Blustream EX40B-KIT Handleiding

Blustream AV extender EX40B-KIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream EX40B-KIT (10 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

EX40B-KIT

User Manual

IR RX

CAT

Input

Link IR TX IR RX

Link IR TX

CAT

Output

EX40B-KIT USER MANUAL

www.blustream.co.uk

Surge protection device

recommended

This product contains sensitive

electrical components that may be

damaged by electrical spikes, surges,

electric shock, lightning strikes, etc. Use

of surge protection systems is highly

recommended in order to protect and

extend the life of your equipment.

Safety And

Performance Notice

The transmission distances of HDMI

over UTP cables are measured using TE

CONNECTIVITY 1427071-6

EIA/TIA-568-B termination (T568B) of

cables is recommended for optimal

performance.

To minimise interference of the un-

shielded twisted pairs in the CAT5e/6

cable do not run the HDBaseT /

Cat5e/6/6a cabling with or in close par-

allel proximity to mains power cables.

Do not substitute or use any other

power supply other than the enclosed

unit, or a Bluestream approved

replacement.

Do not disassemble either the

Transmitter or Receiver units for

any reason. Doing so will void the

manufacturer’s warranty.

Introduction 03

Features 03

Panel descriptions 04

Terminating the interconnecting CAT cable 05

Understanding the status lights 05

EDID Control 06

Infrared distribution 07

Application diagram 08

Specifications 09

Package contents 09

Maintenance 09

Contents

Thank you for purchasing

this product.

For optimum performance and safety,

please read these instructions carefully

before connecting, operating or

adjusting this product. Please keep this

manual for future reference.

EX40B-KIT USER MANUAL

contact support@blustream.co.uk / support@blustream.com.au

Our EX40B-KIT HDMI™ extender set oers HDMI distribution over a single

CAT cable. The product delivers HDMI & B-directional IR up to lengths of

40m @ 1080p and 50m @ 1080i.

Introduction

FEATURES:

• Extends HDMI 1080p up to distances of 40m over single CAT

cable

• Extends HDMI 1080i and lower resolutions up to distances

of 50m over single CAT cable

• Supports industry standard video resolutions 480i-1080p

and DVI formats up to 1920x1080

• Supports 3D signal extension

• Supports LPCM 7.1ch, Dolby TrueHD, Dolby Digital Plus and

DTS-HD Master Audio transmission (*Note - Audio type must

be forced by source hardware as in-built EDID management

is limited to 2ch)

• Supports bi-directional IR from input and output locations

• Smart EDID management

• Supplied with Blustream IR receiver and emitter

• Requires local power at both Transmitter and Receiver

• HDCP compliant

WARNING!

Please read these instructions carefully before connecting, operating or adjusting this product. Incorrect termination of the RJ45

connecting cable may result in damage to the Blustream hardware.

Product specificaties

Merk:	Blustream
Categorie:	AV extender
Model:	EX40B-KIT
Kleur van het product:	Zwart
Breedte:	58 mm
Diepte:	15 mm
Hoogte:	96 mm
Gewicht verpakking:	500 g
Soort:	AV-zender & ontvanger
Montage gereedschap:	Ja
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i, 480p, 525i, 540p, 576i, 576p, 625i, 720i, 720p, 768p, 900p, 960p, 1024p, 1035i, 1080i, 1080p
Maximum resolutie:	1920 x 1080 Pixels
Snelstartgids:	Ja
HDCP:	Ja
Aansluiting voor netstroomadapter:	Ja
3D:	Ja
Remote (IR) ingang:	1
Temperatuur bij opslag:	-20 - 60 °C
Remote (IR) uitgang:	1
HDMI in:	1
RJ-45 uitgang ports:	1
HDCP versie:	1.4
IR-doorvoer:	Ja
RJ-45 invoer ports:	1
Maximaal bereik:	50 m
Bedrijfstemperatuur (T-T):	0 - 40 °C
HDCP- & EDID-omzeiling:	Ja