Bogen AFI-8 Handleiding

Bogen Speaker AFI-8

Lees hieronder de 📖 handleiding in het Nederlandse voor Bogen AFI-8 (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Driver Complement:
Low Frequency: One Apogee 15"(381mm) permanent magnet cone-
type driver is treated with a waterproofing compound, providing
resistance to moisture, and enabling long-term stability of cone
resonance and cone mass parameters; also treated with Ferrofluid
®
for greater power handling capability, lower distortion, and control
of short-term impedance rise
High Frequency: One Apogee 3" (76mm) voice coil, 2" (51mm) exit
horn-loaded compression driver treated with Ferrofluid
®for greater
power handling capability, lower distortion, and control of short-
term impedance rise
Input Connectors:
Barrier strip, screw type #8
Compatible Processors:
AFIMain Frame Controller Chassis (using either AFI /-8- W -8B/-8 /
8WB Modules) or DLC24
Recommended Crossover (AFI
I
I
I
I-8B only):
Contact Apogee for full technical data on other DSP-based Processors
Handles:
Two handles – one top, one bottom – designed as an integral part of
the enclosure (no moving parts)
Grille:
Highly durable, quality finish on perforated steel (aluminum on SX version)
Rigging Hardware:
Fourteen rigging points, four each on top and bottom, two each on
both sides and rear, all backed with -gauge steel; points can be16
type thread3/8"-16 or M10
Finish:
Textured high-strength black or white epoxy paint; other colors optional
Enclosure Type:
30° trapezoidal, optimally-vented bass
Cabinet Construction:
Multi-ply hardwood
Options/Accessories:
• AF I Controller Processor or DLC24 Digital Processor
• SX weather treatment for harsh environments
• Assorted rigging components
Contractor Series
Loudspeaker System
Engineering Data:
Description:
Format:
AFI
I
I
I
I-8/8W Passive/Two-way
AFI
I
I
I
I-8B/8WB Bi-amped/Two-way
Dispersion:
AFI
I
I
I
I-8/8B H: 60° x V: 40°
AFI
I
I
I
I-8W/8WB H: 90° x V: 40°
Frequency Response (1m on axis):
46 20 3 Hz to kHz ± dB
Max. SPL (@1m):
AFI
I
I
I
I-8 124 130dB cont./ dB peak
AFI
I
I
I
I-8B 125 131dB cont./ dB peak
PTML (peak transient mechanical limit):
AFI
I
I
I
I-8 141 dB
AFI
I
I
I
I-8B 142 dB
Sensitivity (1W @ 1m):
AFI
I
I
I
I-8 98 4 dB SPL/100 Hz to kHz
AFI
I
I
I
I-8B LF: 99 dB SPL/100 Hz to 900 Hz
HF: 104 dB SPL/900 Hz to 5 kHz
Nominal Impedance:
8 ohms, each driver
Max. Power Handling:
AFI
I
I
I
I-8 400 1600 W cont./ W peak
AFI
I
I
I
I-8B LF: 400 1600 W cont./ W peak
HF: 150 600 W cont./ W peak
Dimensions:
front: 20.25 515"( mm) W x 30.25 769"( mm) H
rear: 13.3 338"( mm) W x 30.25 769"( mm) H
depth: 15.1 384"( mm)
Weight:
77 35 lb. ( kg)
The AF is a fully arrayable loudspeakerI-8
capable of filling large churches, theaters,
sports venues, and theme parks with clean,
articulate full bandwidth sound. Available with
a 60° x 40° or 90° x 40° high frequency horn
pattern insuring that the AFI-8 works
flawlessly in any room configuration. A bi-
amplified version is also available.
AFI-8
8W version pictured
©2006 Bogen Communications, Inc. 06/12
Specifications subject to change without notice. 55-0056-01D
0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330°
0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330°
0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180°
210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180°
210°
240°
270°
300°
330°
63 Hz 125 Hz 250 Hz
500 Hz 1,000 Hz 2,000 Hz
4,000 Hz 8,000 Hz 16,000 Hz
Measured in a free-field anechoic environment using a swept one-third octave input.
All polar measurements
obtained in a free-field
environment at 10° increments.
Polar Measurements AFI-8 (6 dB/division, normalized)
Polar Measurements AFI-8W (measurements for Hz to 63 500 Hz are identical to the AFI-8)
Dimensional Drawings AFI-8 (dimensions in inches and millimeters)
Frequency Response AFI-8
Processor Notes:
50 Spring Street, Ramsey, NJ 07446, USA
Tel: 800-443-3979 Fax: 800-999-9016 • • www.apogee-sound.com
0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330°
0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330° 0°
30°
60°
90°
120°
150°
180° 210°
240°
270°
300°
330°
1,000 Hz 2,000 Hz 4,000 Hz 8,000 Hz 16,000 Hz
The AFI Controller consists of an analog Main Frame which accepts four voicing modules.
Modules are available for each of the different AFI loudspeaker types, with two module
bays required for bi-amplified speakers.
The DLC Digital Loudspeaker Controller is a digital engine with an analog surface. It24
combines the most advanced technology available with intuitive interfaces to provide the
key elements that ensure optimal loudspeaker system performance and management in a
variety of live sound and fixed installation applications.
The controllers provide factory-set equalization curves to smooth the response, protective
limiting, and active crossovers (for bi-amplified models and subwoofers). Barrier strip
inputs and outputs are standard on the AFI Controller. XLR inputs and outputs are
standard on the DLC24.
12 dB/division
Hz (Frequency)


Product specificaties

Merk: Bogen
Categorie: Speaker
Model: AFI-8

Heb je hulp nodig?

Als je hulp nodig hebt met Bogen AFI-8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Bogen

Handleiding Speaker

Nieuwste handleidingen voor Speaker