Blomberg GIN 9260 E Handleiding

Blomberg Vaatwasser GIN 9260 E

Lees hieronder de 📖 handleiding in het Nederlandse voor Blomberg GIN 9260 E (2 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

QUICK REFERENCE GUIDE GB

Programme Table

Programme number 1 2 Reference* 3 4 5

Programme name

Cleaning temperature

Degree of Soiling Suitable for removing the

remnants on the soiled

dishes that will be kept

waiting in the machine for

a few days, and thus, for

preventing the bad odor

buildup.

Most economical washing

program for the medium soiled

daily dishes that are kept waiting.

Daily washing program at which

the medium soiled dishes that are

kept waiting are cleaned in the

fastest way.

Suitable for heavily soiled dishes,

pots and pans.

Determines the soiling degree of the

dishes and sets the temperature and

amount of the washing water as well

as the washing time automatically.

Suitable for all types of dishes.

- Medium Medium High Medium to high

Detergents

A=25 cm³/15 cm³ B=5 cm³ - A+B A+B A+B A

Programme sequence

(without options)

Pre-wash

▼

End

Pre-wash

▼

Wash

▼

Cold rinse

▼

Hot Rinse

▼

Dry

▼

End

Wash

▼

Cold rinse

▼

Hot Rinse

▼

Dry

▼

End

Pre-wash

▼

Wash

▼

Cold rinse

▼

Hot Rinse

▼

Dry

▼

End

The programme sequence is

adjusted to the amount of soiling

Duration (min) 15 30 155 58 136

Water (I) 4 10,2 13 10,2 14,8

Energy (kWh) - 0,75 1,09 1,24 1,45

Left-on mode / Off mode (W) *** 0.48 / 0.05

The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.

* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme.

*** Power consumption in off-mode and left-on mode are measured according to EN 62301.







 �

 �

 �

  � �

How to use your dishwasher:

• Open the water tap.

• Plug to the mains.

• Open the door and load the dishwasher. Check if both upper

and lower spray arms move freely.

• Fill enough detergent into the detergent dispenser and close

the door.

• Use the on / off button to turn the machine on.

• Check the salt and rinse aid level indicator lights. If necessary,

refill salt and/or rinse aid.

• Use the programme selection button to choose your washing

programme.

• When there are few dishes, additionally use the Half Load

button.

• Start the programme with the Start/Pause button:

Attention

Avoid opening the door during the washing process. This interrupts

the washing process, and hot steam will escape. When the door is

closed, the programme will continue.

• Use the on / off button to turn the machine off again. When

the progress indicator light “programme end” lights up, the

programme is complete.

• Close the water tap. Pull out the plug.

• Allow your dishes to cool for 15 minutes, with the door open.

Unload the dishes. Begin with the lower basket.

! Attention:Please read the operating manual prior to operating the machine for the first time.

50°C 70°C 40°C - 65°C

Pre-wash Economy Intensive Auto

Rinse aid level indicator light

Salt level indicator light

LED progress indicator lights

Programme indicator lights

Start/Cancel button

Programme selection button

Combi Tablet button

10 On/Off button

A Express 58'

60°C-

Time Delay indicator lights

Time Delay button

QUICK REFERENCE GUIDE GB

Start/cancel button

You use this button to start the selected program; the light on the

button lights up.

Stop the program with the start/cancel button if you would like to

open the door once the dishwasher’s washing program is running.

LED progress indicator lights

The program sequence throughout the

washing process can be monitored from the

progress indicator lights on the control panel.

Warning!

Following the washing stage, in order to drain

and remove water from inside the machine completely, the machine

will pause for approximately 35 minutes. Do not worry this is not a

fault. Then End progress indicator light will come on.

Warning!

Do not switch the machine off before End light comes on.

How to cancel the washing program

Press start/cancel button for 3 seconds. The indicator light will start

flashing. The machine will drain the water inside the machine for

45 seconds. The programme is cancelled when start/stop indicator

light goes off. Then, you can choose and start a new programme.

Important:!

