Cameo HydraBeam 4000 Handleiding

Cameo Verlichting HydraBeam 4000

Lees hieronder de 📖 handleiding in het Nederlandse voor Cameo HydraBeam 4000 (64 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/64
4 HEAD MOVING BAR HYDRABEAM 4000
CLHB4000RGBW
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5
OPERATION 6-8
INSTALLATION 8
DMX TECHNOLOGY 9
TECHNICAL DATA 10
MANUFACTURER’S DECLARATIONS 10-14
DMX CONTROL 57-62
DEUTSCH
SICHERHEITSHINWEISE 12-13
EINFÜHRUNG 13
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 14
BEDIENUNG 15-17
AUFSTELLUNG UND MONTAGE 17
DMX TECHNIK 18
TECHNISCHE DATEN 19
HERSTELLERERKLÄRUNGEN 19-20
DMX STEUERUNG 57-62
FRANCAIS
MESURES PRÉVENTIVES 21-22
INTRODUCTION 22
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 23
UTILISATION 24-26
INSTALLATION ET MONTAGE 26
TECHNOLOGIE DMX 27
CARACTÉRISTIQUES TECHNIQUES 28
DÉCLARATIONS DU FABRICANT 28-29
PILOTAGE EN MODE DMX 57-62
ESPAÑOL
MEDIDAS DE SEGURIDAD 30-31
INTRODUCCIÓN 31
CONEXIONES Y ELEMENTOS DE MANDO Y VISUALIZACIÓN 32
FUNCIONAMIENTO 33-35
INSTALACIÓN Y MONTAJE 35
TECNOLOGÍA DMX 36
DATOS TÉCNICOS 37
DECLARACIONES DEL FABRICANTE 37-38
CONTROL DMX 57-62
POLSKI
ŚRODKI OSTROŻNOŚCI 39-40
WPROWADZENIE 40-41
PRZYŁĄCZA, ELEMENTY OBSŁUGOWE I WSKAŹNIKOWE 41
OBSŁUGA 42-44
USTAWIANIE I MONTAŻ 44
TECHNIKA DMX 45
DANE TECHNICZNE 46
OŚWIADCZENIA PRODUCENTA 46-47
STEROWANIE DMX 57-62
ITALIANO
MISURE PRECAUZIONALI 50-51
INTRODUZIONE 49
CONNESSIONI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 50
UTILIZZO 51-53
INSTALLAZIONE E MONTAGGIO 53
TECNOLOGIA DMX 54
DATI TECNICI 55
DICHIARAZIONI DEL PRODUTTORE 55-56
CONTROLLO DMX 57-62
ITALIANOPOLSKIESPAÑOL
FRANCAISDEUTSCHENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is always
installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Keep a minimum distance of 20 cm around and above the device.
12. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the
special instructions noted below. Do not expose this equipment to flammable materials, fluids or gases. Avoid direct sunlight!
13. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
14. Make certain that objects cannot fall into the device.
15. Use this equipment only with the accessories recommended and intended by the manufacturer.
16. Do not open or modify this equipment.
17. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
18. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
19. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in anot
her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by
authorized, qualified personnel.
20. Clean the equipment using a dry cloth.
21. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
22. Plastic bags must be kept out of reach of children.
23. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority
to operate the equipment.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
24. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
25. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
26. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
27. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
28. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
29. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
30. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
31. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
32. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
33. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
34. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
35. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
36. Please keep a distance of at least 0.5 m to any combustible materials.
37. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT connection

Product specificaties

Merk: Cameo
Categorie: Verlichting
Model: HydraBeam 4000

Heb je hulp nodig?

Als je hulp nodig hebt met Cameo HydraBeam 4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Cameo

Cameo

Cameo PIXBAR SMD IP G2 Handleiding

16 April 2024
Cameo

Cameo ZENIT W300 Handleiding

9 Juli 2023
Cameo

Cameo ZENIT W600 Handleiding

8 Juli 2023
Cameo

Cameo ZENIT W600 TW Handleiding

6 Juli 2023
Cameo

Cameo ZENIT Z120 G2 Handleiding

5 Juli 2023
Cameo

Cameo Q SPOT 15 RGBW Handleiding

28 Juni 2023
Cameo

Cameo CLSuperfly HP Derby Handleiding

16 Juni 2023
Cameo

Cameo ThunderWash 600 UV Handleiding

15 Juni 2023
Cameo

Cameo Control 6 Handleiding

14 Juni 2023
Cameo

Cameo CLMPARFOOTPLUS Handleiding

11 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Kogan

Kogan KAABLGTBARD Handleiding

23 December 2024
Kogan

Kogan KASMCRTNLTA Handleiding

23 December 2024
LumenRadio

LumenRadio CRMX Galileo MAX Handleiding

21 December 2024
Showtec

Showtec Performer Fresnel 2200 DDT Handleiding

21 December 2024
Showtec

Showtec AirDrive 2.4 IP Handleiding

21 December 2024
Bosch

Bosch FSN 1400 Set Professional Handleiding

21 December 2024
Neewer

Neewer VL66C Handleiding

18 December 2024
American DJ

American DJ ENCORE LB15IP Handleiding

18 December 2024
American DJ

American DJ ENCORE LP12IP Handleiding

18 December 2024
Wiesenfield

Wiesenfield UNI-LP-100 Handleiding

17 December 2024