Bixolon STP-103DKG Handleiding

Bixolon Labelprinter STP-103DKG

Lees hieronder de 📖 handleiding in het Nederlandse voor Bixolon STP-103DKG (28 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

POWER ERROR

FEED ON LINE

KN04-00003A

Rev. 2.6

STP-103

THERMAL PRINTER

www.samsungminiprinters.com

USER’S MANUAL

Safety Precautions

In using the present appliance, please keep the following safety

regulations in order to prevent any hazard or material damage.

Violating following instructions can cause serious injury or death.

Do not plug several products in one

multi-outlet.

This can provoke over-heating and a fire.

If the plug is wet or dirty, dry or wipe it

before usage.

If the plug does not fit perfectly with the

outlet, do not plug in.

Be sure to use only standardized multi-

outlets.

You must use only the supplied adapter.

It is dangerous to use other adapters.

Do not pull the cable to unplug.

This can damage the cable, which is the

origin of a fire or a breakdown of the printer.

Keep the plastic bag out of children’s reach.

If not, a child may put the bag on his head.

Do not plug in or unplug with your hands

wet.

You can be electrocuted.

Do not bend the cable by force or leave it

under any heavy object.

A damaged cable can cause a fire.

If you observe a strange smoke, odor or

noise from the printer, unplug it before

taking following measures.

Switch off the printer and unplug the set from

the mains.

After the disappearance of the smoke, call

your dealer to repair it.

WARNING

PROHIBITED

ONLY SUPPLIED ADAPTER

TO UNPLUG

PRINTER

PROHIBITED

Violating following instructions can cause slight wound or damage the appliance.

Keep the desiccant out of children’s

reach.

If not, they may eat it.

Install the printer on the stable surface.

If the printer falls down, it can be broken

and you can hurt yourself.

Use only approved accessories and do

not try to disassemble, repair or remodel

it for yourself.

Call your dealer when you need these

services.

Do not use the printer when it is out of

order. This can cause a fire or an

electrocution.

Switch off and unplug the printer before

calling your dealer.

Do not let water or other foreign objects

in the printer.

If this happened, switch off and unplug the

printer before calling your dealer.

WARNING

PROHIBITED

PRINT.ER

PRINER

DISASSEMBLING

PROHIBITED

PRINTER

PROHIBITED

PRINTER

DEALER

TO UNPLUG

PROHIBITED

Warning – U.S

This equipment has been tasted and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and uses in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

This equipment has been tasted and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Notice - Canada

This Apparatus complies with class "A" limits for radio interference as specified in

the Canadian department of communications radio interference regulations.

Introduction

The STP-103 and STP-103P Roll Printer are designed for use with electronic

instruments such as system ECR, POS, banking equipment peripheral equipment,

etc.

The main features of the printer are as follows:

1. High speed printing.

2. Low noise thermal printing.

3. RS-232 serial interface (STP-103S), Parallel interface (STP-103P).

4. The data buffer allows the unit to receive print data even during printing.

5. Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new

STP-103S and STP-103P.

NOTE

The socket-outlet shall be near the equipment and it shall be easy accessible.

Product specificaties

Merk:	Bixolon
Categorie:	Labelprinter
Model:	STP-103DKG
Kleur van het product:	Grijs
Gewicht:	580 g
Breedte:	100 mm
Diepte:	191 mm
Hoogte:	90 mm
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
RS-232:	Ja
Temperatuur bij opslag:	-10 - 50 °C
Compatibele besturingssystemen:	Windows 95/98/ME/NT4.0/XP/2003
Luchtvochtigheid bij opslag:	10 - 90 procent
Stroomverbruik:	1500 mA
AC-adapter, uitgangsspanning:	24 V
Maximale resolutie:	200 x 200 DPI
Mediadikte:	0.06 - 0.09 mm
Maximum roll diameter:	60 mm
Printtechnologie:	Thermo transfer
Buffergrootte:	15 KB
Maximale print breedte:	48 mm
Printsnelheid (metrisch):	50 mm/sec
Wifi:	Nee
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 80 procent
Ondersteunde papierwijdte:	57 mm
Gemiddeld aantal cycli tussen storingen (MCBF):	15000000