Blaupunkt VX 170 2 VELOCITY Handleiding
Blaupunkt
Autospeaker
VX 170 2 VELOCITY
Lees hieronder de 📖 handleiding in het Nederlandse voor Blaupunkt VX 170 2 VELOCITY (11 pagina's) in de categorie Autospeaker. Deze handleiding was nuttig voor 112 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/11
VX 130.2, VX 170.2, VX 170.3,
VRX 130.1, VRX 170.1, VRX 200.1
Notes on installation and operation
Hinweise zur Installation und Bedienung
Conseils pour l’installation et l’utilisation
D
F
GB
2
INTRODUCTION
Congratulations on your purchase of the world’s finest brand of car audio speakers.
We have invested tremendous effort in the design process of the new Velocity speaker series, in order to achie-
ve superior musical performance. For maximum performance and reliability we highly recommend that your new
Velocity speakers be installed by an authorized Velocity dealer.
For additional information on the Velocity Product Line visit our internet site at: http://www.velocity.de.
Safety Considerations
Before starting to mount your speaker, read the mounting and connection instructions carefully. Disconnect the
vehicle battery's negative terminal before making connections. Be sure to observe the safety notes of the Auto-
mobile manufacturer (airbags, alarm systems, onboard computers, immobilisers).
Before drilling holes, look to see what is on the other side- making holes into the battery, wiring looms or fuse
box is not recommended.
SOUND QUALITY VS. LOUDNESS
SOUND QUALITY
A good audio system will faithfully reproduce the original recording by offering accurate frequency response and
staging. Good frequency response reproduces high tones such as cymbals, through human voices and most
instruments, and down to the very low tones from synthesisers and drums. Frequency response includes timbre
(the accurate replication of an instrument), linearity (the tonal quality is the same regardless of volume level),
and clarity (lack of distortion of the original signal). Velocity speakers address these properties by having a very
smooth frequency response with low distortion levels.
Good staging offers the illusion of a stage upon which players are located and it has a sense of height, width,
and depth. Imaging is a sound system’s ability to correctly place the instruments on the imaginary stage. Again,
the Velocity speakers excel here due to angled tweeter mounting and smooth off-axis frequency response ensu-
ring accurate reproduction.
MULTI-CHANNEL/HIGH POWER
Moving up to a 4x50 watt satellite channel amplifier powering four sets of components and a 2x100 watt sub-
woofer amplifier powering a Velocity subwoofer can offer stunning performance!
The increase in amplifier power help reduce ”clipping“ which yields a ”cracking“ type of sound which can damage
nearly any speaker over time. The tonal accuracy of the system is also often improved because the amplifiers
are no longer strained at high listening levels.
MECHANICAL AND ELECTRICAL INSTALLATION
MOUNTING COMPONENT SPEAKERS
The prime objectives of component speaker mounting are:
• Positioning the speakers correctly.
• Mounting them to a solid surface
• Making sure there are no air leaks between the front and back of the woofers cone
• Protecting the speakers
• Ensuring the wiring is correct
The lower the frequencies a speaker reproduces, the more solid it´s mounting surface must be.
This is necessary because a vibrating panel winds up acting like another loudspeaker and introduces its own
sound into the car. This secondary sound can severely degrade the sound of the music yielding a ”muffled“ or
”howling“ sound at certain listening levels. A good air seal isolating the sound from the back of the speaker from
the front wave sound is critical. Lack of a good air seal reduces the bass response and often creates a ”hollow“
sound from the woofer .
The tweeter´s mounting is not nearly so critical since it does not require a rear air seal and it vibrates very little.
Speaker wiring must be isolated from the electrical system of the car and routed away from any factory systems
to avoid potential noise pickup. Use braided wire with 2.5 to 4 mm
2 cable cross section.
GB
3
DEUTSCH ENGLISH
FRANÇAIS
FINAL WOOFER INSTALLATION
INSTALLING THE WOOFERS IN FACTORY LOCATIONS
Most of today´s newer cars have speaker grilles which blend in aesthetically with the interior of the car. The grille
is usually held in with small screws or spring clips. To remove a clipped on grille, gently pry up on the side with a
flat blade screwdriver. (Some grilles are an integral part of the door such that the entire door panel must be
removed to expose the speaker.) Once the factory speaker is exposed, remove the hardware and replace the
factory unit with the new Velocity unit.
REAR DECK MOUNTING
Rear deck or sail panel installations are easily accommodated with these speakers since the woofers can often
drop into factory holes or may require a simple adaptor plate which can be purchased or formed from wood.
FINAL TWEETER INSTALLATION (see page 8/9)
The biggest advantage of Velocity component speakers is their ability, when properly installed, to provide a
tonally accurate sound with a wide sound stage but pinpoint localisation of performers. The largest impact over
this sound stage is provided by the tweeter location. To determine this optimal location we recommend a simple
experiment.
1. Complete all of the installation except for the tweeters (i.e., woofers, crossover and wiring).
2. Have a friend sit in the passenger´s seat while you sit in the driver´s seat, each holding a Velocity tweeter up
to the door.
3. With music having good high frequency content, move the tweeters around listening for the best high frequen-
cy response yet maintaining a good left/right acoustical balance in the car.
Mounting the tweeters mid level and as far forward in the door panel is often the best acoustical location in
most cars. In most cases, the preferred location usually has the tweeters facing the opposite occupant in the
car.
4. Enjoy the music, with good tonal balance and good staging in your car.
Modifications0 reserved
Product specificaties
| Merk: | Blaupunkt |
| Categorie: | Autospeaker |
| Model: | VX 170 2 VELOCITY |
Heb je hulp nodig?
Als je hulp nodig hebt met Blaupunkt VX 170 2 VELOCITY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Autospeaker Blaupunkt
5 Juli 2024
1 Juni 2023
16 Mei 2023
12 Mei 2023
9 Mei 2023
7 Mei 2023
2 Mei 2023
2 Mei 2023
1 Mei 2023
28 April 2023
Handleiding Autospeaker
- Autospeaker Philips
- Autospeaker Sony
- Autospeaker JVC
- Autospeaker JBL
- Autospeaker Kenwood
- Autospeaker Pioneer
- Autospeaker Alpine
- Autospeaker Auna
- Autospeaker Autotek
- Autospeaker Axton
- Autospeaker Boss
- Autospeaker DLS
- Autospeaker Dnt
- Autospeaker Emphaser
- Autospeaker ESX
- Autospeaker Focal
- Autospeaker Fusion
- Autospeaker Hertz
- Autospeaker Hifonics
- Autospeaker Ices
- Autospeaker Infinity
- Autospeaker Kicker
- Autospeaker Lanzar
- Autospeaker Mac Audio
- Autospeaker Magnat
- Autospeaker Marquant
- Autospeaker Mr Handsfree
- Autospeaker Mtx Audio
- Autospeaker Pyle
- Autospeaker Renegade
- Autospeaker Renkforce
- Autospeaker Rockford Fosgate
- Autospeaker Soundstream
- Autospeaker JL Audio
- Autospeaker Clatronic
- Autospeaker Caliber
- Autospeaker Exibel
- Autospeaker Clarion
- Autospeaker Crunch
- Autospeaker Metra
- Autospeaker AudioControl
- Autospeaker Deaf Bonce
- Autospeaker Aquatic AV
- Autospeaker Planet Audio
- Autospeaker SoundMAX
- Autospeaker Memphis Audio
- Autospeaker Sinustec
- Autospeaker Sinus Live
- Autospeaker Audiotec Fischer
Nieuwste handleidingen voor Autospeaker
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
13 December 2024
26 November 2024