Bose Panaray MB4 Handleiding

Bose Speaker Panaray MB4

Lees hieronder de 📖 handleiding in het Nederlandse voor Bose Panaray MB4 (21 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
1
PANARAY® MB4 Modular Bass Loudspeaker
Installation Guide*
Installationsvejledning*
Installationsanleitung*
Guía de instalación*
Guide d’installation*
Guida all’installazione*
Installatiehandleiding*
Installationsanvisning*
*For use by trained installers only
*Kun til brug for erfarne installatører
*Montage ausschließlich durch
ausgebildetes Installationspersonal
*Para uso exclusivo de instaladores capacitados
*Réservé aux installateurs ayant suivi une formation
*Solo per l’uso da parte di installatori professionisti
*Uitsluitend voor gebruik door ervaren installateurs
*Ska endast användas av utbildade installatörer
2
DECLARATION OF CONFORMITY
We, the offerer:
Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA
acknowledge our sole responsibility, that the product:
Kind of equipment: Loudspeaker
Type designation: Panaray
® MB4 Modular Bass Loudspeaker
In accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive,
is in compliance with the following norm(s) or document(s):
Technical regulations: EN50081-1, EN50082-1
Accredited by:
Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA
January 15, 2001
Bose Products B.V. Nic Merks
Nijverheidstraat 8, 1135 GE Edam Vice President, Europe
The Netherlands Manufacturer’s authorized EU representative
3
English
For Permanent Installation
WARNING:
Permanent installations involve the attachment of the loudspeakers to brackets or other mounting surfaces
for long-term or seasonal use. Such mountings, frequently in overhead locations, involve risk of personal injury if either the
mounting system or the loudspeaker attachment fails.
Bose
®
offers permanent mounting brackets for the safe use of these loudspeakers in such
installations. However, we realize some installations may call for use of other, custom-designed
mounting solutions or non-Bose mounting products. While Bose Corporation cannot be held
responsible for the proper design and use of non-Bose mounting systems, we offer the following
guidelines for the permanent installation of any Bose MB4 loudspeaker:
• Obtain your mounting system from a reputable manufacturer, and make sure the system
is specifically designed for the loudspeaker of choice and your intended use.
• Before using a custom-designed and fabricated mounting system, have a licensed
professional engineer review the design and fabrication for structural integrity and safety
in the intended application.
• Notice that all threaded attachment points on the bottom and top of each loudspeaker
cabinet have a metric M8 thread with at least 10 usable threads.
•Use a safety cable, separately attached to the cabinet at a point not in common with
the load-bearing attachment points of the bracket to the loudspeaker.
• If you are unfamiliar with the proper design, use, and purpose of a safety cable, consult
a licensed professional engineer, a rigging professional, or a theatrical lighting trades
professional.
CAUTION:
Use only graded hardware. Fasteners should be metric Grade 8.8 minimum and should be tightened
using a torque not to exceed 50 inch-pounds (5.6 Newton-meters). Overtightening the fastener could result in irreparable
damage to the cabinet and an unsafe assembly.
Do not re-tighten these fasteners unless they are visibly loose. Lockwashers or a thread locking compound intended for
hand disassembly (such as Loctite
®
242) should be used for a vibration resistant assembly.
CAUTION:
The fastener should be long enough to engage no fewer than 8 and no more than 20 threads of the
attachment point. A fastener should protrude by 16 to 22 mm, with 18 mm preferred (
5
/
8
to
7
/
8
inch, with
11
/
16
inch preferred)
beyond the assembled mounting parts to provide sufficient threaded attachment to the loudspeaker. Using a fastener that is
too long may result in irreparable damage to the cabinet and, when overtightened, can create a potentially unsafe assembly.
Using a fastener that is too short provides inadequate holding power and may strip the mounting threads, resulting in an
unsafe assembly. Confirm that at least 8 full threads are engaged in your assembly.
CAUTION:
Do not attempt to alter the threaded attachment points. While SAE
5
/
16
-18 UNC fasteners are very
similar in appearance to the metric M8, they are not interchangeable. Do not attempt to re-thread the attachment points to
accommodate any other thread size or type. Doing this will render the installation unsafe and will permanently damage the
loudspeaker. You may substitute
5
/
16
-inch washers and lockwashers for the 8 mm ones.
Installation of MB4 Loudspeaker..........................continues on p11


Product specificaties

Merk: Bose
Categorie: Speaker
Model: Panaray MB4

Heb je hulp nodig?

Als je hulp nodig hebt met Bose Panaray MB4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bose

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Sony

Sony SS-SPG01 Handleiding

22 November 2024
Sony

Sony SS-MB200H Handleiding

22 November 2024
Sony

Sony SS-MB300H Handleiding

22 November 2024
JBL

JBL Studio 690 Handleiding

22 November 2024
JBL

JBL Studio 680 Handleiding

22 November 2024
Extron

Extron SM 28 Handleiding

21 November 2024
JBL

JBL RM10 Handleiding

20 November 2024