Boss MR752C Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Boss MR752C (6 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Tweeter Type
Max Power (watts)
Efficiency (1W/1M)
Frequency Response
Min. Mounting Depth Allowing
Clearance(mm/in)
Impedance
Sealed Enclosure Volume (cu.ft)
MR652C MR752C
1” PEI Dome
350
90
40-20kHz
62mm / 2 7/16”
4 ohms
0.43 0.71
Ported Enclosure Volume (cu.ft) 0.9 1.25
Ported diameter (mm/in)
Port length (mm/in)
50mm(2”)
25mm(1”)
60mm(2-3/8”)
30mm(1-3/16”)
400
92
60-20kHz
4 ohms
70mm / 2 3/4”
Calculating Required Enclosure Volume
These loudspeakers will perform best if they are i nstalled in a sealed or a
ported enclosure with the appropriate interior volume. Please refer to the
tables for the suggested volume for your speaker a nd application.
These volumes are provided in the table above are in cubic feet. In order
to design your enclo sure, you will first need to convert this data to cubic
inches. To convert cubic feet to cubic inches, simply multiply by 1728:
Model Sealed volume Ported volume
MR652C 743 cu in. 1227 cu in.
MR752C 1572 cu in. 2160 cu in.
Calculating Enclosure Dimensions
Calculating the exterior cabinet dimensions requires that you first
estimate height and width of the enclosure based on the available space
in your boat. You then work with this estimate to determine the depth of
the cabinet.
For example:
1. You want an MR6 52C sealed enclosure with exterior dimensions of
8"W x 10" H.
2. Subtract the cabinet material thickness (3/4" MDF x 2) from the
1” PEI Dome
PAGE 1
Wiring
exterior W X H = 6.5" x 8.5" (this yields the interior W x H).
3. Multiply (interior width) x (interior height): 6.5" x 8.5" = 55.25".
4. Divide the required interior volume from the table by this number: 743
Γ· 55.25 = 13.45". This reveals the interior depth required.
5. Add 1-1/2" to this dimension to calculate exterior depth: 13.45" + 1.5" =
12.95".
In the above example we showed that one possible sealed cabinet size
for MR652C is approx. 8" x 10" x 13". We can see that if a 13" deep
enclosure cannot be accommodated in your boat, it will be necessary to
increase the height, width or both to come out with an enclosure of
acceptable size with the appropriate interior volume.
Important considerations when building an enclosure
Be sure that the cabinet is air-tight. Joints should be glued and caulked
on the interior of the joints.
For marine cabinets which may be exposed to moisture, be sure to use an
appropriate marine varnish to seal the surface of the MDF well.
PAGE 2


Product specificaties

Merk: Boss
Categorie: Hifi systeem
Model: MR752C

Heb je hulp nodig?

Als je hulp nodig hebt met Boss MR752C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem Boss

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem