Bogen OCS1 Handleiding

Bogen Speaker OCS1

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen OCS1 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Specifications subject to change without notice.

54-2089-01C 0711

Orbit Ceiling Speaker

OCS1

Installation and Use Manual

Product Description

Thank you for choosing NEAR Orbit Loudspeakers. You have purchased one of the®

finest ceiling loudspeakers available today, the NEAR Model OCS . Please familiarize1

yourself with this product by reading and reviewing the descriptions and diagrams in

this manual.

All NEAR products include similar technical and design aspects that are unique to

the market. NEAR invented and patented the "spiderless" woofer (MLS™), which

features a high-gauss ferrofluid to guide the voice coil through the magnetic field. The

benefits over conventional woofers with cloth spiders are several, including the

ability to constantly adjust voice coil alignment, extend linear excursion, and the

most efficient path for cooling the voice coil.

In addition, the use of metal-alloy cone structures provides several benefits over the

usual paper or plastic cone, such as elimination of cone flex or "break-up" in the

operating ranges, additional thermal path for the voice coil to stay cool, and an

extremely stable cone structure unaffected by changes in temperature.

The NEAR OCS Ceiling Loudspeaker is a full-range, wide dispersion system providing1

high-quality background and foreground music. It can be installed in either suspended

ceiling structures or hard surfaces such as sheetrock. It comes ready to install with

integral swinging arm clamps. An optional mounting bracket (TBCR) is available for

additional support (recommended for all suspended ceiling applications). The brack-

et can also be used for new construction ceilings, providing a cutout guide behind

the sheetrock surface and as a C-ring to stiffen the edges of the cutout opening.

A variety of speaker power levels are easily selected via a front panel rotary switch.

Settings for both 70V and 00V high-impedance systems, as well as a low-impedance1

(16-ohm) position, are provided.

The OCS features a removable snap-lock input connector, providing easy wire 1

connection for input as well as loop-through to the next speaker.

IMPORTANT

The OCS is not an outdoor speaker. Do not expose the speaker to rain or 1

moisture. The OCS1should be installed by qualified personnel.

Product Diagrams

OCS1Front Drawing (grille removed)

1. Coaxial Driver Assembly

2. Bass Tuning Vents (x2)

3. Grille Retention Groove

4. Power Tap Selection Switch

5. Mounting Clamp Screws (x4)

OCS1Rear Drawing

6. Metal Back Can

7. Snap-Lock Input Connector

8. Mounting Clamps (x4)

OCS1Rear Drawing (terminal cover)

9. Terminal Covers (2 identical halves)

10. Eyelets (x2)

11. Mounting Screws (x4)

12. Wire Exit Slot

13. Conduit Knock Out (x2)

OCS1Front Drawing

(grille removed)

OCS1Rear Drawing

(terminal cover)

Product specificaties

Merk:	Bogen
Categorie:	Speaker
Model:	OCS1
Kleur van het product:	Wit
Materiaal behuizing:	ABS kunststof
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Gemiddeld vermogen:	100 W
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	Universeel
Impedantie:	16 Ohm
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Plafond-montage
Aantal drivers:	1
Woofer:	Nee
Diameter driver:	20 mm
Frequentiebereik:	45 - 19000 Hz
Gevoeligheid:	89 dB
Versterker:	Nee
Tweeter:	Nee