Black And Decker XTC60K Handleiding

Black And Decker Schroefmachine XTC60K

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker XTC60K (11 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Ireland

Australia

New Zealand

www.blackanddecker.co.uk

2 1

6 2

Intended use

Your Black & Decker impact screwdriver has been designed

for screwdriving applications and for drilling pilot holes in

wood, metal and plastics.

This tool is intended for consumer use only.

Your Black & Decker charger has been designed for charging

the battery in the tool with which it was supplied.

General safety rules

Warning! Read all instructions. Failure to follow all instructions

listed below may result in electric shock, fire and/or serious

injury. The term “power tool” in all of the warnings listed

below refers to your mains operated (corded) power tool or

battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

1. Work area

a. Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust.

Power tools create sparks which may ignite the dust or

fumes.

c. Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of

electric shock.

b. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of electric

shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of

electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may

result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in

the off position before plugging in.

Carrying power tools with your finger on the switch or

plugging in power tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench before turning

the power tool on.

A wrench or a key left attached to a rotating part of the

power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance

at all times.

This enables better control of the power tool in unexpected

situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts.

Loose clothes, jewellery or long hair can be caught in

moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used.

Use of these devices can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application.

The correct power tool will do the job better and safer at

the rate for which it was designed.

b. Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c. Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Product specificaties

Merk:	Black And Decker
Categorie:	Schroefmachine
Model:	XTC60K
Gewicht:	900 g
Stroombron:	Batterij/Accu
Oplaadtijd:	8 uur
Accu/Batterij voltage:	6 V
Stationair toerental (max):	2100 RPM
Reverse:	Ja
Schroefdiameter:	6.35 mm
Batterijtechnologie:	Nikkel-Metaalhydride (NiMH)