Black And Decker BT2504AE Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker BT2504AE (20 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
www.blackanddecke com.aur.
Australia
New Zealand
BT2504AE-XE
Fig. 1
1
3
13
14 2
9
10
11
12
456
7
8
15
Know Your Table Saw (Fig. 1).
1. Rear table extension
2. Upper blade guard
3. Left side table extension
4. Main Table
5. Rip fence
6. Right side table extension
7. Extension support
8. Handwheel handle
9. Saw blade tilt lock handle
10. No-Volt-Release (NVR) switch
11. Rip fence & mitre gauge storage
12. Mounting holes (tablesaw to stand)
13. Push-stick
14. Mitre gauge
15. Table saw stand
2
1
2
5
4
6
7
Stand Assembly (Fig. 2)
1. Use the neck bolts (1), and nuts (2) to
assemble the leg set parts.
2. Attach a leg (4) to the Upper Front support (5). Attach another
leg to the opposite end. Tighten with neck bolt (1 ) and nut (2 ).
4. Repeat this assembly for the remaining two legs, Upper Rear (3 )
5. Insert the leg pag (6) into the leg.
3. Attach Bottom Front support (7) between the legs.
6. Attach Upper Side support (8) and Bottom Side support (9)
between the legs. Tighten with neck bolt and nuts.
7. Place the leg set upright on a level service, adjust and
tighten all nuts and bolts.
and Bottom Rear support (7 ). Tighten with neck bolt and nut.
Finger tighten with neck bolt and nut.
8
9
Upper Side support (8)
Bottom Side support (9)
Upper Front support (5)
Upper Rear support (3)
3
Bottom Front and
Neck Bolts x 16 Nuts x 16
Bottom Rear support (7 )
Assemble Base Cover To Table Saw
NOTE:Your saw is supplied with the base cover unassembled.
Assemble (1) to unit (2) using the 4 screws (3) supplied in bag.
2. Tighten the 4 screws (3) before mounting onto the stand.
1. 2
1
3
3
3
3
3
Fig. 2
ENGLISH
(Original instructions)
Attach table saw unit to stand
Aligning the 4 holes (5) on table saw unit to stand.
1.
5
Secure the connection using long hex bolt, washer and nuts.
2.


Product specificaties

Merk: Black And Decker
Categorie: Zaagmachine
Model: BT2504AE

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker BT2504AE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaagmachine Black And Decker

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine