Brother SDX125i Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Brother SDX125i (111 pagina's) in de categorie Papiersnijder. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/111
Be sure to read this document before using the machine.
Operation Manual
Cutting Machine
Product Code: 893-Z05/Z09
i
Terms of Use
IMPORTANT-PLEASE READ CAREFULLY:
This Terms of Use (“Agreement”) is a legal agreement between Brother Industries, Ltd. (“Company”) and you
that governs your use of any Software, installed on or made available by Company for use with sewing or craft
products (“Company Product”). The term of “Software” means any and all contents data, design data, data
format, firmware of Company Product, and PC application or mobile device application.
By using the Software and Company Product, you shall be deemed to have agreed to be bound by the terms of
this Agreement. If you do not agree to the terms of this Agreement, Company is unwilling to license the Software
and you are not allowed to use the Software. Amendments and supplements to this Agreement may be attached
to the Software.
An individual who accepts this Agreement on behalf of an entity represents to Company that he or she has the
legal right to enter into a binding legal agreement for that entity.
Terms and Conditions
1 Grant of License.
1.1 Subject to this Agreement, Company hereby grants you a personal, non-exclusive, non-
transferable and revocable license to use the Software only within the Company Product.
1.2 Your right to use of the Software is licensed and not sold, and solely for your use subject to this
Agreement. Company or its suppliers retains all right, title, and interest relating to Software,
including without limitation all intellectual property rights relating thereto.
2 Restrictions
2.1 Except as expressly set out in this Agreement or as required by any local law, you shall undertake:
2.1.1 not to disassemble, de-compile, reverse engineer, translate or otherwise attempt to learn
the source code of the Software(including the data or contents created by using the
Company Product or contents editing application software; hereinafter the same shall
apply in this Clause 2.);
2.1.2 not to create derivative works based on the whole or any part of the Software;
2.1.3 not to distribute, provide or make available the Software in any form, in whole or in part
to any person without prior written consent from Company;
2.1.4 not to copy the Software, except where such copying is incidental to normal use of the
Software with Company Product or where it is necessary for the purpose of back-up or
operational security;
2.1.5 not to transfer, rent, lease, sub-license, loan, translate, merge, adapt, vary, alter or modify,
the whole or any part of the Software nor permit the Software or any part of it to be
combined with, or become incorporated in, any other programs;
2.1.6 to include Company’s copyright notice and this Agreement on all entire and partial copies
of the Software; and
2.1.7 not to use the Software for any purpose (including, but not limited to, use with
unauthorized sewing/craft products or software) other than as provided under Clause 1 of
this Agreement.
3 No warranty
TO THE EXTENT PERMISSIBLE BY APPLICABLE LAW, THIS SOFTWARE IS PROVIDED TO YOU
"AS IS" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, WHETHER ORAL OR
WRITTEN, EXPRESS OR IMPLIED. COMPANY SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-
INFRINGEMENT AND/OR FITNESS FOR A PARTICULAR PURPOSE.
4 Limitation of liability
4.1 COMPANY SHALL NOT BE LIABLE TO YOU, ITS END-USERS OR ANY OTHER ENTITY FOR
ANY LOSS OF PROFITS OR INCOME OR SAVINGS, LOSS OF DATA, INTERRUPTION OF USE,
OR CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR INDIRECT DAMAGES
INCURRED BY SUCH PARTY (WHETHER IN AN ACTION IN CONTRACT OR TORT), EVEN IF
COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, ARISING OUT
OF OR RELATING TO THE SOFTWARE, SUPPORT SERVICE OR THIS AGREEMENT. THESE
ii
LIMITATIONS SHALL APPLY TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW
NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
4.2 NOTWITHSTANDING THE CLAUSE 3 OR 4.1 HEREOF, THIS AGREEMENT DOES NOT
PURPORT TO EXCLUDE OR RESTRICT COMPANY'S LIABILITY FOR DEATH OR PERSONAL
INJURY RESULTING FROM NEGLIGENCE OR LIMIT THE STATUTORY RIGHTS OF A
CONSUMER.
5 Termination
5.1 Company shall have the right to terminate this Agreement at any time by providing a written
notice to you if you commit a material breach of any terms of this Agreement and fail to
immediately rectify such breach upon Company’s request.
5.2 Upon termination for any reason all rights granted to you under this Agreement shall cease, you
shall cease all activities authorized by this Agreement and you shall immediately delete or
remove the Software from all computer equipment in your possession and delete or destroy all
copies of the Software or its derivative works in your possession. In addition to the above, you
shall delete contents or design data created by you from the Company Product in your
possession.
