Cameo F4 T Handleiding

Cameo Lamp F4 T

Lees hieronder de 📖 handleiding in het Nederlandse voor Cameo F4 T (72 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/72
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
F4 D
DAYLIGHT LED FRESNEL SPOT LIGHT
CLF4D
F4 T
TUNGSTEN LED FRESNEL SPOT LIGHT
CLF4T
V1.10
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5
OPERATION 6
INSTALLATION 10
INSTALLATION / DISASSEMBLY OF BARN DOOR AND
FILTER FRAME / CLEANING OF LENSES 10
DMX TECHNOLOGY 11
TECHNICAL DATA 12
MANUFACTURER’S DECLARATIONS 13
DMX CONTROL 69
DEUTSCH
SICHERHEITSHINWEISE 14
EINFÜHRUNG 15
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 16
BEDIENUNG 17
AUFSTELLUNG UND MONTAGE 21
TORKLAPPE UND FILTERRAHMEN MONTIEREN /
DEMONTIEREN / LINSEN REINIGEN 21
DMX TECHNIK 22
TECHNISCHE DATEN 23
HERSTELLERERKLÄRUNGEN 24
DMX STEUERUNG 69
FRANCAIS
MESURES PRÉVENTIVES 25
INTRODUCTION 26
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE
ET D’AFFICHAGE 27
MODE D’EMPLOI 28
INSTALLATION ET MONTAGE 32
MONTAGE/DÉMONTAGE DU VOLET COUPE-FLUX ET DU
CADRE POUR FILTRE / NETTOYAGE DES LENTILLES 32
TECHNOLOGIE DMX 33
CARACTÉRISTIQUES TECHNIQUES 34
DÉCLARATIONS DU FABRICANT 35
PILOTAGE DMX 69
ESPAÑOL
MEDIDAS DE SEGURIDAD 36
INTRODUCCIÓN 37
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 38
FUNCIONAMIENTO 39
INSTALACIÓN Y MONTAJE 43
MONTAR/DESMONTAR LA VISERA Y EL BASTIDOR DE FILTRO /
LIMPIAR LAS LENTES 43
TECNOLOGÍA DMX 44
DATOS TÉCNICOS 45
DECLARACIONES DEL FABRICANTE 46
CONTROL DMX 69
POLSKI
ŚRODKI OSTROŻNOŚCI 47
WPROWADZENIE 48
GNIAZDA, ELEMENTY OBSŁUGI I WSKAŹNIKI 49
OBSŁUGA 50
USTAWIANIE I MONTAŻ 54
MONTAŻ WRÓT REFLEKTORA IRAMKI FILTRA / DEMONTAŻ /
CZYSZCZENIE SOCZEWEK 54
TECHNIKA DMX 55
DANE TECHNICZNE 56
OŚWIADCZENIA PRODUCENTA 57
STEROWANIE DMX 69
ITALIANO
MISURE PRECAUZIONALI 58
INTRODUZIONE 59
RACCORDI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 60
UTILIZZO 61
INSTALLAZIONE E MONTAGGIO 65
MONTAGGIO E SMONTAGGIO DEL PARALUCE E DEL
PORTAFILTRO / PULIZIA DELLE LENTI 65
TECNOLOGIA DMX 66
DATI TECNICI 67
DICHIARAZIONI DEL PRODUTTORE 68
CONTROLLO DMX 69
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Product specificaties

Merk: Cameo
Categorie: Lamp
Model: F4 T

Heb je hulp nodig?

Als je hulp nodig hebt met Cameo F4 T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lamp Cameo

Cameo

Cameo OPUS X4 PROFILE Handleiding

23 September 2024
Cameo

Cameo ZENIT P 130 Handleiding

18 December 2023
Cameo

Cameo ZENIT B60 Handleiding

24 Augustus 2023
Cameo

Cameo FLAT PRO 12 G2 Handleiding

18 Augustus 2023
Cameo

Cameo P2 T Handleiding

18 Augustus 2023
Cameo

Cameo S4 IP Handleiding

18 Augustus 2023
Cameo

Cameo STUDIO PAR 6 G2 Handleiding

18 Augustus 2023
Cameo

Cameo Q-SPOT 40 RGBW Handleiding

18 Augustus 2023
Cameo

Cameo ZENIT W600 SMD Handleiding

18 Augustus 2023
Cameo

Cameo LUXIS FC Handleiding

18 Augustus 2023

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Chauvet

Chauvet WELL POD 2X6 Handleiding

17 December 2024
Makita

Makita MT001 Handleiding

16 December 2024
Ledlenser

Ledlenser ML6 Handleiding

16 December 2024
Ledlenser

Ledlenser ML4 Handleiding

16 December 2024
Ledlenser

Ledlenser H5R Work Handleiding

16 December 2024
Ledlenser

Ledlenser H3.2 Handleiding

16 December 2024
Ledlenser

Ledlenser MH5 Handleiding

16 December 2024
Ledlenser

Ledlenser MH4 Handleiding

16 December 2024
Ledlenser

Ledlenser H7R Work Handleiding

16 December 2024
Ledlenser

Ledlenser H7R Core Handleiding

16 December 2024