Bogen NEAR S5 Handleiding

Bogen Speaker NEAR S5

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen NEAR S5 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Description

Features

• High sensitivity and exceptional power handling

• Two models: S5 for 8 ohms; S5T for 70V & 8 ohms

• 150W at 8 ohms (S5 & S5T)

• 70V Power settings: 32, 16, 8, 4, 2, 1 watts (S5T Only)

• Hemispherical mounting system makes it simple to

mount, aim, and lock-in position of loudspeaker

• 5-1/4” metal-alloy MDTTM mid/bass speaker cone is

extremely stable in all environments

• Patented MLSTM Ferrofluid voice coil centering replaces

distortion-causing mechanical spider and seals

magnet gap

• Professional Grade 1-1/2” diameter woofer voice coil

provides higher output level and ultra-low distortion

• 1” horn-loaded titanium high frequency driver delivers

clear, articulate response and consistent long-term

performance

• Wide, even coverage over listening area

• High-density, injection-molded cabinet provides an

exceptional cosmetic finish

• Low-resonance cabinet structure

• Precisely designed low-frequency tuning for proper

balance

• Advanced polymer compound cone surrounds resist UV

rays, chemicals, and salt spray

• Aluminum-alloy & Titanium cones, UV-protected ABS

cabinets, and powder-coated aluminum grilles and

mounting brackets assure long-term cosmetic

and sonic durability

• Pressure clamping input terminals for quick installation

The S5 & S5T compact, versatile speakers feature NEARʼs unique

driver technologies to produce the highest sound quality in the most

durable and reliable loudspeakers available. Precise sound repro-

duction is achieved with mid/bass drivers employing NEARʼs MDTTM

and patented MLS

TM technologies for superior sound and long-term

durability. The high-frequency driver is a 1” titanium diaphragm

which perfectly complements the metal-alloy LF driver. A built-in

32W transformer (S5T) makes it compatible with 70V sound

systems. The S5T speaker can switch between 70V or low-imped-

ance systems by using a power tap selection switch. NEARʼs

patented spiderless technology (MLS

TM) and advanced materials

deliver out-of-the-box performance year after year.

Unique MDT™ (Metal Diaphragm Technology):

• High rigidity and low mass of metal versus traditional papers

and plastics (extremely stable cone structure over long

periods of time)

• Fast transmission of sound through the diaphragm means

low energy storage

• Special anodizing process creates a ceramic coating for

increased stiffness

• Efficient heat-sinking of voice coils under long-term,

high-power situations

•Speaker diaphragms are manufactured with materials that

will not be altered by constant exposure to UV rays or water,

cold or heat, or extremely high or low humidity

Patented MLS™ (Magnetic Liquid Suspension):

• Voice coil is constantly centered for lower distortion

• Voice coil is more efficiently heat-sinked by fluid instead of air

• Greater linearity is accomplished because the mechanical

spider is eliminated

• Constant lubrication of the gap prevents oxidation from

humid environments

High-Performance

Foreground Loudspeakers

Models S5/S5T

Specifications subject to change without notice.

54-8023-50B 1010

Technical

Specifications

The loudspeaker shall be NEAR Model S5 or S5T with

a power handling capacity of 150 watts @ 8 ohms, or

32W @ 70V input (S5T), or approved equivalent. The

loudspeaker shall consist of one 5-1/4 inch metal-alloy

low-frequency diaphragm transducer and one horn-

loaded 1-inch titanium high-frequency diaphragm

transducer. A crossover network provides dividing and

smoothing of frequencies between the transducers.

A mathematically-aligned and vented molded enclosure

shall house all components. High-density ABS cabinet

material and powder-coated aluminum grille material will

assure long-term cosmetic stability.

The high-frequency driver shall utilize a rigid titanium

diaphragm and integral compounded rubber surround

for proper damping and long-term reliability.

The low-frequency driver shall utilize a metal-alloy

diaphragm with deep-anodized surface treatment for

rigidity and corrosion resistance. The cone shall provide

a heat transfer thermal path for the voice coil under

high-power inputs. Compounded rubber cone surrounds

shall be formulated to provide a high degree of damping

and long-term performance without decay.