6 Miscellaneous terms
6.1 You shall not export or re-export the Software or any copy or adaptation thereof in violation of
any applicable laws or regulations.
6.2 You shall not assign all or any part of this Agreement to any third party or any interest therein,
without prior written consent of Company. A change of control or reorganization of you
pursuant to a merger, sale of assets or stock shall be deemed to be an assignment under this
Agreement.
6.3 You agree that a breach of this Agreement will cause irreparable injury to Company for which
monetary damages would not be an adequate remedy and Company shall be entitled to seek
equitable relief in addition to any remedies it may have hereunder or at law without a bond,
other security, or proof of damages.
6.4 If any provisions of this Agreement shall be declared or determined as void or unenforceable by a
court of competent jurisdiction, such provisions shall be severable and independent from the
other provisions of this Agreement and the validity of the other provisions and of the entire
Agreement shall not be affected thereby.
6.5 This Agreement, together with all exhibits or other attachments referenced herein, constitutes the
entire agreement between the parties on the subject matter hereof, and supersedes all proposals,
oral and written, between the parties on this subject.
6.6 If Company fails to insist that you perform any of your obligations under this Agreement, or if
Company does not enforce any rights against you, or if Company delay in doing so, that will not
mean that Company have waived any rights against you and will not mean that you do not have
to comply with those obligations. If Company does waive a default by you, Company will only
do so in writing, and that will not mean that Company will automatically waive any later default
by you.
6.7 This Agreement is governed by the laws of Japan and Japanese Courts shall have exclusive
jurisdiction with respect to this Agreement except with regard to enforcement in which case the
jurisdiction of the Japanese Courts shall be non-exclusive.
6.8 The Company may update this Agreement in the below cases: A) When the changes are made for
the users’ benefit, or B) When the updates to the Agreement are adequate, reasonable, and not
contrary to the purposes of the Agreement. The Company will notify you and give you the
opportunity to review any material changes or updates to the Agreement, by posting a notice on
the Company’s website or a website specified by the Company at least 30 days before the
Agreement enters into effect. Once the updated Agreement is in effect, you will be bound by it if
you continue to use the Software.
1
Thank you for purchasing this machine.
Before using this machine or attempting any maintenance, carefully read the “IMPORTANT SAFETY
INSTRUCTIONS” on the Product Safety Guide, and then read the Operation Manual for the correct operation of
the various functions. In addition, after you have finished reading this manual, store it where it can quickly be
accessed for future reference. Failure to follow these instructions may result in an increased risk of personal
injury or damage to property, including through fire, electrical shock, burns or suffocation.
This machine is intended for household use.
This machine is approved for use in the country of purchase only.
Due to product quality improvements, the specifications or appearance of this machine may change without notice.
The screens in this manual are for illustration purposes only and may differ from the actual screens.
The contents of this document are subject to change without notice.
The contents of this document may not be duplicated or reproduced, partially or in full, without permission.
We assume no responsibility for damages arising from earthquakes, fire, other disasters, actions of third parties, the user’s
intentional or negligent operation, misuse or operation under other special conditions.
For additional product information, visit our web site at www.brother.com
Symbols Used in This Document
The following symbols are used in this document.
INTRODUCTION
IMPORTANT NOTICE
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Failure to observe instructions with this marking may result in fatal or
critical injuries.
CAUTION
Failure to observe instructions with this marking may result in serious
injuries.
