Boss MR1640W Handleiding

Boss Autoradio MR1640W

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss MR1640W (21 pagina's) in de categorie Autoradio. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/21

CONTENTS

MR1640W User’s Manual - page 1

U S E R ’ S M A N U A L

MR1640W User’s Manual - page 2

Head unit installation

MR1640W Marine 3/ istMP CD Receiver Packing L

To ensure tha

meets the IPX

Standard, plea

carefully.

1. Remove the

the top of the

beginning the

Fig 1 R

2. Place the tw

provided over

prevent water

Figure 2 Apply

Before installing your new CD Receiver, please unpack the contents and check

that your package contains the following items:

2Head unit installation

4Detaching the front panel

5Removing the head unit

6Remote control installation

Flush mount

6Remote control installation

Surface mount

10 General and tuner controls

14 Remote control

15 CD Playback

15 MP3 playback

16 RDS radio functions

16 PTY station categories

17 Weather band tuning

18 Wiring diagram

19 Troubleshooting

20 Specifications

Congratulations on your

purchase of a Marine

Weather Band MP3/CD

Receiver.

It has been designed, engineered

and manufactured to bring you

the highest level of performance

and quality, and will afford you

years of listening pleasure.

Thank you for making

Marine your choice for

marine audio entertainment!

Main unit

Detachable front panel with protective case

Mounting hardware for main unit:

Rear bracket plate

Rear mounting screw

Plain washer

Spring washer

Screw

Hex nut

Removal keys (2)

Wiring harness

Wired remote control

Remote control cable

Mounting hardware for remote control:

Mounting arms (2)

Mounting tube (1)

Machine screws (2)

User’s manual

Warranty card

MR1640W

Fu edlly Mariniz

Weather Band MP3-Compatible

In-Dash CD Receiver

page

RDS Model with

Switchable U nSA/Europea

Frequencies

MR1640W User’s Manual - page 2

Head unit installation

MR1640W User’s Manual - page 3

Before installing your new

CD Receiver, please become familiar

with all the information contained in

this manual.

Choose a mounting location where the

unit will not distract or otherwise

interfere with the pilot’s ability to control

the boat.

Use only the installation parts and

hardware provided with the unit to

ensure proper installation. Using other

parts can cause malfunction and

possible damage to your CD

receiver.

Do not install this unit at an angle in

excess of 30º from horizontal, as it

may affect performance.

Although this unit has been designed

for outdoor use, you can extend its life

if you install it in a location which is

not subject to extreme temperatures,

from such sources as heaters or

exhaust lines. Also, if you see dirt, dust

or debris on a disc or in the CD slot,

remove it with a clean cloth to avoid

pushing it into the player mechanism.

To remove dirt from the faceplate, use

a clean cloth lightly moistened with

filtered water. If the unit is splashed

with water, wipe it off with such a clean

damp cloth before the water has dried

to avoid an accumulation of salts on

the face of the unit.

If properly installed, this unit will meet

the IPX5 Waterproof standard. Please

note that this does NOT mean the unit

is submersible, but will resist being

sprayed and splashed as might occur

in a normal boat cabin.

To ensure that the installation

meets the IPX5 Wat oerpr of

Standard, please follow these steps

carefully.

1. Remove the transport screws from

the top of the enclosure before

beginning the installation.

Fig 1 Remove transport screws

2. Place the two pieces of plastic film

provided over the two screw holes to

prevent water penetration.

Figure 2 Apply plastic film to seal screw holes

Figure 3 Bending the support tabs

3. Insert and tighten the “headless”

support screw into the back of the

head unit where shown.

4. Insert the mounting case for the

head unit into the dashboard. Inspect

the dashboard material to determine

its approximate thickness. Select the

appropriate support tabs and bend

them outward to secure the bracket

in place .(Figure 3)

5. Bend the backstrap to conform to

the mounting case and the dashboard

surface to which you plan to secure

the backstrap (Figure 4). Slide one of

the utility holes on the backstrap onto

the support screw and fasten it with

the spring washer and nut provided.

6. Using the 5 x 25mm screw and the

plain washer, secure the backstrap to

the dashboard surface as shown in

the diagram. Tighten, secure, and

check the overall mounting to be sure

it is safe and will not release in an

emergency stop or other sudden

movement of the vehicle.

Product specificaties

Merk:	Boss
Categorie:	Autoradio
Model:	MR1640W
Kleur van het product:	Wit
Ingebouwd display:	Ja
Geïntegreerde klok:	Ja
Bluetooth:	Nee
Ondersteund audioformaat:	MP3
Geïntegreerde geheugenkaartlezer:	Nee
FM-radio:	Ja
Uitgangsvermogen:	240 W
Audio-uitgangskanalen:	4.0 kanalen
MP3 afspelen:	Ja
D/A-converter:	1-Bit
AUX ingang:	Ja
Optische drive type:	CD, CD-R, CD-RW
Aantal voorkeurszenders:	30
Inclusief RDS tuner:	Ja
USB direct afspelen:	Nee
CD-R afspelen:	Ja
CD-RW afspelen:	Ja
Cd-speler:	Ja
ISO-aansluiting:	Ja
Fader:	Ja