Blackstar ID:Core Stereo 40 V2 Handleiding

Blackstar Gitaarversterker ID:Core Stereo 40 V2

Lees hieronder de 📖 handleiding in het Nederlandse voor Blackstar ID:Core Stereo 40 V2 (54 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 147 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/54
Designed and Engineered by
Blackstar Amplication UK
Owner’s Manual
ID:CORE STEREO 10 V2, ID:CORE STEREO 20 V2,
ID:CORE STEREO 40 V2
IMPORTANT SAFETY INSTR
English
4
Warning!
Important safety information!
READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL
INSTRUCTIONS FOR FUTURE REFERENCE!
Follow all warnings and instructions marked on the product!
Danger! High internal operating voltages.
Do not open the equipment case. There are no user serviceable parts in this
equipment. Refer all servicing to qualied service personnel.
Clean only with a dry cloth.
Condensation can form on the inside of an amplier if it is moved from a cold
environment to a warmer location. Before switching the unit on, it is recommended
that the unit be allowed to reach room temperature.
Unauthorised modication of this equipment is expressly forbidden by Blackstar
Amplication Ltd.
Never push objects of any kind into ventilation slots on the equipment casing.
Do not expose this apparatus to rain, liquids or moisture of any type.
Avoid placing vessels lled with liquid on top of the amplier.
Do not place this product on an unstable trolley, stand or table. The product may
fall, causing serious damage to the product or to persons!
Do not cover or block ventilation slots or openings.
This product should not be placed near a source of heat such as a stove, radiator,
or another heat producing amplier.
Use only the supplied power cord which is compatible with the mains voltage
supply in your area.
Power supply cords should always be handled carefully and should be replaced if
damaged in any way.
Never break o the earth (ground) pin on the power supply cord.
The power supply cord should be unplugged when the unit is to be unused for long
periods of time.
Before the unit is switched on, the loudspeaker should be connected as described
in the handbook using the lead recommended by the manufacturer.
Always replace damaged fuses with the correct rating and type.
Never disconnect the protective mains earth connection.
High loudspeaker levels can cause permanent hearing damage. You should
therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear
hearing protection if continuously exposed to high levels.
If the product does not operate normally when the operating instructions are
followed, then refer the product to a qualied service engineer.


Product specificaties

Merk: Blackstar
Categorie: Gitaarversterker
Model: ID:Core Stereo 40 V2
Kleur van het product: Zwart
Gewicht: 6200 g
Breedte: 434 mm
Diepte: 336 mm
Hoogte: 185 mm
Aan/uitschakelaar: Ja
Type aansluitplug: 3,5 mm
Connectiviteitstechnologie: Bedraad
Type stroombron: AC
Aantal USB 2.0-poorten: 1
Gemiddeld vermogen: 40 W
Geschikt voor: Elektrische gitaar
Aantal luidsprekers: 2
Volumeregeling: Draaiknop
Audio-uitgangskanalen: 2.0 kanalen
AUX ingang: Ja
Soundeffecten hoeveelheid: 12
Ingang van 6,35 mm (1/4-inch): 1
Toonregeling: Ja
Bestandsgrootte luidspreker-stuurprogramma: - "
Versterkingsregeling: Ja
Pedaalstekker: Ja
Draagband: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Blackstar ID:Core Stereo 40 V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Gitaarversterker Blackstar

Handleiding Gitaarversterker

Nieuwste handleidingen voor Gitaarversterker