2
Terms of Use .................................................. i
INTRODUCTION .......................................... 1
IMPORTANT NOTICE ................................... 1
IMPORTANT SAFETY INSTRUCTIONS ......... 1
Symbols Used in This Document........................... 1
FEATURES...................................................... 4
Patterns (“Pattern” mode) ...................................... 4
Scanning (“Scan” mode) ........................................ 4
Transferring Data using the Wireless Network
Connection Function .............................................. 5
1 GETTING STARTED............6
PARTS AND FUNCTIONS ............................. 6
Unit Descriptions - Front ........................................ 6
Unit Descriptions - Rear......................................... 7
Unit Descriptions - Operation Panel ...................... 7
Included Accessories ............................................. 7
BEFORE USE .................................................. 8
Removing the Packing Materials............................ 8
Turning On/Off the Machine................................... 8
Preparing for Feeding the Mat ............................... 9
Operation of LCD Panel ......................................... 9
MACHINE SETTINGS .................................. 10
Settings Screen .................................................... 10
Auto Shutdown..................................................... 12
2 BASIC OPERATIONS........14
FIRST STEPS................................................. 14
Selecting the Mat Appropriate for the Material.... 14
Reference Table of Mat and Material
Combinations ....................................................... 15
Attaching the material to the mat......................... 17
Blade and Material Combination.......................... 24
Installing and Uninstalling the Holder................... 25
Test Cut (Trial Cut) ............................................... 26
PATTERN CUTTING .................................... 30
Tutorial 1 - Cutting Patterns................................. 30
Tutorial 2 - Cutting Advanced Patterns................ 33
PATTERN SELECTION ................................. 39
Selecting a Single Pattern .................................... 39
Selecting Multiple Patterns .................................. 39
3
ADVANCED OPERATIONS
...41
CUTTING AND EDITING FUNCTIONS ...... 41
Pattern Editing Functions..................................... 41
Pattern Editing Functions - Multiple Patterns ...... 42
Mat Layout Screen ............................................... 42
Layout Editing Functions...................................... 43
Object Editing Screen .......................................... 44
Undoing an Operation .......................................... 45
Grouping/Ungrouping Patterns............................ 45
Welding (Merging the Outlines of Multiple
Patterns) ............................................................... 47
Aligning Patterns .................................................. 48
Auto Layout Functions ......................................... 50
Scanning a Background Image............................ 51
Character Input Functions.................................... 52
MEMORY FUNCTIONS ...............................54
Saving .................................................................. 54
Retrieve Data........................................................ 55
Retrieve from CanvasWorkspace (Via a Wireless
Network Connection) ........................................... 56
Retrieve from CanvasWorkspace (Using a USB
Cable) (compatible only with Windows) ............... 57
Importing Designs ................................................ 58
Retrieve Transferred Patterns from Artspira (Using a
Wireless Network) ................................................ 58
Retrieving Embroidery Data for Cutting
(Compatible Models Only)...........................59
Preparing .phc or .pes Files ................................. 59
Retrieving the Pattern to the Cutting Machine..... 59
Creating Appliqué Data........................................ 60
Creating Embroidering Line Data ......................... 60
DRAWING FUNCTIONS .............................63
Drawing ................................................................ 63
Cutting Around Drawings..................................... 64
Using Drawing Functions to Fill Patterns/Make
Outlines Thicker ................................................... 68
4
SCANNING FUNCTIONS
... 70
SCANNING FOR CUTTING (Direct Cut)..... 70
Tutorial 3 - Scanning and Cutting ........................ 70
Advanced Cutting Functions for “Direct Cut ...... 74
CREATING CUTTING DATA (Scan to Cut
Data)............................................................76
Tutorial 4 - Creating Cutting Data ........................ 76
Adjusting Image Detection Levels........................ 82
SCANNING IMAGES (Scan to USB).............84
Notes on Scanning............................................... 84
Tutorial 5 - Scanning to USB ............................... 84
Selecting the Area to be Saved............................ 86
Transferring an Image to CanvasWorkspace....... 86
5 APPENDIX ....................... 88
CONSUMABLES........................................... 88
Replacement Criteria............................................ 88
Replacing the Blade ............................................. 88
CARE AND MAINTENANCE ........................ 90
Cleaning ............................................................... 90
Cleaning the Scanner Glass................................. 92
Adjusting the Screen ............................................ 93
Adjusting the Scanning/Cutting Position ............. 93
Adjusting the Position of the Feed Roller............. 95
TROUBLESHOOTING .................................96
ERROR MESSAGES.....................................100
UPDATING THE SOFTWARE.....................103
Automatic Update Function ............................... 103
Update Procedure Using USB Flash Drive ........ 104
CONTENTS
3
Update Procedure Using the Application
(CanvasWorkspace) ........................................... 104
OPTIONAL ACCESSORIES ........................ 106
PRODUCT SPECIFICATIONS .................... 106
INDEX ....................................................... 107
4
Patterns (“Pattern” mode)
Select a pattern and edit it to create your own design.
By simply loading craft paper or fabric, you can
quickly create precision paper and fabric cutouts.
The editing functions of ScanNCut DX will allow you to
easily edit the built-in patterns to create your own
design.
Scanning (“Scan” mode)
Scan an illustration, photo or your own drawing to
create personalized cut designs. The design can then
be cut out or saved as data.
