Bogen HFCS1 Handleiding

Bogen Speaker HFCS1

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen HFCS1 (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
© 2006 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2091-01E 1302
High-Fidelity
Ceiling Speakers
Models
HFCS1 & HFCS1LP (Off-white),
HFCS1B & HFCS1LPB (Black)
Installation and Use Manual
Product Description
Bogen’s coaxial 2-way hi-fi ceiling speakers deliver unsurpassed performance and value. The
steel back can and front exit venting allow for deep bass response, enhancing the quality and
intelligibility of both speech and music. The HFCS LP uses a smaller, low-profile back can that1
allows for a greater range of installations. The speakers are available with off-white finish or
black finish (B versions).
Both speakers can be installed either in suspended ceiling structures or hard
surfaces (such as sheetrock). They come ready to install with integral swinging arm clamps.
An optional mounting bracket (TBCR) is available for additional support (recommended for
all suspended ceiling applications). The bracket can also be used for new construction ceilings,
providing a cutout guide behind the sheetrock surface and as a C-ring to stiffen the edges of
the cutout opening.
A variety of speaker power levels are easily selected via a front panel rotary switch. Settings
for both 70V and 100V high-impedance systems, as well as a low-impedance (16-ohm)
position, are provided.
The speakers feature a removable snap-lock input connector, providing easy wire connection
for input as well as loop-through to the next speaker.
IMPORTANT
The HFCS LP(B) are not outdoor speakers. Do not expose1 and 1(B) HFCS
the speakers to rain or moisture. The HFCS LP(B) should1 and 1(B) HFCS
only be installed by qualified personnel.
Always follow these basic safety precautions when installing and using the unit:
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean unit with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade, or the third prong, are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer. An operation manual is
provided with the product.
12. Unplug this apparatus during lightning storms or when not used for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Product Diagrams
Front Drawing (grille removed)
1. Coaxial Driver Assembly
2. Bass Tuning Vents (x2, HFCS1;
x1, HFCS1LP)
3. Grille Retention Groove
4. Power Tap Selection Switch
5. Mounting Clamp Screws (x4)
Rear Drawing
6. Metal Back Can
7. Snap-Lock Input Connector
8. Mounting Clamps (x4)
Rear Drawing (terminal cover)
9. Terminal Covers (2 identical halves)
10. Eyelets (x2)
11. Mounting Screws (x4)
12. Wire Exit Slot
13. Conduit Knockout (x2)
Front Drawing
(grille removed)
Rear Drawing
Rear Drawing
(terminal cover)
1


Product specificaties

Merk: Bogen
Categorie: Speaker
Model: HFCS1
Kleur van het product: Wit
Gewicht: 4082 g
Breedte: 311 mm
Diepte: 300.5 mm
Soort: Inbouwluidsprekers
Materiaal behuizing: Staal
Connectiviteitstechnologie: Bedraad
Type stroombron: AC
Gemiddeld vermogen: 75 W
Impedantie: 16 Ohm
Audio-uitgangskanalen: 1.0 kanalen
Speaker plaatsing: Plafond-montage
Aantal drivers: 1
Woofer: Nee
Diameter driver: 165 mm
Frequentiebereik: 65 - 19000 Hz
Gevoeligheid: 89 dB
Versterkeraansluiting (binding post): Ja
Versterker: Nee
Tweeter: Nee
AC-ingangsspanning: 100 V
Aantal producten inbegrepen: 1 stuk(s)

Heb je hulp nodig?

Als je hulp nodig hebt met Bogen HFCS1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bogen

Handleiding Speaker

Nieuwste handleidingen voor Speaker