stop an elapsed time operation, you could press again to
restart from the point where you left off.
Operation Guide 5255
E-20
Lap Time
A lap time reading shows the time elapsed since the last
lap time reading was taken.
•If you want the watch to calculate the speed of each lap
(when all of the laps are the same distance), specify the
lap distance for the distance setting (page E-15).
•If you want the watch to calculate the speed of the entire
race, specify the race distance for the distance setting
(page E-15). A speed will be indicated each time you
take a lap reading, but these lap speeds will not indicate
actual speed of the entire race.
To set up the stopwatch to take lap time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
•If you need to reset the stopwatch to all zeros, press A.
2. Make sure that (lap times) is shown in the lower display.
•If (split times) is displayed, press A to toggle it to .
Lap time
E-21
To perform a lap time measurement
Select lap time ( ) measurement and then perform the
following button operations.
D A A Start ➝ Lap* ➝ Lap* ➝
D A Stop ➝ Reset
* The lap time is released automatically in about 12
seconds.
•You can press A to take lap readings as many times as
you like.
•A lap number (#01 through #99) alternates with the lap
hour value in the upper display while a lap time reading
is displayed. If you take more than 99 lap readings, the
lap number will restart from following lap #00 #99.
•Pressing D to stop elapsed time measurement displays
the time (and speed if a distance is specified) of the final
lap.
Speed (calculated)
Minutes Seconds
1/1000 seconds
Lap number
E-22
Split Time
A split time reading shows the time elapsed since the
beginning of the current time measurement.
•If you want the watch to calculate the speed of the race,
specify the race distance for the distance setting (page
E-15).
•For split time readings, you can specify the total race
distance only. Though the watch will indicate a speed
each time you take a split reading, they will be based on
the total race distance, and so they will not indicate
actual intermediate split speeds.
To set up the stopwatch to take split time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
•If you need to reset the stopwatch to all zeros, press A.
2. Make sure that (split times) is shown in the lower display.
•If (lap times) is displayed, press to toggle it to A.
Split time
E-23
To perform a split time measurement
Select split time ( ) measurement and then perform
the following button operations.
D A A Start ➝ Split ➝ Split Release* ➝
D A Stop ➝ Reset
* The split time is released automatically if you do not
press A within about 12 seconds.
•You can press A to take split readings as many times
as you like.
•The stopwatch continues elapsed time measurement
internally while a split time reading is displayed.
Pressing A to release the split will switch the lower
display to the elapsed time measurement, or you also
could press to stop elapsed time measurementD
instead.
•Pressing D to stop elapsed time measurement displays
the time (and speed if a distance is specified) of the final
split (which is the overall elapsed time).
Hour
Speed (calculated)
Minutes Seconds
1/1000 seconds
E-24
To measure times with the stopwatch
Elapsed Time
Lap Time
Split Time
D
Start Stop Reset
D
➤ ➤ A
D
Start
( displayed)
Split Split release Stop
A DA
➤ ➤ ➤
Reset
A
➤
D
Start
( displayed)
Lap
(Lap01)
Stop Reset
D AA
➤ ➤ ➤
A➤
Lap
(Lap02)
E-25
Countdown Timer
You can set the countdown timer start time within a range
of one minute to 24 hours. An alarm sounds when the
countdown reaches zero.
•You also can select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
•All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Auto-repeat off
Start time
(Hours : Minutes)
Seconds
E-26
To use the countdown timer
Press while in the Countdown Timer Mode to start the countdown timer.D
•When the end of the countdown is reached, the alarm will sound for 10 seconds or
until you stop it by pressing any button.
•The countdown time is reset to its starting value automatically after the alarm stops
if auto-repeat is turned off.
•When auto-repeat is turned on, the countdown will restart automatically without
pausing when it reaches zero.
•The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
•Press D while a countdown operation is in progress to pause it.
Press D again to resume the countdown.
•To stop a countdown timer operation completely, first pause it (by pressing D), and
then press . This returns the countdown time to its starting value.A
E-27
To configure countdown start time and auto-repeat settings
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A for about three
seconds until the hour setting of the countdown start
time starts to flash. This is the setting mode.
•If the countdown start time is not displayed, use the
procedure under “To use the countdown timer” (page
E-26) to display it.
2. Press C to move the flashing in the sequence shown
below, and select the setting you want to change.
Start Time
(Minutes)
Auto-Repeat
On/Off
Start Time
(Hours)
CC
C
3. Perform the following operations, depending on which setting currently is selected
on the display.
•While the start time setting is flashing, use D B (+) and (–) to change it.
•While the auto-repeat on/off setting is flashing on the display, press D to toggle
auto-repeat on ( ) and off ( ).
Start time
(Hours : Minutes)
Auto-repeat on
E-28
4. Press A to exit the setting mode.
•The auto-repeat on ( ) is displayed on the Countdown Timer Mode screen while
this function is turned on.
E-29
World Time
World Time digitally displays the current time in one of
48 cities (29 time zones) around the world. A simple
operation swaps your Home City with the currently
selected World Time City.
•The times kept in the World Time Mode are
synchronized with the time being kept in the
Timekeeping Mode. If you feel that there is an error in
any World Time Mode time, check to make sure you
have the correct city selected as your Home City. Also
check to make sure that the current time as shown in
the Timekeeping Mode is correct.
•Times in the World Time Mode are based on UTC
offsets. See the “City Code Table” at the back of this
manual for information about the UTC offsets that are
supported.
•All of the operations in this section are performed in the World Time Mode, which
you enter by pressing (page E-7).C
Currently selected
World Time City
World Time
Product specificaties
| Merk: | Casio |
| Categorie: | Horloge |
| Model: | 5255 |
Heb je hulp nodig?
