Canon LV-7320 Handleiding

Canon Beamer LV-7320

Lees hieronder de 📖 handleiding in het Nederlandse voor Canon LV-7320 (40 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

English

Multimedia Projector

Owner’s Manual

LV-7320U

INFORMATION TO THE USER

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

As the owner of a new Multimedia Projector, you are probably eager to try out your new projector. Before you do,

we suggest that your spend a little time reading this manual to familiarize yourself with the operating procedures so

that you will receive maximum satisfaction from the many features included in your new projector.

This owner's manual will acquaint you with your projector's features. Reading it will help us too. Through the

years, we have found that many service requests were not caused by problems with our projectors. They were

caused by problems that could have been prevented, if the owner had followed the instructions in the manual.

You can often correct operating problems yourself. If your projector fails to work properly, see

"TROUBLESHOOTING" section on pages 35 ~ 36 and try the solution marked for each problem.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

This Projector has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit

into the power outlet. Do not try to defeat this safety feature.

This projector produces intense light from the projection lens. Do not stare directly into the lens as

possible eye damage could result. Be especially careful that children do not stare directly into the beam.

The Remote Control Unit, supplied to this projector, emits the laser beam as the Laser Pointer function

from the Laser Light Window while pressing the LASER button (for 1 minute). Do not look into the Laser

Light Window or shine the laser beam on yourself or other people. Eye damage may result.

This projector should be set in the way indicated. If not, It may result in fire hazard.

If the projector will not be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE CONSTITUTING

A RISK OF ELECTRIC SHOCK IS

PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE

ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE

OWNER'S MANUAL WITH THIS UNIT.

TO THE OWNER

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should be read before

the product is operated.

Read all of the instructions given here and retain them for later

use. Unplug this projector from AC power supply before

cleaning. Do not use liquid or aerosol cleaners. Use a damp

cloth for cleaning.

Do not use attachments not recommended by the

manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table.

The projector may fall, causing serious injury to a child or

adult, and serious damage to the projector. Use only with a

cart or stand recommended by the manufacturer, or sold with

the projector. Wall or shelf mounting should follow the

manufacturer's instructions, and should use a mounting kit

approved by the manufacturer.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Slots and openings in the back and bottom of the cabinet are

provided for ventilation, to insure reliable operation of the

equipment and to protect it from overheating.

The openings should never be covered with cloth or other

materials, and the bottom opening should not be blocked by

placing the projector on a bed, sofa, rug, or other similar

surface. This projector should never be placed near or over a

radiator or heat register.

This projector should not be placed in a built-in installation

such as a book case unless proper ventilation is provided.

This projector should be operated only from the type of power

source indicated on the marking label. If you are not sure of

the type of power supplied, consult your authorized dealer or

local power company.

Do not overload wall outlets and extension cords as this can

result in fire or electric shock. Do not allow anything to rest on

the power cord. Do not locate this projector where the cord

may be damaged by persons walking on it.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the projector.

Do not attempt to service this projector yourself as opening or

removing covers may expose you to dangerous voltage or

other hazards. Refer all servicing to qualified service

personnel.

Unplug this projector from wall outlet and refer servicing to

qualified service personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been

damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer that have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask

the service technician to perform routine safety checks to

determine that the projector is in safe operating condition.

This projector is equipped with a

grounding type AC line plug.

Should you be unable to insert the

plug into the outlet, contact your

electrician. Do not defeat the

safety purpose of this grounding

type plug.

Follow all warnings and instructions marked on the projectors.

For added protection to the projector during a lightning storm,

or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet. This will prevent damage

due to lightning and power line surges.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

If the projector is to be built into a compartment or similarly

enclosed, the minimum distances must be maintained.

Do not cover the ventilation slot on the projector.

Heat build-up can reduce the service life of your projector, and

can also be dangerous.

GROUND

20cm

50cm 50cm 50cm

PROJECTOR

(FRONT)

PROJECTOR

(SIDE)

WALL

Product specificaties

Merk:	Canon
Categorie:	Beamer
Model:	LV-7320
Kleur van het product:	Blue, Grey
Ingebouwd display:	Nee
Gewicht:	4200 g
Breedte:	240 mm
Diepte:	336 mm
Hoogte:	93 mm
Geluidsniveau:	- dB
Gebruikershandleiding:	Ja
Aantal lampen:	1 lampen
Soort lamp:	UHP
Stroombron:	AC
Plaatsing:	Desktop
Oorspronkelijke beeldverhouding:	4:3
Ethernet LAN:	Nee
Geïntegreerde geheugenkaartlezer:	Nee
Typische contrastverhouding:	250:1
Zoomcapaciteit:	Ja
Projector helderheid:	1250 ANSI lumens
Projectietechnologie:	3LCD
Projector native resolution:	XGA (1024x768)
Geschikt voor schermmaten:	31 - 300 "
Projectie-afstand objectief:	1.4 - 14 m
Aantal kleuren:	16.78 miljoen kleuren
Frequentiebereik horizontaal:	15 - 100 kHz
Frequentiebereik verticaal:	50 - 100 Hz
Matrix grootte:	0.9 "
VGA (D-Sub)poort(en):	2
S-Video ingang:	1
Focus:	Handmatig
Zoom type:	Auto
Diafragma (F-F):	1.7 - 2
Brandpuntbereik:	33 - 43 mm
Levensduur van de lichtbron:	- uur
Type lichtbron:	Lamp
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	1 W
Aantal ingebouwde luidsprekers:	1
Stroomverbruik (in standby):	- W
Hoofdtelefoonuitgangen:	1
Ondersteunde beeldverhoudingen:	4:3
Formaat analoog signaal:	NTSC, PAL, SECAM
Volledige HD:	Nee
Ingang stroom:	Ja
3D:	Nee
Lampvermogen:	150 W
Ondersteunde grafische resoluties:	1024 x 768 (XGA)
PC-ingang (D-Sub):	Ja
Matrix type:	3-panel (p-Si TFT actief)
Afstandsbediening inbegrepen:	Nee
Wifi:	Nee
AC-ingangsspanning:	100 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	240 W
Bedrijfstemperatuur (T-T):	5 - 35 °C
Type product:	Projector met normale projectieafstand