Cameo AZOR B1 Handleiding

Cameo Lamp AZOR B1

Lees hieronder de 📖 handleiding in het Nederlandse voor Cameo AZOR B1 (96 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/96
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
AZOR® B1
LED BEAM MOVING HEAD
CLAB1
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5-6
OPERATION 6-12
INSTALLATION 13
DMX TECHNOLOGY 14
TECHNICAL DATA 15
MANUFACTURER’S DECLARATIONS 16
DMX CONTROL 88-93
DEUTSCH
SICHERHEITSHINWEISE 17-18
EINFÜHRUNG 18
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 19-20
BEDIENUNG 20-26
AUFSTELLUNG UND MONTAGE 27
DMX TECHNIK 28
TECHNISCHE DATEN 29
HERSTELLERERKLÄRUNGEN 30
DMX STEUERUNG 88-93
FRANCAIS
MESURES PRÉVENTIVES 31-32
INTRODUCTION 32
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE
ET D’AFFICHAGE 33-34
MODE D’EMPLOI 34-41
INSTALLATION ET MONTAGE 42
TECHNOLOGIE DMX 43
CARACTÉRISTIQUES TECHNIQUES 44
DÉCLARATIONS DU FABRICANT 45
PILOTAGE EN MODE DMX 88-93
ESPAÑOL
MEDIDAS DE SEGURIDAD 46-47
INTRODUCCIÓN 47-48
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 48-49
FUNCIONAMIENTO 49-55
INSTALACIÓN Y MONTAJE 56
TECNOLOGÍA DMX 57
DATOS TÉCNICOS 58
DECLARACIONES DEL FABRICANTE 59
CONTROL DMX 88-93
POLSKI
ŚRODKI OSTROŻNOŚCI 60-61
WPROWADZENIE 61-62
GNIAZDA, ELEMENTY OBSŁUGI I WSKAŹNIKI 62-63
OBSŁUGA 63-69
USTAWIANIE I MONTAŻ 70
TECHNIKA DMX 71
DANE TECHNICZNE 72
OŚWIADCZENIA PRODUCENTA 73
STEROWANIE DMX 88-93
ITALIANO
MISURE PRECAUZIONALI 74-75
INTRODUZIONE 75-76
CONNESSIONI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 76-77
UTILIZZO 77-83
INSTALLAZIONE E MONTAGGIO 84
TECNOLOGIA DMX 85
DATI TECNICI 86
DICHIARAZIONI DEL PRODUTTORE 87
CONTROLLO DMX 88-93
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Product specificaties

Merk: Cameo
Categorie: Lamp
Model: AZOR B1

Heb je hulp nodig?

Als je hulp nodig hebt met Cameo AZOR B1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Lamp Cameo

Cameo

Cameo OPUS X4 PROFILE Handleiding

23 September 2024
Cameo

Cameo ZENIT P 130 Handleiding

18 December 2023
Cameo

Cameo ZENIT B60 Handleiding

24 Augustus 2023
Cameo

Cameo FLAT PRO 12 G2 Handleiding

18 Augustus 2023
Cameo

Cameo P2 T Handleiding

18 Augustus 2023
Cameo

Cameo S4 IP Handleiding

18 Augustus 2023
Cameo

Cameo STUDIO PAR 6 G2 Handleiding

18 Augustus 2023
Cameo

Cameo Q-SPOT 40 RGBW Handleiding

18 Augustus 2023
Cameo

Cameo ZENIT W600 SMD Handleiding

18 Augustus 2023
Cameo

Cameo LUXIS FC Handleiding

18 Augustus 2023

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Livarno Lux

Livarno Lux IAN 66760 Handleiding

17 November 2024
Livarno Lux

Livarno Lux LTL 20 A2 Handleiding

17 November 2024
Livarno Lux

Livarno Lux 1241/022L+1242/022L Handleiding

17 November 2024
Livarno Lux

Livarno Lux 7594-010L Handleiding

17 November 2024
Livarno Lux

Livarno Lux 7596-010L Handleiding

17 November 2024
Dorr

Dorr SLR-16 Handleiding

17 November 2024
Eurolite

Eurolite TMH BSW-380 Handleiding

16 November 2024
Eurolite

Eurolite AKKU Table Light 2 Handleiding

16 November 2024
Eurolite

Eurolite LED IP FL-200 Handleiding

16 November 2024
Eurolite

Eurolite LED IP FL-300 Handleiding

16 November 2024