The voice coil will be centered via a high gauss, low

viscosity magnetic fluid (Ferrofluid), which increases

the heat transfer efficiency from the voice coil to the

speakerʼs mechanical structure under long-term high-

power use. The magnetic fluid shall provide corrosion

resistance in the magnet gap.

The mounting bracket provided with the speaker shall

be designed to provide angular movement horizontally

and vertically to facilitate proper directional coverage. It

shall allow both vertical and horizontal orientation of the

loudspeaker. The bracket shall be formed from cast

metal-alloys with a scratch-resistant, powder-coated

finish. The input connectors for 8-ohm and 70V systems

shall be via a positive pressure-clamping device to facil-

itate connection of the speaker input wires.

Dimensions of the speaker shall not exceed 6-7/8” W x

9-3/4” H x 6-1/8” D without the bracket attached;

or, 6-7/8” W x 9-3/4” H x 8-1/8” D with the bracket

attached. Weight shall not exceed 8 lbs. for the S5,

or 9 lbs. for the S5T.

Architect & Engineer

Specifications

Models S5/S5T

Frequency Response (-10dB)*: 48 Hz to 17 kHz

Low-Frequency Design – Metal-Composite Cone

5-1/4” Nominal Dia.

Utilizing MLS Voice Coil Guidance System

High-Frequency Driver – Titanium Cone: 1” Horn-Loaded

Sensitivity (1W/1m, Avg. 100 Hz - 15 kHz): 89dB SPL

Dispersion

Horizontal:

130 Degrees

Vertical:

110 Degrees

Impedance Ratings

Low:

8Ω Only (S5 version)

High:

70V and 8Ω (S5T version)

Power Input (Maximum) 150W@ 8 ohms

Additional Taps: 32, 16, 8, 4, 2, 1 watts

Product Weight: S5: 8 lbs. / S5T: 9 lbs.

Speaker Dimensions (WxHxD)

Without Bracket:

6-7/8” H x 9-3/4” H x 6-1/8” D

With Bracket:

6-7/8” H x 9-3/4” H x 8-1/8” D

Enclosure Material: ABS

Product Color: White (“W” suffix) and Black (“B” suffix)

Mounting Bracket Material: Aluminum Alloy, Powder-Coated Finish

Grille Material: Perforated Aluminum, Powder-Coated Finish

Terminations: Pressure Clamp

Included Accessories: Color-Matched Mounting Bracket

Optional Accessories: Safety Cable CK10

*Half-Space Response

Horizontal

Polar

Response

Vertical

Polar

Response

Frequency

Curves

Response

-6-12-18-24-30-36 0

120

150

180

210

240

270

300

330

500 Hz

1000 Hz

2000 Hz

4000 Hz

8000 Hz

16000 Hz

120

150

180

210

240

270

300

330

-6-12-18-24-30-36

20 100 1K 10K200 500 2K 5K 20K (Hz)

(dBspl)

100

110

Half Space @ 1m

8 Ω / 1W

16W

32W

-6

-12

-18

-24

-30

-36

120

150

180

210

240

270

300

330

500 Hz

1000 Hz

2000 Hz

4000 Hz

8000 Hz

16000 Hz

-6

-12

-18

-24

-30

-36

120

150

180

210

240

270

300

330

TOP

TOP TOP

TOP

Product specificaties

Merk:	Bogen
Categorie:	Speaker
Model:	NEAR S5
Kleur van het product:	Zwart
Gewicht:	3628 g
Breedte:	152 mm
Diepte:	152 mm
Hoogte:	228 mm
Materiaal behuizing:	ABS kunststof
Connectiviteitstechnologie:	Bedraad
Type stroombron:	AC
Gemiddeld vermogen:	150 W
Volumeregeling:	Draaiknop
Equalizer-instellingen:	Nee
Aanbevolen gebruik:	PC
Impedantie:	8 Ohm
3,5mm-connector:	Ja
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	1
Woofer:	Nee
Diameter driver subwoofer (imperiaal):	- "
Diameter driver:	127 mm
Frequentiebereik:	48 - 17000 Hz
Versterker:	Nee
Tweeter:	Ja