Bowers And Wilkins 707 S2 Handleiding

Bowers And Wilkins Speaker 707 S2

Lees hieronder de 📖 handleiding in het Nederlandse voor Bowers And Wilkins 707 S2 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

ENGLISH

Speaker Positioning

Adjustment of speaker position following initial installation

will probably further improve the sound quality and is usually

worthwhile.

In either stereo or home theatre installations, try to ensure that the

immediate surroundings of each speaker are similar in acoustic

character. For example, if one speaker is adjacent to bare walls

while the other is adjacent to soft furnishings and curtains, both

the overall sound quality and the stereo image are likely to be

compromised.

Conventional Stereo Systems

To begin with, the speakers should be positioned between 1.5m

and 3m apart at two corners of an equilateral triangle completed

by the listening area at the third corner. The speakers should be

approximately 0.5m away from the back wall, and at least 0.5m

away from any side walls (above).

Home Theatre Systems

If the speakers are to be used for the front channels in a home

theatre system, they should be placed closer together than for

2-channel audio, because the surround channels tend to widen

the image. Positioning the speakers within approximately 0.5m

of the sides of the screen will also help keep the sound image

in scale with the visual image. As with conventional stereo

positioning, the speakers should ideally be at least 0.5m away

from any side walls. If you would prefer to place your speaker

against the back wall and this location results in over emphasised

bass, see the Fine Tuning section of this manual for information

on using the foam plugs.

Stray magnetic elds

The speaker drive units create stray magnetic elds that extend

beyond the boundaries of the cabinet. We recommend you keep

magnetically sensitive articles (CRT television and computer

screens, computer discs, audio and video tapes, swipe cards and

the like) at least 0.5m from the speaker. LCD, OLED and plasma

screens are not affected by magnetic elds.

2. Positioning

>0.5m >0.5m

>0.5m

110° - 130°

~40°

5 Channels 7 Channels

1.5m - 3m

ENGLISH

Ensure that the positive terminals on the speaker (marked + and

coloured red) are connected to the positive output terminal on the

amplier and the negative terminals on the speaker (marked – and

coloured black) are connected to the negative output terminal on

the amplier. Incorrect connection can result in poor imaging and

loss of bass.

Ask your dealer for advice when selecting speaker cable.

All connections should be made with the audio equipment

switched off.

There are 2 linked pairs of terminals on the back of the speaker.

For conventional connection (above left), the terminal links

should remain in place (as delivered) and just one pair of

terminals connected to the amplier. For bi-wire connections

or bi-amplication (above right), the terminal links should be

removed and each pair of terminals connected to the amplier

or ampliers independently. Bi-wiring can improve the resolution

of low-level detail.

3. Connections

Product specificaties

Merk:	Bowers And Wilkins
Categorie:	Speaker
Model:	707 S2
Kleur van het product:	Zwart
Gewicht:	6000 g
Breedte:	165 mm
Diepte:	260 mm
Hoogte:	280 mm
Materiaal behuizing:	Hout
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	30 W
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Audio-uitgangskanalen:	2.0 kanalen
Speaker plaatsing:	Vloer
Aantal drivers:	2
Woofer:	Nee
Diameter driver:	130 mm
Peak Music Power Output (PMPO):	100 W
Frequentiebereik:	45 - 33000 Hz
Gevoeligheid:	84 dB
Luidspreker soort:	2-weg
Totale harmonische vervorming (THD):	1 procent
Diameter hogetonenluidspreker:	25 mm
Tweeter:	Nee
Versterker input impedantie:	8 Ohm