Als je hulp nodig hebt met Casio 5255 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Horloge Casio
28 Oktober 2024
20 September 2024
20 Augustus 2024
6 Augustus 2024
21 Juli 2024
21 Juli 2024
21 Juli 2024
20 Juni 2024
24 Mei 2024
23 Mei 2024
Handleiding Horloge
- Horloge Braun
- Horloge IKEA
- Horloge Epson
- Horloge Huawei
- Horloge Garmin
- Horloge Medion
- Horloge Topcom
- Horloge Ade
- Horloge Adidas
- Horloge Alessi
- Horloge Alpina
- Horloge Armani
- Horloge Ascot
- Horloge Asics
- Horloge Auriol
- Horloge Beper
- Horloge BML
- Horloge Boss
- Horloge Bruno Sohnle
- Horloge Bulova
- Horloge Bushnell
- Horloge Dakota
- Horloge Danish Design
- Horloge Davis
- Horloge Detomaso
- Horloge Diesel
- Horloge Digi-tech
- Horloge Easypix
- Horloge Ebel
- Horloge Edox
- Horloge ELYSEE
- Horloge ESQ
- Horloge ETA
- Horloge Eurochron
- Horloge Ferrari
- Horloge Festina
- Horloge Fila
- Horloge Fitbit
- Horloge Fossil
- Horloge Freestyle
- Horloge GC Watches
- Horloge Geemarc
- Horloge Guess
- Horloge Habitat
- Horloge Haffstreuner
- Horloge Hamilton
- Horloge Hugo Boss
- Horloge ICE Watch
- Horloge Inter-Quartz
- Horloge Invicta
- Horloge Irox
- Horloge Kalenji
- Horloge Karlsson
- Horloge Kogan
- Horloge Krontaler
- Horloge La Crosse
- Horloge Lacoste
- Horloge Lambretta
- Horloge Longines
- Horloge Lorus
- Horloge Lotus
- Horloge Lynx
- Horloge Marc Jacobs
- Horloge Marquant
- Horloge Meister Anker
- Horloge Michael Kors
- Horloge Misfit
- Horloge Mitsubishi
- Horloge Mondaine
- Horloge Movado
- Horloge Naitica
- Horloge Naviforce
- Horloge Nedis
- Horloge Nike
- Horloge Polar
- Horloge Pulsar
- Horloge Pyle
- Horloge QQ
- Horloge Rado
- Horloge Renkforce
- Horloge Rodania
- Horloge Rolex
- Horloge Ronda
- Horloge Seiko
- Horloge Sempre
- Horloge Sinn
- Horloge Skmei
- Horloge Slazenger
- Horloge Speedo
- Horloge Spinnaker
- Horloge Stuhrling
- Horloge Suunto
- Horloge Swatch
- Horloge Tauchmeister
- Horloge TCM
- Horloge Technaxx
- Horloge Ticwatch
- Horloge Timer
- Horloge TimeStyle
- Horloge Timex
- Horloge Tissot
- Horloge Tommy Hilfiger
- Horloge TomTom
- Horloge Torgoen
- Horloge TW Steel
- Horloge Uri Minkoff
- Horloge Velleman
- Horloge Westfalia
- Horloge World Timer Chronograph
- Horloge Xonix
- Horloge Jaguar
- Horloge Junghans
- Horloge Just
- Horloge Olivia Burton
- Horloge Omega
- Horloge Oregon Scientific
- Horloge Orient
- Horloge Clas Ohlson
- Horloge Crivit
- Horloge Zenith
- Horloge Citizen
- Horloge Prologue
- Horloge Swiza
- Horloge Victorinox
- Horloge Bering
- Horloge Breitling
- Horloge Breo
- Horloge Brera
- Horloge Calypso
- Horloge Certina
- Horloge Christiaan Van Der Klaauw
- Horloge Christopher Ward
- Horloge Cover
- Horloge Daniel Steiger
- Horloge DMC
- Horloge Dugena
- Horloge Executive
- Horloge Fromanteel
- Horloge Gant
- Horloge Gc
- Horloge Girard-Perregaux
- Horloge Holzkern
- Horloge Hublot
- Horloge HYT
- Horloge IWC
- Horloge Jacques Lemans
- Horloge Klaus Kobec
- Horloge Lars Larsen
- Horloge Lucien Picard
- Horloge Luminox
- Horloge Maurice Lacroix
- Horloge Nautica
- Horloge Obaku
- Horloge Philip Watch
- Horloge Pilgrim
- Horloge Puma
- Horloge Shinola
- Horloge Skagen
- Horloge So & Co
- Horloge Tikkers
- Horloge Timberland
- Horloge TMI
- Horloge Triwa
- Horloge Tudor
- Horloge Versace
- Horloge WoodWatch
- Horloge Leff
- Horloge ETT
- Horloge Emporio Armani
- Horloge La Crosse Technology
- Horloge Spin Master
- Horloge Raketa
- Horloge Balmain
- Horloge Audemars Piguet
- Horloge Wonky Monkey
- Horloge Iron Annie
- Horloge Julie Julsen
- Horloge KRAEK
- Horloge X-WATCH
- Horloge PAUL HEWITT
- Horloge MICHELE
- Horloge Radley London
- Horloge PANERAI
- Horloge Zeppelin
- Horloge Hype
- Horloge Grand Seiko
Nieuwste handleidingen voor Horloge
16 November 2024
15 November 2024
15 November 2024
15 November 2024
15 November 2024
15 November 2024
15 November 2024
15 November 2024
14 November 2024
14 November 2024