Depending on the stage of the program you have cancelled, there

may be detergent residue or rinse aid inside the machine and

on the load. Make sure the items in the dishwasher are not used

before washing properly.

How to change the washing programme

To change a running programme, press the start/cancel button: The

programme light turns off.

Select a new programme and start it with the start/cancel button:

The respective programme light lights up.

Important:!

The new program will NOT start right from the beginning. It will start

from the stage last carried out by the previous program selection.

On/off button

You turn your dishwasher on / off with this button. When turning on,

the indicator light for the last used programme will light up.

Salt level indicator light

When this indicator light comes on, you must

refill special salt (If applicable).

In machines which do not possess an electrical

salt indicator, the salt content can be read on

the container for the salt. When the visual fill

indicator is dark, there is enough salt in the

container.

When the colour is light, open the container and add dishwasher

salt.

Rinse aid level indicator light

If this indicator light comes on, you have to refill

rinse aid (If applicable).

You can also tell whether rinse aid must be

refilled by looking at the rinse aid dispenser.

When the visual fill indicator is dark, there is

enough rinse aid in the dispenser.

When the colour is light, open the dispenser and

refill rinse aid.

Program selection button

Use the programme selection button to select the desired

programme. The corresponding programme light lights up.

Improper Loading Of Dishware







 �

 �

 �

  � �

17 7781 01 00_AB





























Visual Indicator

Wash

Rinse

Dry

End

Combi Tablet Button

Allows to obtain a better drying performance from the multi-purpose

detergents called as all in one detergents such as 2in1, 3in1, 4in1,

5in1 and etc., depending on the hardness level of the tap water. The

programs in which the Combi Tablet function can be enabled are

indicated in the Program Data and Table of Average Consumption

Values. Combi Tablet symbol lights up when you select the Combi

Tablet function.

Rinse aid level indicator light

Salt level indicator light

LED progress indicator lights

Programme indicator lights

Start/Cancel button

Programme selection button

7Combi Tablet button

10 On/Off button

Time Delay indicator lights

Time Delay button

Time delay

With the delay function of your machine, you may delay the starting

time of the program up to 3-6-9 hours using the Time delay button.

3-6-9 hour lamps will start flashing respectively, each time you

press the delay button. If you press the Start/Cancel button while

the desired delay lamp is flashing, then the delay lamp comes

on constantly and the function is saved to the memory. As of this

moment, the countdown starts. Upon completion of the delay

period, the delay lamp will go off and the selected washing program

will start.

If you press the Delay Button when the 9 hours delay lamp is

flashing, then the delay lamps goes off. If you press the Start/

Cancel button when the Delay Lamps are not lit, then the selected

program will start without any delay.

You may follow the remaining delay period from the delay lamps.

For example: If you select the 9 hours delay option, then the 6

hours lamp will come on when there is 6 hours remaining to the

start of washing program and 3 hours lamp will come on when there

is 3 hours remaining.

Changing the delay period

Press Start/Cancel button. The Delay period lamp will start flashing.

You may choose the new delay time by pressing the delay button

again.

Press Start/Cancel button again to save the setting.

Product specificaties

Merk:	Blomberg
Categorie:	Vaatwasser
Model:	GIN 9260 E
Apparaatplaatsing:	Semi-ingebouwd
Breedte:	570 mm
Diepte:	820 mm
Hoogte:	600 mm
Aantal couverts:	- couverts
Deurkleur:	Niet van toepassing
Uitgestelde start timer:	Ja
Droogklasse:	A
Duur cyclus:	155 min
Geluidsniveau:	49 dB
Energie-efficiëntieklasse (oud):	A
Waterconsumptie per cyclus:	13 l
Wasklasse:	A
Aantal wasprogramma's:	5
Kleur bedieningspaneel:	Roestvrijstaal
Zout indicator:	Ja
Afwasprogramma's:	Auto 45-65°C, Eco, Intensive, Pre-wash, Quick
Energieverbruik per cyclus:	1.09 kWu
Sensor programma selectie:	Ja
Wasprogramma's:	Voorwassen
Snel wassen:	Ja
Aanpasbaar interieur:	Ja