Without your PC or mobile device, you can scan your
choice of pattern, use/edit the scanned design, and
save the pattern for later use.
FEATURES
Home screen
Select a pattern.
“Tutorial 1 - Cutting Patterns
on page 30
“Tutorial 2 - Cutting
Advanced Patternson
page 33
Scan an image.
“Tutorial 3 - Scanning and
Cutting” on page 70
“Tutorial 4 - Creating Cutting
Data” on page 76
“Tutorial 5 - Scanning to
USB” on page 84
5
Transferring Data using the Wireless Network Connection Function
This machine is equipped with a wireless network connection function. With this function, patterns edited in the
dedicated application CanvasWorkspace or patterns data in Artspira can be transferred to the machine via a
wireless network connection. Refer to the following to use the wireless network connection function.
1. Connecting to a wireless network:
Touch or in the home screen to specify the wireless network connection settings. For the
connection procedure, refer to “Wireless Network Setup Guide”.
2. Login to CanvasWorkspace Internet version.
In order to use CanvasWorkspace, a CanvasWorkspace login ID is necessary. If you do not have a free
account, go to <http://CanvasWorkspace.Brother.com> to create a new account.
3. Register machine under CanvasWorkspace.
In order to save or retrieve patterns, your machine must first be registered with CanvasWorkspace. For
details, refer to “Wireless Network Setup Guide”.
4. Retrieving/saving patterns:
Patterns can be downloaded or uploaded, without using a USB flash drive. For details, see “Saving” on
page 54 andRetrieve Data” on page 55.
CanvasWorkspace (PC Version) is a PC based application that allows you to create and edit cutting or drawing
pattern data to download to your cutting machine. The PC version allows you to edit the pattern data without
an Internet connection.
You can download this application from the following URL:
http://s.brother/cuoad/
The CanvasWorkspace Internet version provides you access to a variety of projects with step by step
instructions.
Artspira is a cloud based mobile app where you can transfer designs with WLAN connected machines.
For more information about the app, refer to the Artspira App Quick Guide. (https://s.brother/csyai/)
6
Chapter 1 GETTING STARTED
Unit Descriptions - Front
aOperation Panel
Allows you to control the unit and specify settings with
the LCD panel and operating buttons. The angle of the
operation panel can be adjusted.
bTool Tray
Stores accessories for easy access during use.
cCarriage
Moves the installed holder for cutting or drawing.
1Holder
Installs in the carriage to cut or draw on craft paper
or fabric. Use the holder designed specifically for
cutting or drawing.
2Holder Guide
The guide secures the holder.
3Holder Lock Lever
Releases the holder when the lever is raised. Locks
the holder when the lever is lowered.
dScanner Lever
Adjusted according to the operation being performed.
For details, see “Preparing for Feeding the Maton
page 9.
eGrips
Grasped when moving the machine.
fFeed Rollers
Should be adjusted on the right side when the
optional roll feeder is used. For details, see “Adjusting
the Position of the Feed Roller” on page 95.
gShaft
Drives a feed roller on each end to feed the mat.
hFeeder Release Lever
Locks or releases the shaft when the optional roll
feeder is used. For normal operations, set to the
locked position. For details, see “Adjusting the
Position of the Feed Roller” on page 95.
iTool Holder
Holds accessories upright for easy access during use.
jStorage
Stores accessories.
kFront Tray Cover
Protects the feed rollers, carriage and holder. Open
the cover while the machine is operating.
lFeed Slot
Feeds in the mat when it is loaded.
PARTS AND FUNCTIONS
h
i
a
b
c
e
d
e
fgk
j
l
f
a
b
c
8
Removing the Packing Materials
Before turning on the machine, open the front tray
cover, and then remove all shipping tapes (in front
and back of the machine) and the cardboard shock-
absorbing material.
aShipping tape
bCardboard shock-absorbing material
Note
If the packing materials were removed after the
machine was turned on, turn the machine off,
then on again. Continuing to use the machine
without restarting it may result in incorrect
operation.
Turning On/Off the Machine
aConnect the power cord to the machine.
aPower cord
bPlug the power cord into an electrical outlet.
cPress in the operation panel.
When the opening screen appears, touch anywhere on
the display.
When the following message appears, touch the
“OK” key.
BEFORE USE
ba
a


Product specificaties

Merk: Brother
Categorie: Papiersnijder
Model: SDX125i

Heb je hulp nodig?

Als je hulp nodig hebt met Brother SDX125i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden