Bissell CleanView 1332 Handleiding

Bissell Stofzuiger CleanView 1332

Lees hieronder de 📖 handleiding in het Nederlandse voor Bissell CleanView 1332 (16 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

1332, 1327, 1322, 1328 SERIES

*Product images may vary

CLEANVIEW ®

USER GUIDE

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY:

» Always connect to a polarized

outlet (one slot is wider than the

other). Do not modify the polar-

ized plug to fit a non-polarized

outlet or extension cord.

» Do not leave vacuum cleaner

when it is plugged in. Unplug

from outlet when not in use

and before servicing.

» Do not use outdoors or on

wet surfaces.

» Do not allow to be used as a toy.

Close attention is necessary when

used by or near children.

» Do not use for any purpose other

than described in this User’s

Guide. Use only manufacturer’s

recommended attachments.

» Do not use with damaged cord or

plug. If appliance is not working

as it should, has been dropped,

damaged, left outdoors, or

dropped into water, have it repaired

at an authorized service center.

» Do not pull or carry by cord, use

cord as a handle, close a door on

cord, or pull cord around sharp

edges or corners. Do not run

appliance over cord. Keep cord

away from heated surfaces.

» Do not unplug by pulling on

cord. To unplug, grasp the plug,

not the cord.

» Hold plug when rewinding onto

cord reel. Do not allow plug to

whip when rewinding.

» Do not handle plug or vacuum

cleaner with wet hands.

» Do not put any object into

openings. Do not use with any

opening blocked; keep openings

free of dust, lint, hair, and anything

that may reduce air flow.

» Keep hair, loose clothing, fingers,

and all parts of body away from

openings and moving parts.

» Turn off all controls before

plugging or unplugging

vacuum cleaner.

» Use extra care when cleaning

on stairs.

» Do not use to pick up flammable

or combustible materials (lighter

fluid, gasoline, kerosene, etc.)

or use in areas where they may

be present.

» Do not use vacuum cleaner in an

enclosed space filled with vapors

given off by oil base paint, paint

thinner, some moth proofing

substances, flammable dust, or

other explosive or toxic vapors.

» Do not use to pick up toxic

material (chlorine bleach,

ammonia, drain cleaner, etc.).

» Do not pick up anything that is

burning or smoking, such as

cigarettes, matches, or hot ashes.

» Do not use without filters in place.

» Do not pick up hard or sharp

objects such as glass, nails, screws,

coins, etc.

» Use only on dry, indoor surfaces.

» Keep appliance on a level surface.

» Do not carry the vacuum cleaner

while it is running.

» Unplug before connecting

or disconnecting the TurboBrush®

Tool or TurboEraser® Pet Tool

(on select models).

READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM.

Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance.

When using an electrical appliance, basic precautions should be observed, including the following:

THIS APPLIANCE HAS A

POLARIZED PLUG

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install a proper outlet. Do not change the plug in any way.

www.BISSELL.com

This model is for household use only.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

Quick Start Guide

www.BISSELL.com 3

CARTON CONTENTS

A. Vacuum Base

B. Handle

C. Screws (2)

D. Hose Wand Clip

E. TurboBrush®/TurboEraser®

Pet tool (on select models)

*Note: Crevice tool is located inside Extension Wand

F. Dusting Brush

G. Hose

H. Crevice Tool*

I. Extension Wand

J. Pet Hair Corner Tool

(on select models)

G H I

*Product images may vary

Assembly

1. Slide handle onto machine base

2. Screw 2 screws into existing holes with Phillips-head

screwdriver

3. Insert hose wand clip into back of vacuum base and

twist clockwise

4. Line up tabs on the cuff of the hose with the notches

on back of vacuum, twist hose clockwise to lock into place

5. Slide other end of hose into hose wand base and place

hose over upper hose wrap on the handle

6. Slide tools into place

Product specificaties

Merk:	Bissell
Categorie:	Stofzuiger
Model:	CleanView 1332

Heb je hulp nodig?

Als je hulp nodig hebt met Bissell CleanView 1332 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Stofzuiger Bissell

Bissell MultiClean Spot&Stain 4720 Handleiding

15 November 2024

Bissell CrossWave Pet 2225F Handleiding

18 Augustus 2024

Bissell CrossWave HF2 3848F Handleiding

18 Augustus 2024

Bissell CrossWave X7 Plus Handleiding

2 Juni 2024

Bissell SpotClean Pro 1558 Handleiding

1 September 2023

Bissell Featherweight Handleiding

27 Juli 2023

Bissell SpotClean 3698N Handleiding

30 April 2023

Bissell Big Green 48F3E Handleiding

5 Juli 2023

Bissell Pet Hair Eraser Upright 6750 series Handleiding

30 April 2023

Bissell Pet Hair Eraser Upright 3920 series Handleiding

30 April 2023

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger

Electrolux CompactGo Cyclonic Z1232 Handleiding

23 November 2024

Electrolux Compact Go Z122 Handleiding

23 November 2024

Electrolux Ergorapido ZB3105AK Handleiding

23 November 2024

Electrolux PowerForce EPF63EB-S Handleiding

23 November 2024

Electrolux Ergorapido ZB3114 Handleiding

23 November 2024

Electrolux CompactGo Cyclonic Z1233 Handleiding

23 November 2024

Bosch BGB38HYG1 Handleiding

23 November 2024

LG Kompressor LcV800R Handleiding

22 November 2024

Miele Classic C1 Hardfloor EcoLine Handleiding

21 November 2024

Miele S 381 Handleiding

21 November 2024