Black And Decker GT517 Handleiding

Black And Decker Heggenschaar GT517

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker GT517 (80 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/80
GT450
GT480
GT501
GT502
GT510
GT515
GT516
GT517
2
AB
C1 C2
English (Original instructions) 3
Deutsch (Übersetzung der Originalanleitung) 9
Français (Traduction des instructions d'origine) 16
Italiano (Traduzione delle istruzioni originali) 22
Nederlands (Vertaling van de originele instructies) 28
Español (Traducción de las instrucciones originales) 34
Português (Tradução das instruções originais) 41
Svenska (Översättning av de ursprungliga anvisningarna) 47
Norsk (Oversettelse av de opprinnelige instruksjonene) 53
Dansk (Oversættelse af de originale instruktioner) 59
Suomi (Alkuperäisten ohjeiden käännös) 65
Ελληνικά (Μετάφρασητωναρχικώνοδηγιών) 71
3
ENGLISH
Intended use
Your Black & Decker hedge trimmer has been designed for
trimming hedges, shrubs and brambles. This tool is intended
for consumer use only.
Safety instructions
General power tool safety warnings
@ Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres,suchasinthepresenceofammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
powertoolwhileyouaretiredorundertheinuence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.

Product specificaties

Merk: Black And Decker
Categorie: Heggenschaar
Model: GT517

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker GT517 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Heggenschaar Black And Decker

Black And Decker

Black And Decker BCSS820 Handleiding

26 Augustus 2024
Black And Decker

Black And Decker GT5055 Handleiding

16 Juni 2023
Black And Decker

Black And Decker GT360 Handleiding

7 Juni 2023
Black And Decker

Black And Decker BCSS18 Handleiding

6 Juni 2023
Black And Decker

Black And Decker BEHTS501 Handleiding

16 Mei 2023
Black And Decker

Black And Decker LHT218 Handleiding

13 Mei 2023
Black And Decker

Black And Decker GT241 Handleiding

10 Mei 2023
Black And Decker

Black And Decker GTC3655L Handleiding

9 Mei 2023
Black And Decker

Black And Decker GT233 Handleiding

6 Mei 2023
Black And Decker

Black And Decker GT535 Handleiding

5 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Ferm

Ferm FCGS 18 Handleiding

10 December 2024
Gardena

Gardena Set AccuCut Li Art. 9852-33 Handleiding

17 December 2024
Powerplus

Powerplus POW615 Handleiding

1 Oktober 2024
Makita

Makita DUH604S Handleiding

21 December 2024
Gardena

Gardena THS 500-48 Art. 8883 Handleiding

17 December 2024
Anova

Anova E60HT Handleiding

20 December 2024
Turbo-Silent

Turbo-Silent HS 6060 Handleiding

17 December 2024
Turbo-Silent

Turbo-Silent HS 5542 Handleiding

17 December 2024
Bavaria

Bavaria BPH 2652/1 Handleiding

5 December 2024
Powerplus

Powerplus POW6128 Handleiding

1 Oktober 2024